Tamiya M41 Walker Bulldog Motorized - (M-41), 1/35, MT143
Vaccuform Model Kit, Box Condition: Good
$69
Rare motorized version features all steel and brass gearbox, all hardware, realistic track drive through the rear sprockets and more. The tank is well detailed and has elevating gun, rotating turret and more. Includes decals for one US Army and two JGSDF tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Please note that Tamiya did not furnish the electric motor with this issue. Any common RE26 motor or equivalent will work.
Tamiya Fiat CR-42 LW - Luftwaffe Night Attacker - Turin Italy April 1944, 1/48, 2640
Plastic Model Kit, Box Condition: Exc
$28
From new molds and a finely detailed model inside and out. Never started and inventoried complete with all parts and includes decals and instructions.
Campbells Custom Kits Busy Bee - 31 Inch Wingspan Introductory Gas Free Flight Aircraft
Wood Model Kit, Box Condition: Exc
$48
Most likely from the 1970s and an ideal first gas-powered free-flight model. Features numerous die-cut parts, fully formed wheels, factory cut strip wood and spars, excellent full size plans, assembly photos and very detailed instructions on flight trimming and flying. Never started and complete.
Midwest Fu-Bar (Fubar) 36 - 36 Inch Wingspan For Sport or Competition Free Flight, FG-2
Wood Model Kit, Box Condition: Good
$62
Built for 'Sniffing Thermals', the honored pastime of a generation of model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and early gas powered models, all powered by Brown engines, took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) models could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all without any operator inputs once the airplane took off. Getting the wing up out of the propeller airflow was a huge improvement, and this type of design proliferated. This is one example of a parasol style 1940s free-flight competition aircraft designed by Ray Matthews. This quality kit includes die-cut printwood, strip wood, finished nose wheel, tissue and beautiful full size plans. The model has not been started. Inventoried 100% complete with all parts and paperwork present.
Midwest Wally Simmers' Sniffer - 29.5 Inch Wingspan Contest or Sport Free flight Model Airplane, SN-301
Wood Model Kit, Box Condition: Exc
$62
Built for 'Sniffing Thermals', the honored pastime of a generation of model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and early gas powered models, all powered by Brown engines, took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) models could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all without any operator inputs once the airplane took off. Getting the wing up out of the propeller airflow was a huge improvement, and this type of design proliferated. This is one example of a parasol (with a clever cabin) style 1940s free-flight competition aircraft designed by Wally Simmers. This quality kit includes die-cut printwood, strip wood, fully finished wheels, fully formed wire landing gear struts, die-cut clear windshield, covering tissue and beautiful full size plans. The model has not been started. Inventoried 100% complete with all parts and paperwork present. Please note that while no work has been done, some parts are neatly (adult) punched out, mainly wing ribs.
Lindberg Douglas A4D-1 Skyhawk - (A-4), 1/48, 529-79
Plastic Model Kit, Box Condition: Good+
$52
Rare early issue of the Prototype Skyhawk from the mid 1950s. This is the smallest box that anyone has dared place a 1/48 scale A-4 in and the classic box art is by Ray Gaedeck Box. For some reason, this issue is rarer than the other Lindberg kits of that time. This model represents the very early Skyhawk, which is no surprise; Lindberg, like Aurora, often tried to be 'first to market' and did not hesitate to use prototypes for kits. Features detailed jet engine, opening inspection panel, pilot and ejection seat, opening canopy, full landing gear, centerline drop tank, wing rockets and display stand. Never started and inventoried 100% complete with all parts, decals and instructions. The box is graded 'good+' because you can just see a very light stain on and below the drop tank.
Lindberg LCVP Landing Craft Vehicle Personnel - PA-291 (L.C.V.P.) - Motorized, 1/32, 766M-198
Plastic Model Kit, Box Condition: Good
$64
1965 hardbox issue; likely the third issue and the first without Ray Gaedke artwork. Motorized for operation in water and features defensive machine guns, operating ramp and 6 figures - 3 Navy and 3 Army troops. Back in the day it was considered a nicely detailed large scale kit. The kit has never been started. Inventoried 100% complete including decals, flag sheet and instructions.
Lindberg F-86D Sabre Jet Fighter, 1/48, 522-98
Plastic Model Kit, Box Condition: Exc+++
$89
Hard-to-find 1950s issue with incredible Ray Gaedke artwork. The box is in superb 'excellent+++' condition with like-new color and gloss, four solid corners, no price tags or tag marks, no tape or tape marks (except for the factory sealing tape of course), no fading and no litho damage. The only flaws are very slight wear. Features pilot and ejection seat, two piece canopy, optional fuselage rocket tray, full landing gear, two wing drop tanks and 8 wing mounted rockets. Molded in silver and clear and includes a display stand and very colorful decals for the box art aircraft Never started. Inventoried 100% complete with all parts, 'near mint' condition decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Lindberg Messerschmitt Me-262, 1/48, 538-100
Plastic Model Kit, Box Condition: Good-
$42
Late 1950/early 1960s issue with dramatic Gaekdke artwork. This popular model was the first accurate '262 ever released and features detailed jet engines with removable cowls, retractable landing gear, detailed gun bay with removable cover, hinged cockpit canopy and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Marvel Douglas 8A-5 / A-33 Attack Bomber - Battle Planes Of America Series - Solid Wood Aircraft, 1/48
Wood Model Kit, Box Condition: Fair-
$34
Rare solid model from 1942. At that time, their were 'fliers' and 'solids.' 'Fliers' were notoriously off-scale so they would fly well and also lacked detail. 'Solids' were true scale models that were solid wood and designed only to be scale miniatures (they did not fly). This kit has a worn box missing the end flaps, but inside it is complete with all parts and full-size plans with instructions and a description of this rare aircraft. There are three sheets of printwood and a block for the fuselage. The model has never been started. It has been inventoried complete with all parts and plans present. Please note, this is war time model so compressed fibre-board has been substituted for balsa wood. Marvel Mfg. Company was located in Seaford, Long Island, New York and had an extensive line of solid aircraft, wooden ships, army tanks and more. Just as a small example, the following are advertised on the back of this larger-scale solid kit: Grumman JRF-2, Mariner PBM-1, Bell YFM-1, P-38, P-40, Baltimore, Ryan STM-2, Curtiss AT-9, Douglas A-20A, Republic Guardsman, Grumman Skyrocket and Douglas 8A-5.
Marvel Ryan STM-2 - Combat Planes Of America Series - Solid Wood Aircraft, 1/32
Wood Model Kit, Box Condition: Poor
$29
Rare, large 1/32 scale solid model from 1942. At that time, their were 'fliers' and 'solids.' 'Fliers' were notoriously off-scale and lacked detail so they would fly well. 'Solids' were true scale models that were solid wood and designed only to be scale miniatures (they did not fly). This kit has a very worn box but inside everything is in very good condition. Features a 12 inch wingspan, balsa blocks and wood stock, printwood, color insignia sheet and quality plans with construction notes, cross section templates as well as a painting guide. Never started and complete. Marvel Mfg. Company was located in Seaford, Long Island, New York and had an extensive line of solid aircraft, wooden ships, army tanks and more. Just as a small example, the following are advertised on the back of this larger-scale solid kit: Grumman JRF-2, Mariner PBM-1, Bell YFM-1, P-38, P-40, Baltimore, Ryan STM-2, Curtiss AT-9, Douglas A-20A, Republic Guardsman, Grumman Skyrocket and Douglas 8A-5.
Marvel Douglas A-20 A Combat Planes of America, 1/64
Wood Model Kit, Box Condition: Good-
$22
Rare kit from 1942. This is a scale, solid wood kit. It features balsa wood, very thick and heavy printed cardstock parts, cardboard template, heavy cardstock props, full size plans with more templates and construction notes. A very simple kit that requires serious carving and shaping skills, but typical of the time! Complete and never started. The paint scheme shown on the aircraft is the pre-war variety. Marvel was a popular manufacture with a large line of army vehicles, tanks of all nations, aircraft and more.
Randles Kellett Autogyro YG-1B - XR-2, 1/42, 103D
Vaccuform Model Kit, Box Condition: VG
$62
Very rare kit from the 1940s. This is a large (17 inch LOA) model of this 1930s craft. This unique ship had no ailerons, rudder or elevator. Directional control was through a pivoting rotor head. Rotor blades folded for storage. The KD-1 made the worlds first autogyro roof-top landing in May of 1935 at the US Post Office in Philadelphia. The plans say this is the XR-2 and YG-1B. The plans certainly look like the YG-1B Army Craft; the YG-1B was modified with a constant speed rotor and became the YG-1C; it was then redesignated XR-2. This craft is also known as a KD-1; the model will built any of the three. Features 2D (profile) carved fuselage, hardwood rotor blades, other precut parts and a sealed envelope of small parts. Includes excellent full size plans with many detail drawings, templates and construction notes. Never started. Complete with all parts, plans and unused glass bottle of glue (some of which is still a liquid). Randles was another name for Ranco and may have simply been the deluxe version of the Ranco kits as they shared the same address. Just a few of those kits include the B-29, Cessna Bobcat, Sikorsky Helicopter and Kellett Auto Giro. There is evidence that they made boat kits also.
Easy Built Models Scatterbrain - 30 inch Wingspan for Free Flight - (Blue Box Issue), FF-13
Wood Model Kit, Box Condition: Sealed Exc
$32
Still factory sealed. Easy Built was a Canadian manufacturer who made excellent reproductions of classic flying designs from the 1930 and 1940s. Original plans were used. High quality modern kit made in the finest tradition of the stick and tissue flyers. Features high quality printed balsa, strip wood, propeller, rubber, full sized plans and other accessories.
Monogram Kenworth W-900 Conventional - Semi Tractor Truck, 1/16, 77402
Plastic Model Kit, Box Condition: Sealed VG
$269
Still factory 'round tape' sealed. This very rare 1/16 scale model is from 1991 and is highly detailed. It features 283 pieces, rolling chassis build-up just like the actual truck, complete engine, full suspension, exhaust and drive line detail, excellent engine compartment, opening hood, sleeper, complete interior, alloy wheels, dual exhaust stacks, twin antennas, 5th wheel, air horns and side mirrors and more.
Revell Fighting Deuces Spitfire MkII And Me-262, 1/72, H221-100
Plastic Model Kit, Box Condition: Good-
$38
Dated 1969 and part of the 'Fighting Deuces Series' that includes both kits and new box art. Revell was famous for the 'series' concept; older kits were put into boxes with dramatic new art and given series names such as this one, or 'Famous Artist' & 'Famous Aircraft.' Never started. It has been inventoried complete with all parts and includes decals and instructions.
CZ Model Bell P-39 Pursuit - Metal Covered Solid Wood Aircraft Model, 1/48
Wood and Metal Model Kit, Box Condition: VG
$64
Very rare and deluxe model kit from the late 1940s. This kit is from the end of the 'Golden Age' of model aircraft and includes much of the more advanced technology that was coming along at the time. The fuselage is 3D cut, the wings and tails are 2D (profile) cut, clear canopy celluloid with the frames factory painted on in silver, a factory sealed wax bag that includes a cast metal propeller, fully finished nose & main wheels and more, printwood, several sheets of detailed, embossed and pre-cut metal covering for the kit, very detailed and illustrated instructions and full size plans. NOTE: this kit has minor, 'professional' quality sanding as noted: The fuselage and one wing have been sanded. The work is flawless. There is no other work done. The small parts are still in the internal factory sealed envelope and the other parts have been inventoried complete including all paperwork.
CZ Model North American P-51 Mustang - Metal Covered Solid Wood Aircraft Model, 1/48
Wood and Metal Model Kit, Box Condition: Exc
$74
Very rare kit from the late 1940s and in 'excellent' condition inside and out. This kit is from the end of the 'Golden Age' of model aircraft and includes much of the more advanced technology that was coming along at the time. The fuselage is 3D cut, the wings and tails are 2D (profile) cut, there is a resin or chalk cast canopy in 'excellent' condition, cast metal prop, printwood, a sealed bag of small parts, one glass bottles of CZ Adhesive (for gluing metal to paint), several sheets of detailed, embossed and pre-cut metal covering for the kit, very detailed and illustrated instructions and full size plans. The kit has never been started. The small parts are still in the internal factory sealed envelope and the other parts have been inventoried complete including all paperwork.
Cox Golden Bee .049 Gas Engine - Still Factory Tape Sealed And With the Cox Shipping Sleeve, 120
Metal and Plastic Model Kit, Box Condition: Sealed Exc
$139
Very rare in this condition. This is a rare opportunity to own one of these engines exactly as it left the Cox factory. The engine is still factory tape sealed and even includes the nearly impossible to find Cox cardboard sleeve with the part number stamped on the front. Not a kit, but a factory built engine that is NOS - never run and mint. The Golden Bee features an oversize fuel tank with cross vent and filler tubes for 'Longer Flight and Easier Stunting' as one side of the box says. The sleeve is 100% intact has some bug damage on the top as shown and significantly more bug damage on the sides and bottom. There are no holes, only surface damage.
Aurora Bristol F2B Brisfit - (F-2B), 1/48, 113-98
Plastic Model Kit, Box Condition: NM+
$78
1957 first issue with dramatic Jo Kotula artwork. The box is in amazing, investment-grade 'Near Mint' condition. Color and gloss are perfect, as are the four corners. There are no price tags or tape and no marks from either (other than the factory sealing tape, of course). There is no fading, cuts, tears, stains or missing litho. The only flaws are very light wear, mainly on the edges. Molded in the correct gloss dark olive and black plastic. The kit inside is mint and never started. Inventoried 100% complete with all parts, decals and instructions. Decals and instructions are both flat and 'excellent' with typical yellowing as the only flaw.