Plastic Model Kit, Box Condition: VG++
$19
Very well molded and detailed. Features all fine recessed panel lines, detailed cockpit, gear wells and undercarriage. Includes a painting guide and decals for two different aircraft. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$46
Rare, limited run injection molded kit with all fine recessed panel lines and an injection molded canopy. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. In August of 1933, Focke-Wulf responded to a bid from the Technisches Amt of the RLM to develop a twin engine training aircraft. Focke-Wulf was able to design and build it's entry, the FW-58, faster than Arado could theirs. The first flight of Fw-58 V-1 took place on January 18, 1935. There were no problems and the aircraft fulfilled all requirements. This design proved so successful over the years that Fw-58s were used as transition trainers from single to multi-engine as well as these other training rolls: dedicated multi engine, bomber, blind flying and navigation, gunner, radio operators, reconnaissance and more. Fw-58 also served as passenger aircraft with Lufthansa, others flew freight and some were used for search and rescue. Foreign operators were numerous and included Austria, Hungary, Bulgaria, Slovakia and Sweden. The reliability and robustness of the design was legendary. As just one example, the Sweden flew these aircraft until 1960.
Plastic Model Kit, Box Condition: VG+
$29
Very nicely molded kit with all fine recessed panel lines, high-definition cast resin details, excellent cockpit, two types of engine exhaust, wing mounted radar and more. Includes a full paint guide and decals for four different aircraft including one that took part in the strikes on the German Battleship Tirpitz in 1944. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG++
$28
Still factory sealed and from 1976. Features parts to build either version including rare side-by-side two seat version. The markings from RAF No. 45 Squadron 1974 and No. 58 Squadron 1974; there is a three-view, full color painting guide on the back of the box for both aircraft.
Plastic Model Kit, Box Condition: Good-
$18
Nicely done early kit from Frog molds and marketed by Air Lines in the USA. The kit has never been started. Inventoried 100% complete including all parts, decals and instructions. Air Lines manufacturing history: The kits, decals and instructions were made in England, then imported to the USA where Testors created the boxes with the colorful trading cards on the back. There are two trading cards on each box which show the boxart but not the advertising/logo. Some kits contain a Testors color painting guide also, but it is not specific to any model.
Plastic Model Kit, Box Condition: Fair++
$38
Rare first issue hardbox from the late 1950s and a very high quality kit for that time. Features a full hull with propeller & rudder detail, fully detailed deck, nine individually elevating 16 inch guns, rotating main and secondary turrets, fully detailed forward and aft island structures with radar, gun directors and range finders, individually molded 20mm guns with shields, helicopter, flag sheet and full decals including draft markings. Inventoried and NOTE: missing (1) part, the aft crane. Otherwise includes all other parts, decals, flags and instructions. NOTE: some 40mm gun barrels are broken off; some are included, but not all. Fine wire makes a perfect replacement. The two long superstructure walls are both neatly broken at the same place, but fit back together perfectly. Helicopter rotor has one broken blade but is present so you can repair it. 5" gun turrets have some broken barrels but all barrels are present so you can repair them.
Plastic Model Kit, Box Condition: Good+
$125
Very rare and even more so in this condition, which is never started and 100% complete. This is the original issue from late 1965/1966. It features a detailed 425 CID Marauder V-8 engine with dual quads, detailed engine compartment, opening hood, molded-in chassis detail, complete stock or custom interior, many custom options, stock or full custom front and rear end treatments and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires and metal axles. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$329
Insanely rare, investment-grade "Factory Sealed" kit with a box in 'excellent' condition. Very rare one and only issue from late 1959/1960. This exact kit was sold new at Hobbyland Inc in Colorado Springs, Colorado. Both seals are 100% intact and perfect. The actual box is displays better than the 'excellent' grade but is rated as such because there are small litho chips from bugs at the lower corners & bottom of the right short side as well as very tiny chips up one side each of the two short sides. The model features parts to build one of three versions, complete interior, detailed (molded in) underside/chassis, lower blocks, fender mirrors, spotlights, roof and fender aerials, gauges, tach, floor shift, lake pipes, fender skirts, louvers, fins and more. NOTE: this kit must be shipped insured.
Plastic Model Kit, Box Condition: VG++
$325
This kit is dated 1969 and is the second issue of this large and fantastic model of the complete top section of the Saturn V in 1/48 scale. It is over 20 inches tall when assembled and features five highly detailed sections which are removable: Command Module, Service Module, Launch Escape Tower, Lunar Module and Apollo Saturn Adapter Section. Two display bases are included for in flight and for lunar landing. Inside the kit is like new. It has never been started and all parts have been inventoried 100% complete. Includes instructions, "The Apollo Story" booklet, decals and clear window material.
Plastic Model Kit, Box Condition: Good+
$275
Very rare kit from 1964 with artwork by the famous John Steel. The USS Canberra, originally CA-70 (Baltimore Class Heavy Cruiser) was converted to the world's second Guided Missile Cruiser in 1952 and re-designated CAG-2. Her sister Boston was the first CAG and was CAG-1. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: this kit must be shipped insured.
Plastic Model Kit, Box Condition: Exc
$125
Late 1950s rare first issue of this very high quality, full-hull kit. Features a one piece hull, nine individually elevating 16" guns, rotating main and secondary turrets, fully detailed forward and aft island structures with radar, gun directors and range finders, individually molded 20mm guns with shields, helicopter, full rudder and propeller detail, detailed deck, flag sheet and full decals including draft markings. Never started. Inventoried and NOTE: missing one part, the #45 jackstaff. Easily made from wire or pulled sprue as it is simply a flag pole. Includes all other parts, decals and instructions. The decals are flat, 100% intact and in 'excellent' condition but the white and black colors are off-register. If you want to build the model, I recommend the superb Starfighter Decals 1/500 Cold War Cruisers which has multiple sizes of hull numbers in large quantities and much more.
Plastic Model Kit, Box Condition: Sealed VG++
$44
Still factory sealed. East German 'Cold War' kit from the 1970s or early '80s. Large kit of this very successful Soviet flying boat is well molded in popular 1/72 scale.
Plastic Model Kit, Box Condition: Good+
$38
Builds either glider or powered aircraft versions. Older but very well detailed kit with full interior. Contains excellent scale Kubelwagen kit also. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG+
$28
The P1106 was a jet-powered one-seat fighter for very high speeds (possibly supersonic). It was intended to replace the Me P1101 which had already been under construction in 1945. The P1101 served as the basis for the P1106. By rearranging different assembles and changing some geometry better flight performance could be obtained. However, Messerschmidt favored other jet designs because of the very high wing pressure and pilot visibility. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$36
Rare and the only injection molded kit of this aircraft. Features very fine recessed surface detail, good cockpit and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG to Exc
$24
SALE!! Includes two kits but please read carefully for the condition. Both kits are never started. Kit #1 is inventoried 100% complete and includes decals and instructions. Kit #2 is missing the clear canopy and machine gun decal. Otherwise complete. The P1101 was the first aircraft to have variable geometry wings. As part of the Emergency Fighter Program, the Messerschmidt was a promising design but was only about 80% done when the war ended. This model is interesting in that it models the V1 Prototype exactly as it was found by the allies or as a production aircraft. This means you can show the detailed jet engine without the cowling or install the cowl. V1 decal sheet even includes the painted on machine gun/cannon.
Plastic Model Kit, Box Condition: Sealed Exc
$26
Still factory sealed. This model includes optional parts (different vertical & horizontal stabilizers) and decals to build any of the four prototypes. Well molded with all recess panel line detail, 'good' cockpit, pilot figure, injection molded canopy, full landing gear and more. When the Me-209 was dismissed as the 109s successor, design work began on the 309. It was intended to be a high speed, long range heavy attack fighter with an ejection seat and pressurized cockpit. Four were built, but the RLM never assigned any priority to the project. By that time, the jet-powered Me-262 showed more promise and work on the 309 was stopped.
Plastic Model Kit, Box Condition: Sealed Exc+
$22
Still factory sealed. This is a nice 1/48 scale Bearcat with good cockpit detail, optional position canopy, fine recessed panel lines, twin row radial engine, enclosed and detailed landing gear wells, drop tanks, iron bombs and more. Includes large, multi-view paint guides and decals for multiple aircraft.
Plastic Model Kit, Box Condition: Good-
$34
SALE!! Includes two models in one box. Kit #1 is never started and is still factory sealed inside. Kit #2 is never started and inventoried 100% complete. Both include instructions and decals. Very nicely molded kit with all very fine recessed panel line details. Features very good cockpit, optional position entry door, detailed landing gear wells and well-detailed landing gear as well as decals for two aircraft.
Plastic Model Kit, Box Condition: Good
$32
Nicely molded and detailed model that includes parts & decals for both versions and a painting guide. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240