Accurate Miniatures Grumman F3F-1 - (F3F1) US Navy, 1/48, 3413
Plastic Model Kit, Box Condition: Sealed Exc++
$42
Still factory sealed. Very highly detailed kit with over 75 parts. Features excellent part quality, recessed panel lines, weighted or normal tires, photoetched rigging, detailed cockpit and engine and more.
AMT Winnie Mae - Lockheed Vega, 1/48, T642
Plastic Model Kit, Box Condition: Good-
$28
Original issue from the early 1970s with the finest mold quality; not a modern reproduction. Well molded kit of the world-famous aircraft includes an extensive and colorful decal sheet. Never started. The parts are either still factory sealed or have been inventoried complete with all parts and includes decals and instructions. In 1933, Wiley Post made solo flight around the world in the Lockheed Vega 'Winnie Mae'. Not only was it the first solo flight around the world, but it broke the previous record set by Post and his Navigator Harold Gatty. Vegas did see military service, with a few operated by the RAAF, Spanish Republic Air Force, and USAAC. (This kit does not include military decals.)
Airfix Heinkel He-111 P-2 - (He111P-2), 1/72, A06014
Plastic Model Kit, Box Condition: Exc
$35
2015 issue from completely new, state-of-the-art molds. Well detailed inside and out and has 151 pieces. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
GPM Control Tower And Hangar - Laser Cut Model - Bagged, 1/48
Cardstock Paper Model Kit, Box Condition: Exc
$70
Still factory sealed (both). Includes both superb fully-laser cut cardstock models in 1/48 scale, the Control Tower and Aircraft Hangar. There are several build threads for the 1/48 Hangar on the internet and it is most impressive and easy to light with LEDs.
Airfix Bristol Blenheim Mk.IVF - No 248 Coastal Command Lincolnshire England 1940 / Wing Commander Max Aitken CO Of 68 Sq High Ercall Shropshire England 1941, 1/72, A04017
Plastic Model Kit, Box Condition: Exc
$23
Detailed model from all new molds that features 158 pieces, all fine recessed panel lines, detailed cockpit and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram Grumman EA-6B Prowler, 1/48, 85-5619
Plastic Model Kit, Box Condition: Sealed NM
$42
Still factory sealed. 2008 issue is well molded and features raised and recessed panel lines, detailed cockpit, optional position canopies, detailed gear bays, underwing stores and more.
Hasegawa TWO F6F-3 or F6F-5 Hellcat - (F6F5 F6F3), 1/72, C12
Plastic Model Kit, Box Condition: VG to Exc
$24
SALE!! Includes two models in the original boxes. Ideal builder kits, please read carefully for the condition. NOTE: these models have 'professional' quality subassembly as follows: Kit #1: wing halves; cockpit tub. There is no other assembly. Inventoried complete with all parts, decals and instructions present. Kit #2: wing halves; bulkhead, seat and instrument panel to floor; engine to firewall. There is no other assembly. Inventoried complete and includes decals and instructions. Both are well molded kit with very good detail. Includes parts for -3 and -5 versions, good cockpit, drop tank and decals for multiple aircraft.
AMT-Frog Famous Fighters Series I Hurricane IIC / Fokker DXXI (D-XXI) / Macchi MC-202 Folgore, 1/72, 3955-130
Plastic Model Kit, Box Condition: VG++
$24
From quality Frog molds and contains all three airplane models. This was part of a 1960s AMT marketing idea to sell Frog kit in the USA. Never started and all three kits are still in the internal factory sealed bags and includes decals and instructions.
Fine Molds Me-410A-1 From II./ZG26 Gelb Sieben And FP12 Me-410 A-1 Luftwaffe KG51 Edelweiss - (Me-410), 1/72, FP11-2800
Plastic Model Kit, Box Condition: Exc
$29
SALE!! Includes two kits in the one box shown. Kit #1 is Fine Molds kit number FP11 and is never started and inventoried complete with all parts, including decals and instructions. Kit #2 is FP12 and NOTE: it has minor and 'professional' quality subassembly as follows: two interior panels to right fuselage side; two bulkheads and on shelf panel to the cockpit floor. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. Both models are very well detailed inside and out.
Hasegawa Dewoitine D-520 GC II/3 - French Air Force GC II/3 Or GC III/6 - (D520), 1/72, 00292
Plastic Model Kit, Box Condition: Exc+
$24
2002 limited issue. Nicely detailed and beautifully molded kit with fine recessed panel lines, very good cockpit, enclosed and detailed gear wells, optional tail wheels for different variants and more. Includes paint guide and decals for two different aircraft. Never started and inventoried complete with all parts and includes decals and instructions.
Lindberg Focke Wulf FW-190D-9 - (FW190D9), 1/72, 433-29
Plastic Model Kit, Box Condition: Exc++
$18
One-piece soft box dated 1965. This box is in excellent condition which is most unusual for these thin boxes. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Minicraft 1931 Ford Model A Closed Cab Pickup - (ex Entex / Bandai), 1/16, 1517
Plastic Model Kit, Box Condition: Good
$115
Very large scale (1/16) and highly detailed model from ex-Bandai molds. It features a full rolling chassis build-up just like the real truck, detailed engine, full suspension, complete interior, correctly opening hood, opening doors, optional bed cover, and flexible tarp material that can be displayed down or rolled up (as on the box art). Molded in olive, black, gray, clear, chrome plate, real rubber tires and metal axles. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
ESCI Mercedes Benz 230G Cross Country, 1/24, 3022
Plastic Model Kit, Box Condition: Sealed VG++
$44
Still factory sealed. Nicely detailed kit with full frame assembly with separately molded driveline and suspension, detailed interior, optional position tail gates and more.
AMT Tandem Semi Truck Vans - Two 27 Foot Exterior Post Trailers, 1/25, T521
Plastic Model Kit, Box Condition: Sealed VG+
$62
Still factory sealed and the seal has many splits. This is an early issue from the 1970s and not a recent reissue. The two highly detailed vans feature over 230 parts, vinyl air hose tubing, parts so you can attach the vans to any 1/25 scale semi truck, sliding loading doors, hollow rubber tires, CF decals and more.
AMT Kenworth Conventional W-925 -Tractor Semi Truck, 1/25, AMT1021-06
Plastic Model Kit, Box Condition: Good
$52
2017 reissue from the original molds Super detailed truck with over 300 parts and many in chrome. Features full rolling chassis build up just like the real truck, complete interior cab and sleeper cab detail, one-piece tilting hood, vinyl air/hydraulic hoses, dual exhaust, fifth wheel assembly, hollow vinyl truck tires, straight or curved exhaust stacks, stock or custom rear wheel hubs, "Spicer" main 5 Speed and Auxiliary 4 Speed Transmissions, Air Ride Driver's Seat and 855 CID Turbo Charged Cummings Diesel Engine. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Jetco Piper Super Cruiser PA-12 - 40 Inch Wingspan Scale R/C Or Free Flight Flying Aircraft, S-6
Wood Model Kit, Box Condition: Exc
$145
True scale wooden flying model designed with the original Piper plans; the box top says "Show this authentic three-view to the AMA Contest Judges." Designed for Radio Control but does have provision for free-flight option. Features plastic cowl, die-cut balsa and plywood parts, fully formed light-weight metal main and tail wheel landing gear struts, factory-sealed hardware packet, celluloid die-cut windshield & cabin windows, covering material, very large decal sheet, layout and instructions for R/C installation and building instructions with full size plans. Nothing has been punched out and the model is exactly as it left the factory. Never started. The small parts are still in the factory sealed bag and all else has been inventoried complete including decals and instructions.
Jetco Rearwin Speedster - 38 Inch Wingspan for RC / Control Line / Free Flight, S-4
Wood Model Kit, Box Condition: Good
$145
Very nice kit of the 'superscale' version of Walt Mooney's original magazine plan model. Includes instructions for R/C, CL or free flight and features 242 die-cut balsa and plywood parts, other balsa and hardwood parts and stock as required, pre-cut stringers and spars, pre-shaped leading and trailing edges, hinge material, metal landing gear and pushrods all bent to shape, die-cut clear front windshield and windows, factory-sealed extensive hardware packet, covering material and more. Includes Jetco's superb full size plans and instructions. Never started. The kit is like factory-new inside. The small parts are still factory sealed; the rest have been inventoried complete. Includes decals and all paperwork.
Heller Le Royal Louis - With Sails, 1/200, 910
Plastic Model Kit, Box Condition: Exc+
$74
Large and very well detailed model with over 640 parts. Includes complete deck fittings, cannon & carriages, detailed masts, vac billowing sails, full rigging instructions and more. Never started. Inside, the parts are still in the factory sealed parts bags and instructions.
Heller Le Phenix 1675, 891
Plastic Model Kit, Box Condition: Exc++
$85
From the late 1960s or very early 1970s. Large and highly detailed full-hull kit with 505 parts. Features detailed decks with complete fittings, cannons & ships boats, full standing and running rigging instructions and billowing sails. The kit has never been started. Most parts are still in the internal factory sealed bags; the parts that were not have been inventoried complete and placed in new bags. Includes instructions.
Anigrand Douglas XB-42 Mix-Master, 1/72, AA2031
Resin Model Kit, Box Condition: VG
$58
Very highly detailed, high-definition resin cast model kit. Features very fine recessed panel lines, good cockpit, gear wells and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. Aircraft History and SpecificationIn 1943, the Douglas began a company funded study to a high speed bomber design which was not liked the traditional wing mounting engines. It was an unusual idea to install the two engines within the fuselage, driving a pair of propellers mounted at the tail. That can leaving the wing and fuselage clean and free of aerodynamics-reducing protrusions. Douglas submitted an unsolicited proposal to USAAF, and was awarded a contract for two prototypes. The first prototype first flew in May 1944. Performance was excellent as described in the original proposal. The second prototype joined the flight test program in August, 1944, and was destroyed in crash in December 1945. By the end of war and the jet-powered bomber soon be forthcoming, the Army Air Force had decided that the XB-42 would not be put into the production. The surviving XB-42 was continued for tests and modification until 1948. But what the XB-42 is really famous for is when Douglas proposed to modify the existing XB-42 airframe, then replaced the piston engines with a pair of turbojets for saving time and cost. This became the XB-43 and the first USA built all-jet bomber to fly.