Plastic Model Kit, Box Condition: NM
$26
Superbly molded kit that builds up to a wonderful model. Features all fine recessed panel lines, good cockpit and gear well detail, optional position canopy and pilot boarding stair and a very large variety of weapons. Includes decals for three aircraft. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG++
$265
Very hard-to-find 1967 hardbox gift set. One of Revell's very last in a long line of boxed sets. Includes the large 1/32 scale Spitfire with #610 County of Chester markings and the 1/32 Bf-109F of Werner Molders, Kommodore JG51. The Spitfire features many action features - canopy slides to show fully detailed cockpit, wheels and prop rotate, retractable landing gear, removable cowling shows finely detailed Rolls Royce Merlin engine and more. The Bf-109F features fully detailed engine, removable panels, full cockpit, moving control surfaces, rotating wheels and props and retracting/extending landing gear. The kit has never been started. Inside, both kits are factory new with all parts and paperwork still sealed in the factory bags.
Plastic Model Kit, Box Condition: VG++
$59
Hard-to-find 1975 issue. Features removable cowling panels and detailed Merlin engine, sliding clear canopy to show the detailed cockpit, movable control surfaces and retractable landing gear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Mint
$115
Still factory sealed and in amazing investment-grade 'Mint' condition. The seal is intact. Rare box art version with perfect color and gloss. Hardbox is dated 1960 and it appears that this design was only issued for a few years at the most.
Wood Model Kit, Box Condition: VG
$32
The 'Ace Whitman' name was used by Joe Ott for some of his marketed kits. This model is a solid display model from 1952 and features an 80% precarved fuselage, die cut parts, full size plans and a stapled bag of detail parts (probably wheels). The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Plastic Model Kit, Box Condition: VG++
$275
Rare kit dated 1958. Features a well detailed Thor missile, complete launching tower and ground crew of three. Molded in gloss white and medium gloss gray. Decals and instructions are in amazing 'excellent+' condition. Never started and inventoried 100% complete with all parts, decals and instructions. The box has great color and gloss, four solid corners, no fading, stains or repairs. It would grade higher but it has general wear as shown.
Plastic Model Kit, Box Condition: Good
$24
1979 release and a very nicely molded kit. Features decals for the colorful box photo aircraft, good cockpit and inlet detail, optional position air brakes and air brake well detail, optional position landing gear, retracted or extended ventral rocket tray and drop tanks. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Sealed VG+
$54
Still factory sealed. 1970s large scale issue for rubber or gas free flight, or easily converted to RC using today's tiny and light servos and receivers. Kit features traditional wood/tissue construction, insignia, detailed full size plans, building instructions, wheels, hardware, tissue and propeller. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.
Plastic Model Kit, Box Condition: VG
$295
Very rare. 1960 first issue hardbox with classic artwork; not a reissue. Very highly detailed model of the inside and outside of the 501-D13 that powered the big Convairs and numerous other aircraft. Features a great number of moving parts that duplicate the movement of the actual engine. Molded in correct black, blue, orange and silver plastic. Inside, the kit is exactly as it left the factory and never started. All internal blue display cardboard packing is in 'near mint' condition. All parts and paperwork are still in the clear factory sealed bags. Also includes instructions for motorizing; motor and battery box were not included in this issue.
Plastic Model Kit, Box Condition: Good
$56
Hardbox issue with a copyright date of 1965. The 'Pacific Raiders' issue uses the same molds as the 1954 'S' kit. All three 'Raiders' sported new box artwork and featured in Pacific colors and markings. Also includes turret blocking plate to model Doolittle's Tokyo Raiders. Molded in gloss olive drab and clear. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$29
Hard-to-find He-51 float version with Spanish Civil War decals. This is an older but nicely molded and detailed kit that has markings for both aircraft listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$365
Incredibly rare, 1950s NOS Topping F5D Skylancer model untouched in the original factory box. The buyer will be the first one to ever remove it from the box. Inside, all of the factory cardboard and tissue are still intact. The stand and aircraft were never displayed or used - I believe they were never even removed from the box. While never used, please note that these models never left the factory in 'flawless' condition. There were always minor paint flaws and minor molding flaws as they were mass-produced. Furthermore, the canopy, white plastic and decals inevitably have some yellowing, although this example is minimal. If there is any yellowing or age marks (usually brown mildew on the plastic), you can very easily remove this with Novus #2 Fine Scratch Remover. I have found it perfect for both cleaing and bringing back Topping plastic and decals back to super condition. Because the original Topping box adds significantly to the value, it will be carefully packed into another box for shipping. Shipping insurance is required.
Plastic Model Kit, Box Condition: VG
$26
Most likely from the 1970s and nicely molded and detailed for that time. Features full cockpit, bomb bay load and gunners positions. Includes decals for two aircraft. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: VG+
$79
Very large scale stick and tissue style kit. Features giant 50" wingspan, 7 sheets of printwood, factory-cut stringers and spars, balsa blocks and other wood stock as required, rubber motor, large 9.5" diameter plastic propeller, metal stock, covering material and well detailed, full-size plans. Never started. It has been inventoried complete with all parts.
Plastic Model Kit, Box Condition: Sealed Mint
$115
Still factory sealed and in amazing investment-grade 'Mint' condition. The seal is intact. Second issue dated 1963 that does not have 'Famous Fighters' on the four box side logos. The first issue did have FF in the box side logo borders.
Plastic Model Kit, Box Condition: Sealed
$54
Rare. Still in the factory sealed bag with header. Hard to find kit is also sold as the EMB-110 civil transport. Can be made civil if you supply the decals (FAB markings are provided with full windows and doors). Finely molded with recessed lines and full landing gear.
Plastic Model Kit, Box Condition: Exc++
$169
Dated 1960. The box is in beautiful 'Excellent++' condition. The only flaws are very light wear marks and the scratch in the B-17 at engine #3. Notice the 'Sunburst' logo with no 'Famous Fighters' in the oval, which dates this kit closer to the mid 1960s. Molded in black and clear with the clear triangular 'globe' display stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The decals are in amazing 'near mint' condition with the only flaw being very slight yellowing. The instructions are in 'excellent' condition with typical yellowing and very slight edge wear.
Plastic Model Kit, Box Condition: Exc
$34
Limited run injection molded kit, only 1200 were made. Features recessed panel lines, cast metal details, metal screen and vac canopy. With paint guide and decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: No Box
$49
NOTE: bagged kit. There is no box; the box is shown for reference only. This model is from ex-Allyn Factory Desktop model molds, which were usually factory assembled and painted then given to test pilots, contractors and Navy decision makers. Rare kit showing the original subsonic configuration of the prototype F-102 before the Area Rule 'Coke Bottle' fuselage. With two decal sheets and stand. Aircraft includes clear canopy, decals, in-flight configuration and includes display stand that can display your model in almost any flight attitude desired. The kit has never been started. It has been inventoried and NOTE: missing the two wing boundary layer fences. Very easily made as they are flat, narrow parts; I have included plenty of the correct thickness of sheet plastic so you can made them. Otherwise complete with all other parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good++
$129
Very rare issue dated 1964. This is the seldom seen Aurora reissue of the Comet kit for the Canadian market only. Several small-scale Comet molds were never reissued for the USA market and for decades I have wondered what happened to them. Aurora had no need for them, as they had already cut their own (superior) small-scale molds for most of those subjects, including the B-52 and B-47. Well, the ex-Comet molds went to Aurora Canada! The small, less detailed Comet kits were issued there using the same box art as their slightly larger and more detailed Aurora counterparts in the USA. Simply looking at the box top, you could not tell the difference. However, the four digit part number gives it away as do the contents. Molded in silver and clear and still retains the original Comet 'teardrop' shaped two-piece stand. Naturally the instructions are completely unique since this is a different kit from the Aurora USA B-52. This kit is 100% correct and has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219