Huma Model Henschel Hs-132 Jet Fighter - Bagged, 1/72
Plastic Model Kit
$20
Well molded with recessed panel lines and includes injection molded canopy and decals. Never started and inventoried complete with all parts and includes decals and instructions. Work began on the HS-132 as a jet powered replacement for all the current dive and ground attack bombers which could not function without complete air superiority. Using the experience from the HS123 and 129, Henschel created a simple design where the pilot lay prone to combat "G" forces. The prototype was almost complete when the Russians captured it in 1945.
Huma Model Messerschmitt Me-309 - Me309 V-1 / V-2 / V-3 / V-4 - BAGGED, 1/72, 3501
Plastic Model Kit, Box Condition: No Box
$19
NOTE: bagged kit; there is no box. The box is shown for reference only. Still in the factory sealed parts bag and includes decals and instructions. This model includes optional parts (different vertical & horizontal stabilizers) and decals to build any of the four prototypes. Well molded with all recess panel line detail, 'good' cockpit, pilot figure, injection molded canopy, full landing gear and more. When the Me-209 was dismissed as the 109s successor, design work began on the 309. It was intended to be a high speed, long range heavy attack fighter with an ejection seat and pressurized cockpit. Four were built, but the RLM never assigned any priority to the project. By that time, the jet-powered Me-262 showed more promise and work on the 309 was stopped.
Marivox Saab 17 Dive Bomber - With Wheels / Skis / Floats And Decals For Sweden / Austria / Ethiopian / Danish / Finnish Air Forces, 1/72, 3
Plastic Model Kit, Box Condition: VG
$54
Hard-to-find and still the only injection molded 1/72 scale model of this unique and successful Swedish design. The kit is well molded and features incredibly fine recessed panel lines, optional parts for land, snow and water/float based aircraft, all required parts for the target tug version, very good cockpit and gunner's station, separately molded rudder, elevators & ailerons, choice of engines, cowlings, exhaust & propellers, optional position rear canopy and more. Includes a painting guide and a very large & colorful decal sheet with complete markings for 6 aircraft and the box back and sides includes a full color painting guide for all air forces listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.
MPM Nakajima Kikka Upgraded Kit - BAGGED, 1/72, 72139
Plastic Model Kit, Box Condition: No Box
$27
NOTE: bagged kit; there is no box. The box is shown for reference only. This upgraded version features fine recessed panel lines, many metal PE details, film instruments, a set of high quality resin parts which include cockpit interior, jet engine intakes, exhaust pipes & more, injection molded canopy, fully enclosed gear wells, excellent cockpit and more. Includes a paint guide and decals for two Kikkas - the prototype and Kokutai 724. Never started. The resin and PE parts are still in the internal factory sealed bags; the injection molded parts have been inventoried complete and includes decals and instructions.
Hasegawa Mitsubishi A6M2b Zero Fighter Type 21 Kasumigaura Flying Group, 1/72, AP176
Plastic Model Kit, Box Condition: Exc
$20
Limited edition from 1999 which includes a paint guide and decals for the box art aircraft. Very well detailed featuring complete cockpit, detailed twin-row engine and gear wells, drop tank and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: bulkhead and seat to floor; two engine halves There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Lindberg Arado AR-234B - German Twin Jet Bomber, 1/72, 439-50
Plastic Model Kit, Box Condition: Good
$24
Early hardbox issue dated 1966 with Tom Morgan artwork. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Amodel Martin B-57B/C - USAF - (Canberra), 1/144, 1432
Plastic Model Kit, Box Condition: Exc
$16
Very well molded and detailed. Includes USAF decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Destroyer USS The Sullivans Fletcher Class DD-537 - Pre 'S' Issue, 1/301, H305-129
Plastic Model Kit, Box Condition: NM-
$169
1955 Pre-'S' release in exceptional investment-grade 'Near Mint-' condition. Beautiful boxart has like-new gloss and color, four solid corners, no price tag or tag marks, no fading, tears, creases or missing litho, no tape (other than the factory sealing tape of course) and no repairs. The only flaws are very light, even general wear. Full hull kit with detailed deck, main 5 inch guns, anti-aircraft guns, torpedo tubes and more. It has never been started. Inventoried 100% complete including all parts, decals flag sheet and instructions.
Hasegawa Polikarpov I-16 Type 18, 1/72, AP27
Plastic Model Kit, Box Condition: Sealed Good++
$14
Still factory sealed and there is a small amount of mold inside the seal, so there was once moisture trapped between the cardboard and seal. Very finely molded kit with all fine recessed panel lines, very good cockpit, enclosed and detailed gear wells and more. Never started. It has been invento
Armo 9K72 Elbrus Scud B R-14 Missile With Self-Propelled Tactical Missile Launcher/Transporter, 1/72, 72030
Resin Model Kit, Box Condition: NM
$22
This is a very high quality multi-media model. Features beautiful high-definition resin parts, numerous PE metal details, clear film windows, all parts to build the missile and transporter in 'transport' or 'firing' position, detailed interior, optional position doors and much more.
Aurora Boeing P-26A Peashooter, 1/43, 115-98
Plastic Model Kit, Box Condition: Good-
$42
Early 1954 or '55 first issue with old 'Aurora Line' rectangular logo. This kit was issued shortly after moving to the West Hempstead facility on Long Island. The side logos are the old Brooklyn style but with the new address in the lower bar. Molded in the correct glossy light blue and clear with the early style Aurora rectangular stand, correct Tatem Company decals and the correct instructions. Never started. Inventoried 100% complete with all parts, decals and instructions. The box has wear as shown and also a narrow 1.5 x 1/4 inch factory tape litho pull on the upper long side.
MPM Gloster Meteor FR Mk.9 - RAF 208 Sq At Various Middle East Bases Early 1950s / 208 Sq Malta Operation Musketeer 1956 / C Flight 8 Sq Sharjah During Oman Operations Jan 1958-May 1960 - BAGGED, 1/72, 72534
Plastic Model Kit, Box Condition: No Box
$22
NOTE: bagged kit; there is no box. The box is shown for reference only. Hard-to-find Fighter Reconnaissance version of the venerable Meteor. This high quality, limited production model features all fine, recessed panel lines, recon nose with clear camera panels, very good cockpit, detailed main and nose gear wells, good intake & exhaust, choice of two canopies, drop tanks and more. Includes paint guide and decals for all RAF aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Hasegawa F6F-5E Hellcat Nightfighter - VF(N)-22 / Patexent River Evaluation Aircraft With AN/APS-4 Radar - (F6F5), 1/72, SP113
Plastic Model Kit, Box Condition: Sealed VG
$20
Still factory sealed but the seal has split in the center as shown. Very finely molded and detailed. Includes correct parts for radar and decals for two aircraft.
Lindberg Dornier Do-335 Arrow, 1/72, 438-50
Plastic Model Kit, Box Condition: Good
$18
1966 hardbox issue with Tom Morgan boxart. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
Revell Lockheed SR-71 Blackbird with GTD-21 Drone and Ground Cart - (ex Monogram), 1/72, 85-5810
Plastic Model Kit, Box Condition: Exc
$32
2017 release from quality Monogram molds. Features detailed cockpits, optional position canopies, detailed wheel wells, GTD-21 Drone and ground handling cart. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Ace BREM-2 Recovery Vehicle, 1/72, 72130
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Gunze Sangyo Maserati Merak SS - Motorized, 1/24, G131-600
Plastic Model Kit, Box Condition: Exc
$38
Features all hardware required for motorized drive on the rear wheels, battery storage just forward of parallel to the rear axle, steerable front wheels, complete interior and more. Molded in brown, black, clear and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Requires a common FA-130 motor which was not included.
Aurora Tu-104 Aeroflot - (Civil Tu-16 Badger), 1/130, 127-98
Plastic Model Kit, Box Condition: Good
$65
1959 issue of the military bomber turned civil transport. Molded in the correct gloss gull gray and clear with the clear triangle 'World' stand and Aeroflot decals. Never started. Inventoried 100% complete with all parts, decals and instructions present.
Pyro HMS Victory - The Ship of Admiral Lord Nelson, B369-75
Plastic Model Kit, Box Condition: VG++
$29
Dated 1966 but is probably late 1960s due to the 'soft' style box. Nicely molded small scale ship model that measures about 7 inches long when assembled. Full hull kit includes very nicely molded wood plank and deck detail, very fine copper plates below the waterline, molded-in deck detail with separate cannons, masts and ratlines, display stand and billowing sails. The kit has never been started. It has been inventoried complete with all parts and includes instructions.
Revell 1999 Chevrolet Silverado CK Extended Cab Pickup Truck, 1/25, 85-7646
Plastic Model Kit, Box Condition: VG
$38
1999 issue. Very well detailed with 126 parts. Features detailed engine and engine bay, removable hood, full interior and detailed chassis underside. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals.