Plastic Model Kit, Box Condition: Fair+
$138
Build the ultimate big-scale AH-1W with this MRC model and over $180 worth of aftermarket parts! Includes the following never used and factory sealed or inventoried complete & internally sealed upgrade sets: Eduard BIG3208 AH-1W (includes 32087 Exterior, 32090 Interior, 32091 Armament and JX049 Masking Set), Verlinden 1795 Cockpit Detail Set, AMS Resin 35002 AH-1W FOD Protection Covers, Werners Wings 35-07 AH-1W Turned Exhausts, Werner's Wins 35-12 AH-1W Canopy and Master Model AM-35-001 AH-1W M197 20mm 3 Barelled Rotary Canon. The actual kit is very well detailed and molded with scale rivets, recessed panel lines, extensive cockpit details, detailed engine and gun bay with optional position doors and choice of many weapons configurations. Never started. Many parts are still in the internal factory sealed bags; the ones that are not have been inventoried complete. Includes decals and instructions.
Plastic Model Kit, Box Condition: Good++
$22
1976 issue from quality Airfix molds that includes unique Australian markings. I have also included a set of Heller Spitfire decals with their painting & marking guide, which covers the three aircraft listed above. Never started. It has been inventoried and the actual aircraft is complete with all parts and includes decals and instructions. But NOTE: there are only 4 crew figures. They are MPC, 1/72 and from a WWII aircraft model, but are from another kit.
Plastic Model Kit, Box Condition: VG++
$16
This is the 1983 MPC kit from quality Airfix molds. Features fine raised panel lines, recessed control surface outlines, pilot and ejection seat, two piece canopy, supersonic drop tank, two Atoll air-to-air missiles and more. Includes full North Vietnam markings for the aircraft on the box art. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: No Box
$22
NOTE: bagged kit; there is no box. The box is shown for reference only. Limited issue injection-molded model kit with all fine recessed surface detail and a resin cockpit. There are only two injection molded XP-77s in this scale and this one is the best by far. Never started and the resin parts are still in the factory sealed bag; the pther parts have been inventoried complete and includes decals and instructions. The XP-77 was Bell's response to a possible shortage of light alloys after the war in the Pacific broke out in 1941. The P-77 had an estimated top speed of 410 mph with two 20mm cannons and two .50 caliber machine guns but weighed only 3,700 lbs due to wood construction. Production of 25 aircraft was authorized on May 16, 1942, but lack of superchargers reduced this order to 6. By the time the aircraft flew on April 1, 1944, the shortage of light metals had never been a major issue and other types offered superior performance.
Plastic Model Kit, Box Condition: Exc
$35
Well detailed limited release featuring injection molded parts with all fine recessed panel lines, numerous cast resin and photoetched details, excellent cockpit including all crew stations, full gear well detail and much more. Includes decals and painting guide for all three nations listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG+
$36
This detailed, limited-run injection molded kit featuring optional parts for different aircraft, all fine recessed surface detail, many brass PE parts, resin details, very good cockpit, complete engine, clear windscreens and more. Includes rigging guide & paint guide and decals for all aircraft listed. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. The Koolhoven F.K.51 was the winning design in a 1935 Dutch government contest for a new trainer. The prototype was designed by Frederick Koolhoven and first flew on 25 May 1935. This two-seat, fixed undercarriage aircraft was an equal-span biplane designed to use a variety of engines from 249 to 500 hp. The Royal Netherlands Air Force (LVA) ordered 25 aircraft in 1936 and 1937 that were powered by a 270 hp Armstrong Siddeley Cheetah V radial engine. Another 29 aircraft were ordered with 350 hp Armstrong Siddeley Cheetah IX engine. The Dutch Naval Aviation Service ordered 29 aircraft powered by a 449 hp Pratt & Whitney radial while between 1936 and 1938 the Royal Dutch East Indies Army bought 38 aircraft with 420 hp Wright Whirlwind. The Spanish Republican government ordered 28 F.K.51s, 11 with 400 hp Armstrong Siddeley Jaguar IVa radials and 17 aircraft powered by 449 hp Wright R-975E Whirlwind radials; these were refereed to as F.K.51bis. Production totaled at least 142 aircraft and twenty-four fuselages of the F.K.51 were assembled at Aviolanda. While the majority of F.K.51s were employed as elementary trainers within the Netherlands in the Royal Dutch Flight Schools or in reconnaissance roles by the Royal Netherlands Air Force in the Dutch East Indies, twenty-eight were clandestinely sold to the Republican government during the Spanish Civil War, despite a Dutch embargo on the sale of arms to either side of the conflict. Some of those arriving in Spain were used as light bombers by the Republicans in the Cantabrian region of Spain.[2]Some LVA F.K.51s were briefly used for reconnaissance duties following the German invasion of the Netherlands in May 1940. Several F.K.51s being destroyed on the ground by attacking Luftwaffe aircraft. The Dutch Naval Aviation Service's F.K.51s were used to carry neutrality patrols from January 1940; however most were damaged or destroyed during an attack on De Kooy Airfield on 10 May.When the Japanese invaded in March of 1942, the Royal Dutch East Indies Army had 27 F.K.51s available for service. They saw the war coming and on December 5, 1941, the flying schools were shut down and the F.K.51s were formed into two reconnaissance squadrons based on Java.
Plastic Model Kit, Box Condition: VG+
$34
Well detailed limited release featuring injection molded parts with all fine recessed panel lines, numerous cast resin and photoetched details, excellent resin twin cockpits, fully enclosed and detailed gear wells and much more. Includes decals and painting guide for all three aircraft listed. The kit has never been started. The resin and PE parts are still in the internal factory sealed bag; all other parts are inventoried complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed VG
$78
Still factory sealed. Very rare limited production kit which features excellent injection molded parts with all fine recessed panel lines, many resin details, detailed cockpit & crew stations and more.
Wood Model Kit, Box Condition: VG+
$69
This model is from the mid 1960s and is designed for rubber free flight or control line. Includes an innovative system for 'seeding clouds' in flight. Features quality die-cut balsa sheet parts, strip wood and spars, light plastic full engine cowl, die-cut clear windscreen, fully formed wire landing gear struts, finished wheels, rubber motor and plastic prop, covering tissue, a big sheet of superb, full color decal and full size plans with excellent instructions. The kit has never been started. The small parts are still in the factory sealed wax paper bag, and the parts that were never sealed have been inventoried complete. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits compared to other manufacturers.
Wood Model Kit, Box Condition: Good++
$65
From the early to mid 1960s. This model is designed for either RC, free flight or control line and features an innovative system for automatically dropping twin bombs in flight. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling models to be deluxe kits as they featured color decals, high-grade die cut balsa, vacuform plastic detail parts, plastic wheels (if required), finished wire landing gear, rubber motor and plastic prop, full size plans with instruction details and full instructions for conversion to RC or control line. The kit has never been started. The small parts that were factory sealed are still in the sealed bag. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Wood Model Kit, Box Condition: VG+
$42
Excellent stick-and-tissue flying model that includes both aircraft. Features parts printed on high quality balsa wood, factory cut strip wood & spars, covering tissue, decals, wheels, propellers, fittings, rubber, lightweight plastic parts, step by step instructions and full size plans. There is no assembly but several parts are adult cut (excellent++ quality) from one balsa sheet. The parts that were factory sealed are still in the sealed bag. The parts that were never factory sealed have been inventoried complete including decals and plans/instructions.
Wood Model Kit, Box Condition: Good
$39
From the early to mid 1960s. This is a great action kit actually crop dusts in flight. It features stick-and-tissue construction, precision cut quality balsa wood with die-cut parts, factory-cut spars & stringers, a light-weight plastic full-length engine cowl, die-cut clear windshield & side windows, plastic propeller, fully finished wheels & thrust button, all hardware, fully formed wire landing gear struts, covering tissue, full color decals and Sterling's excellent full size plans with instructions. The kit has never been started. The small parts are still sealed in the small factory bag; all other parts were never sealed and have been inventoried complete & includes all paperwork. NOTE: the decals are 100% intact and flat but they have very, very light stains on the backing paper due to moisture damage. Please see the two articles (on this website) on how to save or reproduce old decals. These decals are perfect candidates.
Wood Model Kit, Box Condition: Sealed Mint
$44
Still factory sealed. This kit contains both aircraft. Features parts printed on high quality balsa wood, factory cut strip wood & spars, colored tissue, decals, wheels, propellers, fittings, rubber, lightweight plastic parts, step by step instructions and full size plans.
Wood Model Kit, Box Condition: Sealed NM++
$44
Still factory sealed and from the late 1960s/early 1970s. These are excellent small scale kits that include both aircraft and features parts printed on high quality balsa wood, factory-cut strip wood & spars, colored tissue, decals, wheels, plastic propellers, fittings, rubber motors, lightweight plastic parts, step by step instructions and full size plans.
Wood Model Kit, Box Condition: VG
$38
From the late 1960s/early 1970s. This kit contains both aircraft and features parts printed on high quality balsa wood, factory-cut strip wood & spars, colored tissue, decals, wheels, propellers, fittings, rubber, lightweight plastic parts, step by step instructions and full size plans. Never started. The small parts are still in the factory sealed clear bag. The parts that were never factory sealed have been inventoried complete and includes decals and plans/instructions.
Plastic Model Kit, Box Condition: VG
$42
Includes a factory sealed Eduard #644104 'Look' Fully Finished Tempest MkII Instrument Panel and PE Seat Belts & Harnesses. The actual model is very well detailed and features main injection molded parts with all recessed panel lines, many fine high-definition resin and photoetched metal details, superb cockpit, optional position canopy, detailed and enclosed gear bays, optional opened or closed engine panel with engine detail, separately molded ailerons, elevators & rudder, drop tanks, rockets and more. Includes full color, multi-view paint guide and decals for 5 different aircraft. Never started and inventoried complete with all parts and includes decals and instructions.
Wood Model Kit, Box Condition: Good
$45
Hard-to-find model that is from the late 1960s or early 70s. It features very easy assembly, die-cut, high quality balsa wood parts, hinge material for the elevator, fully formed wheels, wire stock for the landing gear strut and control line hardware (& pushrod), metal motor mounts, control horn, bellcrank, other hardware and more. The excellent instructions have step-by-step text and are heavily illustrated with general and detail drawings. There is even a section on how to make your first solo flight. The kit has never been assembled but NOTE: there is some 'professional' quality sanding done to the edges of the fuselage and wing. There is no other work done. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+ to Sealed VG
$29
SALE!! Includes all 9 kits. None have been started, but please read carefully for the condition. There are two Wehrmacht Mounted Infantry in the one box. Kit #1 is complete, NOTE: kit #2 is missing one figure, otherwise complete. Japanese Infantry is 100% complete. German Weapons- NOTE: 80% complete. US Weapons includes three trees (1 and 1/2 kits) but NOTE: each one is only 90 to 95% complete. The Soviet Infantry is still factory sealed.
Plastic Model Kit, Box Condition: Good+ to Sealed VG
$29
SALE!! Includes all 6 kits. None have been started, but please read carefully for the condition. There are two Wehrmacht Mounted Infantry in the one box. Kit #1 is complete, NOTE: kit #2 is missing one figure, otherwise complete. Japanese Infantry is 100% complete. German Weapons- NOTE: 80% complete. US Weapons includes three trees (1 and 1/2 kits) but NOTE: each one is only 90 to 95% complete. The Soviet Infantry is still factory sealed.
Plastic Model Kit, Box Condition: VG++
$48
From 2003. This is a very nicely detailed and molded HO scale kit with 87 parts and includes both locomotive and tender. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245