Monogram B-24 Liberator Speedee-Bilt - Five Star Super Deluxe Kit, 1/60, H4-495
Wood Model Kit, Box Condition: Good++
$550
Dated 1954. Rare, desirable and very collectible. Classic early multi-media kit with a fantastic internal box presentation. The box top has excellent color and gloss but general wear as shown, two properly repaired (from the inside) split corners and a closed tear (also repaired) on the lower side. Inside, the kit is factory new. All of the factory cardboard presentation material is present and grades from 'mint' to 'excellent++.' Includes numerous plastic parts in red, gray, clear and black, four unopened glass bottle of Mono*Dope that are still good, an unopened tube of MonoGlue still in the original mint box, all prefabricated wooden parts including the amazing Monofoil wing, three sheets of die-cut and factory painted wood (unpunched), colored die-cut cardstock sheet, sandpaper, gun barrel plastic material, decals in amazing 'near mint' condition, 'near mint' instruction book and full size plans and even a miniature Monogram Catalog showing this kit and the entire Speedee-Bilt line for '54. The kit has never been started. It has been carefully inventoried 100% complete with all parts, paperwork, instructions, plans and decals. Amazingly, the celluloid plastic parts range from no warping to very slight warping (on two of the nacelles). This is very rare, as that type of plastic was unstable and warped easily over time. Before injection molded plastic kits were common, Monogram issued the famous 'Speedee-Bilt' and 'Super Kits' which featured injection molded details and precarved wooden parts. Of these, the Speedee-Bilt B-24 and B-17 were the finest. These kits are very rare today due to their relatively high original price of $4.95. This kit must be shipped insured.
Varney US Navy Fleet Submarine, 1/240
Plastic Model Kit, Box Condition: Exc+
$1100
This model is a landmark in the history of Plastic Kits. The Varney Fleet Sub is the primary candidate for the first all-plastic ship kit made in the USA. The famous HO/O train manufacture, Varney, branched out into other scale model kits at the end of WWII. In late 1945, they introduced what are thought to be the first USA produced plastic model kits - the Fleet Sub and the PT-17 Stearman. Both kits were excellent scale models given the state of modeling at that time. However, Varney was 6 years too early. The Fleet Sub and PT-17 met a cool reception when it was introduced to retailers. Hobby Shops were not sure if it would sell, and did not know how to sell it. Consequently, most retailers would not order it and those who did put them where they were not seen by the public. Distributors stopped carry the kits due to a lack of reporders. The result was inevitable - they did not sell, and Varney pulled both kits from production very quickly. Varney was committed to cutting the molds on the LST and it was released in 1946 with the same result. That marked the end of Varney's venture into non-train scale plastic models. Varney dedicated all production to HO trains and in the late 1940s they sold the molds for the Fleet Sub, the LST and the PT-17 to O-Lin. The molds underwent modification (the hull was divided into two parts instead of one) and were released by O-Lin and Lindberg. This kit is a superb, investment-grade "excellent++" example. The box top has like-new color and gloss, four solid corners with no repairs, no tape or price tags, no marks from tape or tags and no tears or other litho damage. Flaws include very light and even edge wear (as shown), very slight 'dishing' inward and very light foxing on two box sides. Inside, the kit is still as it came from the factory. The yellow parts display is 'very good++' and the only flaw is the scuffing as shown. The small parts bag is still factory sealed and factory stapled to the yellow display. The glass display stand arm is tucked into its holder. The heavy one-piece molded hull is beautiful and in rare crack-free condition and cradled into the holder. The base was factory glued to the yellow display but has come loose. It also includes the unused factory tube of Testors cement in its own holder. Very large instruction sheet is near mint and folds out to illustrate construction and offers numerous display ideas for this new medium in hobby kits. Decals were not provided with the kit. This kit was made with gray injection molded details, glass stand arm and black injection molded stand and sub hull. I have seen versions with no paint on the base and hull; however, this one has the base and hull factory painted gray. The paint is in 'near mint' condition on the hull and 'excellent' on the stand base. A rare example of a classic kit. Shipped with insurance only.
Kemziv Antonov AN-2M - (ex-MEE), 1/50
Plastic Model Kit, Box Condition: Good
$69
Rare and likely from the late 1970s. One of at least two Kemziv issues, and probably the earliest of the two known. Large almost 1/48 scale kit of the popular and successful AN-2, the world's largest single engined biplane. The model has never been started and all parts are still sealed in the factory 'krinkle' clear plastic bags. Includes color insignia sheet and full instructions. The insignia are CCCP and Aeroflot for a civil AN-2 transport. This model is the Ex-MEE 1/50 AN-2 kit that was sold as a built up display model and a kit. Production ended at MEE in about 1984. Some molds passed to Genton at that point, and obviously Kemziv got them at some point. Thanks to Tom Marino for help on this.
Revell F-105B Thunderchief - 'S' Issue, 1/75, H285-89
Plastic Model Kit, Box Condition: Exc
$89
1958 first issue with dramatic hardbox artwork. The box has excellent color and gloss. Features optional position landing gear, movable wheels, four bombs, pilot figure and hinged cockpit canopy and refueling probe. The kit has never been started. Inventoried 100% complete including decals and instructions.
Model Craft Hawker Typhoon, 56 S9
Wood Model Kit, Box Condition: VG+
$22
From the 1940s or very early 1950s. The scale is not given, but the wingspan is 8 inches. This is a higher-quality solid wood scale kit featuring all die-cut balsa parts, bread-and-butter fuselage constructions, die cut wings, printwood tail feathers and other parts, fully finished wheels, clear vacuform canopy (in like-new condition, very highly detailed plans with templates, step-by-step construction and even a painting guide. Never started and complete. The original part number of this kit was 25 S9, but the factory over-stamped it with the number listed.
Airmodel Hughes OH-6 Cayuse and UH-2A Seasprite - Bagged, 1/72, 216
Vacuform Model Kit, Box Condition: VG+
$16
Includes fuselage halves molded in clear for both helicopters. Basic kit only with fuselage. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Airmodel McDonnell F2H-2/2P Banshee - Bagged - (F2H2), 1/72, 198
Vacuform Model Kit, Box Condition: VG+
$12
This kit is often used just for the conversion parts to transform the Airfix / MPC Banshee to the recon-nose variant. Builds either version of the Banshee. Basic vac kit that is nicely molded with recessed panel lines. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners or builder without scratch building experience.
Airmodel Dornier Do-217 K-1 Conversion, 1/72
Plastic Model Kit, Box Condition: VG+
$14
Injection molded conversion has new nose section molded in clear, full instructions and paint guide with listed colors. Never started and complete with all parts and instructions. Conversion kits require a base injection molded kit to complete (the Airfix kit is recommended for this one). Parts included are for the conversion only. Some scratchbuilding may be required.
Airmodel Dornier Do-217 J-1 Conversion - Bagged, 1/72
Multimedia Model Kit, Box Condition: VG+
$8
Includes resin nose and injection molded details. Never started and complete with all parts and instructions. Conversion kit requires base kit to complete (not included, but the Airfix kit is recommended).
Life-Like 1936 Ford Roadster - (ex-Pyro), 1/32, 09288
Plastic Model Kit, Box Condition: Sealed Exc+
$32
Still factory sealed. 1970s Life-Like issue from original 1960s Pyro molds. Features detailed molded chassis underside with separately molded front and rear suspension, complete interior, top boot or top in the 'up' position and rear trunk mounted spare tire. In the early to mid 1960s the Pyro company chose many of its kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Pyro stated that it can be converted to a 'road racing' or slot car.
Airfix Focke-Wulf FW-190D - Craftmaster Issue, 1/72, 1223-50
Plastic Model Kit, Box Condition: Exc
$24
1960s issue in the larger format box with black box sides. The smaller box is kit #6-39. A well-holed and damaged FW makes a hasty power-off landing in this dramatic box art. The emergency vehicles race down the runway ready to douse the flaming engine. The pilot has the canopy open to clear the smoke or to make a hasty exit...or both. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Aurora De Haviland DH-10 Bomber, 1/48, 125-198
Plastic Model Kit, Box Condition: Exc+
$125
Dated 1957 with classic Jo Kotula box art. This is the edition with the '198' price circle in the upper right and no Parent's Magazine approval seal. Box is in 'excellent+' condition with like new color and gloss, four solid corners and no tape or price tags. Flaws include very, very light wear and creasing. Molded in gloss olive drab and clear. Never started. Inventoried 100% complete with all parts, decals and instructions. Even includes the original tissue packing paper.
Yunyj Tyechinik Yakovlev Yak-18 II Light Acrobatic Aircraft - Bagged, 1/40
Plastic Model Kit, Box Condition: Exc+
$18
Classic Cold War kit in large 1/40 scale. Features fine raised panel lines, pilot figure, 'in flight' configuration and decals. Molded in gray, white and clear. The kit has not been started. NOTE: missing prop retainer and display stand. Inventoried with all other parts, decals and instructions. I believe this is a 'Yunyj Tyechinik' release and not the earlier MZMPI. This company succeeded MZMPI (which was the first kit manufacturer in the USSR) and continued till a new name was introduced in the mid 1970s. Yak-18s have been observed in service with the North Korean air force as recently as August 2018.
Aeroclub Mig-17PF Conversion Kit, 1/72
Vacuform Model Kit, Box Condition: Sealed
$16
Still factory sealed. Kit contains full instructions, cast metal nose and tail cone and high quality vacuform fuselage. Requires a base kit, and the Hasegawa 1/72 Mig-17 is recommended.
Aurora Regulus II Guided Missile with Launcher, 1/48, 378-249
Plastic Model Kit, Box Condition: VG
$379
1958 release of this kit featuring classic Jo Kotula boxart. The large 1/48 scale missile comes with a fully operational scale launcher. The hardbox has 'very good' color and gloss, four solid corners, no price tag or tape tears and no torn or missing litho. Flaws include general wear and edge and corner wear as shown. The kit has never been started and is factory new inside right down to the original tissue packing paper. Aurora factory sealed the silver parts and the red missile parts; these are both still sealed. The deep blue parts were not sealed but have been inventoried 100% complete. Includes decals and instructions in 'excellent' condition. This kit must be shipped insured. The Aurora "Missile Line" is legendary. In the late 1950s, the first missile model kits sold briskly, so Aurora and Revell both planned extensive lines. However, the missile modeling craze disappeared as quickly as it started. Models that were in the works were canceled or completed if they were far enough along. Those that were completed were fine efforts but sold poorly and had very short lives, making them rare collector items today.
Merlin Models Kawasaki Ki-32 Mary, 1/72, 3
Plastic Model Kit, Box Condition: VG
$9
Basic injection molded kit with decals and instructions. The kit has never been started. NOTE: missing vacuform clear canopy. Otherwise inventoried with all other parts, instructions and decals.
Merlin Models Fokker E-V / D-VIII - German or Polish Air Force, 1/72, 16
Multimedia Model Kit, Box Condition: Good
$19
Limited edition kit with finely cast metal parts and details and injection molded main airframe parts. Includes decals for multiple versions. The kit has never been started. Internal factory sealed bag including decals and instructions.
NNT SMS A-80 German Torpedo Boat, 1/700, 70002
Resin Model Kit, Box Condition: Exc
$32
Rare. Very highly quality limited issue kit. Features cast resin waterline hull, superstructure and some detail and an Eduard PE fret with railings and numerous other details. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. The 'A' class of German torpedo boats began construction in 1915. Many were built, but A83 through 85 could not be completed at the end of WWI so they were scrapped at Kiel. Many of the A class ended up Polish and Belgian Navies after the war. The balance of the finished ships were scrapped in Britain.
Pegasus Fairey Fulmar Mk.I or Mk.II & Airwaves Detail Set - Fleet Air Arm or USAAF - Bagged, 1/72, 3002
Plastic Model Kit, Box Condition: Exc
$28
Includes factory-sealed Airwaves AC7261 Fairy Fulmar super detail set with brass PE parts. The actual model is the limited edition that builds either variant. Features all injection molded main parts with recessed panel lines, metal details, injection molded clear canopy and decals for either version. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Farpro Seiran Type 11 M6A1 Submarine Floatplane - (ex-Aoshima), 1/72, 105
Plastic Model Kit, Box Condition: Good-
$20
From Aoshima molds. Features working ailerons, crew of two and beaching stand. Molded in medium blue and clear. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Farpro existed for a short time in the late 1960s. All the kits were all made in Japan by Aoshima but specifically for US distribution. Some kits had provision for motorization and some did not.