Academy CVN-69 USS Eisenhower Aircraft Carrier, 1/800, 1440
Plastic Model Kit, Box Condition: Sealed NM
$22
Still factory sealed. Very finely molded and nicely detailed full-and-one-piece hull model featuring full propeller and rudder detail, optional position aircraft elevators, one piece flight deck, detailed island structure and airwing of F-4, A-6, EA-6, F-14, A-7, RA-5C and Hawkeye aircraft & Seaking helicopters. Includes a very large decal sheet with full flight deck markings and even decals for the aircraft.
Ambroid Pennsylvania PRR 100 ton 3 Bay Hopper - HO Craftsman Kit, 1/87, H-9
Wood and Metal Model Kit, Box Condition: Exc
$22
High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.
12 Squared NYC New York Central Container Car With Wood Containers And Metal Sprung Trucks - HO Craftsman Kit, 1/87, 12
Wood and Metal Model Kit, Box Condition: Exc
$38
From about 1965. High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. Includes metal sprung trucks that are factory assembled and an unopened tube of Ambroid Cement. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, extensive decals and full instructions and plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.
Ambroid B & O Baltimore & Ohio Cushion Coil Car - HO Craftsman Kit, 1/87, 7
Wood and Metal Model Kit, Box Condition: Exc
$37
High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. Made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, a sealed bag of detail parts, complete and very colorful B&O decals plus full instructions & plans. The kit has never been started. Internal factory sealed small parts bag and the other parts have been inventoried 100% complete including transfers and instructions. If you have an interest in these highly accurate HO kits and the revolution they created in modeling, please read the article about their history located on this website.
Aeroclub D.H. Vampire T. Mk 11 Trainer - Bagged, 1/72
Plastic Model Kit, Box Condition: Exc
$20
Still factory sealed. Injection molded limited issue that is well molded and includes fine cast metal details and full decals.
Airmodel Dornier Do-17 E / KA / Do-215 Conversions - Bagged, 1/72, 130
Vaccuform Model Kit, Box Condition: Exc
$12
Includes many clear parts with front fuselage section and white parts with three different sets of engine nacelles and two sets of main gear wheels. With instructions. Never started. Complete with all uncut parts and instructions. Conversion kits require a base injection molded kit (not included) to complete. This is a basic conversion only - some scratchbuilding is required.
Hasegawa IJN Light Cruiser Yahagi - Operation Ten-Ichi-Go 1945 - Plus Hasegawa Photoetched Updgrade Sets A and D, 1/350, Z26
Plastic Model Kit, Box Condition: Exc
$179
Includes the excellent aftermarket Hasegawa PE super detail sets "A" and "D". Very finely molded and incredibly well detailed full-hull model with 511 pieces. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Life-Like Long Tom 155mm Gun with Carriage and High Speed Tractor - (ex Adams / Revell), 1/40, 09660
Plastic Model Kit, Box Condition: Good+
$119
From former Adams molds - also from the same molds as the Revell 'S' kit. These models are well detailed for that time. Features detailed carriage and tractor suspension, rotating and elevating 155mm gun that can also can be stored for travel. The tractor includes working bogies, flexible treads and elevating/rotating machine gun. With driver and gun crew. NOTE: this kit has minor and neatly done sub-assembly to two parts as follows: tracks ends are neatly assembled and the tracks painted black. There is no other assembly or painting. Inventoried with all parts and instructions present. NOTE: missing decals.
Life-Like Hawk Missile Battery - With 3 GI Crew (Ex-Adams), 1/40, 09661
Plastic Model Kit, Box Condition: Good
$165
From quality ex-Adams molds and a very highly detailed kit with missiles, radar van, launching pad, tracked loader and crew. It features numerous moving parts and functions. Never started. All parts are still sealed in factory bags. Includes instructions and decals in superb 'near mint' condition.
Life-Like Combat Jeep And Trailer - With 3 GIs - (ex Revell), 1/40, 09652
Plastic Model Kit, Box Condition: Good-
$125
Rare model from the original 1950s Revell "S" Issue molds. Very well detailed featuring rotating wheels, radio, jerry cans, detailed chassis and suspension, tilting windshield, driver/soldier and general figure, detachable trailer with rotating wheels, generator, cable reel, packs, tool box and more. Molded in olive drab plastic and with metal axles. Never started. It has been inventoried complete with all parts and includes decals and instructions. These molds must have had a very interesting history. The molds were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Adams never issued the kit. UPC (Universal Power Master) had use of these molds in the 1960s are perhaps the early 1970s; however, the molds were probably in Japan as most if not all the UPC production occured there. Things get even more interesting with this Life-Like issue, which must have been after the UPC operation ceased operation. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk-purchase of molds that were located overseas. This is simply conjecture, however.
Dragon British Bishop Self-Propelled Gun, 1/35, 9025
Plastic Model Kit, Box Condition: Sealed Exc
$30
Still factory sealed. Very well molded and highly detailed kit.
Anmark Spruce Goose HK-1 Hercules - (ex Entex), 1/200, 8458
Plastic Model Kit, Box Condition: Good+
$34
Very nicely molded and has a wingspan of more than 19 inches. For many decades this was the largest aircraft every built and flown and certainly still the largest wooden aircraft. The HK-1 weighed more than 200 tons and had a wingspan of 320 feet. The aircraft did fly once during a 'taxi-test mission' on November 2, 1947 and is on permanent display now. Never started. The small parts are still in the internal factory sealed bags; the large parts are inventoried complete. Includes decals and instructions.
Hasegawa Aichi E13A1 Jake With Catapult - Type IIB / Type IIB Heavy Cruiser Maya 1942 / Type II 7th Air Corps 1940, 1/72, E9
Plastic Model Kit, Box Condition: Exc
$32
Hard to find model that features a highly detailed catapult, 'good' cockpit and interior with seats and crew, detailed engine with optional opened or closed cowling and more. Includes painting guide and decals for three aircraft. The kit has never been started. Inventoried with all parts and instructions present. Decals are present but NOTE: missing tail numbers for the first aircraft listed (includes them for Maya's aircraft and 7th Air Corps.
AML Lavochkin La-5FN - USSR Lt. YM Lyubenyuk 12 Kills Spring 1945 / USSR Lt. P Rakov Summer 1944 / Czech Air Force 1946 / Luftwaffe Captured LA-5FN Stendal Duben 1945 - (LA-5 FN), 1/72, 72-040
Plastic Model Kit, Box Condition: Exc++
$22
Limited issue kit that cleanly molded, highly detailed and features all recessed surface detail, excellent resin cockpit, many photoetched parts, gear well detail and more. Includes full color paint guide and decals for all of the aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
AML Czechoslovak Legends Pilots In Lavochkin La-5 FN - With Decals For 5 Different Aircraft - (La5FN), 1/72, 72-048
Plastic Model Kit, Box Condition: Exc
$25
Limited issue kit that cleanly molded, highly detailed and features all recessed surface detail, excellent resin cockpit, gear well detail and more. Includes full color paint guide and decals for five aircraft including their victories over Axis aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hobbico Avistar Advanced Trainer ARF - 59 Inch Wingspan Almost Ready To Fly R/C Aircraft, HCAA2016
Multimedia Model Kit, Box Condition: VG+
$149
**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a large, 90% finished RC model of all wood construction that is expertly covered with Top Flite MonoKote and includes Great Planes hardware. This aircraft is truly 'Almost Ready To Fly' and it is just a few short steps of construction to the flight line. Never started. Inside, everything is exactly as it left the factory. The parts are still in the factory sealed bags. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.
Monogram Grumman F3F-3 Fighter - (F3F3) Blue Box Issue, 1/32, PA186-200
Plastic Model Kit, Box Condition: VG+
$95
2nd issue of this kit with the 'Blue Box' dated 1967. Very highly detailed. The kit has many action features: When you pull the prop outward and rotate it CCW, the landing gear retracts. Pull it outward and rotate it CW, and the gear extends. Push the prop in, and it freewheels as normal. Kit features a movable control surfaces, highly detailed cockpit, full decals, sliding canopy and instructions for rigging. Never started. Inventoried and NOTE: missing one tiny, easy to make part: (1) #6. This is a very small round part with a hole in the middle. Otherwise complete with all other parts, decals and instructions present.
Revell Lockheed WV-2 Radome Early Warning Aircraft - Kikoler Issue, 1/128, H174
Plastic Model Kit, Box Condition: Exc
$79
1960s Kikoler Revell of Brazil issue of the famous and rare 1950s 'S' kit. Molded in the correct very dark blue plastic. Never started and inventoried complete with all parts and includes decals and instructions.
Unicraft Arado E.561 - WWII Zerstoerer / Heavy Fighter - (E561), 1/72, 056
Resin Model Kit, Box Condition: Sealed NM
$45
Still factory tape sealed and costs $65 on the Unicraft website. Nicely detailed, limited-run resin kit. Although this heavy fighter design appeared to have two engines mounted in conventional nacelles, this was not the case. The design had the engines mounted in the wing root junction at the fuselage; the propellers were to be driven by shafts. This novel approach allowed the pilot to run both propellers on one engine; but with half the output per side. The configuration also produced a very aerodynamic design which reduced drag.
Tristar German Panzer Kpfw.38(t) Ausf.E/F, 1/35, 35020
Plastic Model Kit, Box Condition: Good
$28
Limited edition, highly detailed kit that also includes brass PE parts. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.