Plastic Model Kit, Box Condition: Exc+
$24
Very nicely molded model featuring fine recessed panel lines, good cockpit and landing gear/well detail, optional position speed brakes, two piece canopy, rocket loadout, and a large and colorful decal sheet for the two aircraft listed. NOTE: this kit has very minor, 'professional' quality subassembly as follows: set and control stock to cockpit floor. There is no other assembly. Inventoried with all parts present and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc+
$28
Still factory sealed. Highly detailed model and perhaps the finest 1/72 F-86D kit ever made. Features all fine recessed panel lines, excellent cockpit and intake/exhaust detail, detailed gear and gear wells, optional position canopy, drop tanks and 2.75 inch FFAR tray that can be displayed retracted or extended. Includes excellent decals for both aircraft listed.
Plastic Model Kit, Box Condition: Exc++
$28
SALE!! Includes two kits in the one box shown. Kit #1 is never started and inventoried complete with all parts, including decals and instructions. NOTE: Kit #2 has very minor and 'professional' quality subassembly to three pieces as follows: seat & control stick to floor. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. Very highly detailed and well molded with very fine recessed panel lines, optional parts for different variants, very good cockpit, pilot figure, optional position canopy, fully enclosed gear wells, bombs or underwing missiles and more. Includes decals for both variations.
Plastic Model Kit, Box Condition: VG
$32
SALE!! Includes two kits in the one box shown. Kit #1 is never started and still in the factory sealed bags; includes decals and instructions. Kit #2 is never started and inventoried complete with all parts, decals and instructions present. Very nice kit from all new molds. Features all recessed panel lines, detailed engine and engine compartment (with firewall, full exhaust, etc.), very good cockpit, three piece optional position canopy, separately molded ailerons & rudder and more.
Multimedia Model Kit, Box Condition: Good
$38
Nicely detailed kit that features fine recessed panel lines, highly detailed cockpit, many resin & photoetched details and more. NOTE: this kit has very minor and 'professional' quality assembly as follows: the PE seat is assembled (1 piece). There is no there is no other assembly. The seat, several other PE parts and three resin parts are airbrush painted. There is no other painting. Inventoried 100% complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$38
On the 4th of October 1957 a specially modified R-7 Missile launched the first man-made satellite named PS-1 or "Sputnik" into orbit. PS-1 (simple satellite number one) broadcast for 92 days on 20.005 and 40.002 Mhz. The kit itself is nicely molded with all fine recessed panel line detail. The kit has never been started. It has been inventoried complete with all parts and includes instructions.
Wood Model Kit, Box Condition: Exc
$48
Very rare and from 1955. This is a very highly prefabricated model. Cavacraft used a generic box (with a SE-5 and DVII) for all of these and the only way to know the contents is by the ink stamp on the side. This box is correct for the DVII. NOTE: build only, please read very carefully for the condition. 1950s wood pre-fab flying model for gas power U-Control. I am almost certain that the box artwork was originally painted by Jim Cox who also did all of the early Aurora box art paintings. Regardless of the manufacturer he was working for, Mr. Cox had a strong tendency to show the D-VII and it's pilot in horrible, certain death situations. Here the Scout pilot pours lead directly into the unfortunate Luftstreitkrafte pilot while his stricken engine spews oil and smoke. Cavacraft pulled out all the stops on this model. When you open the lid, the first thing you see are the factory-built wings installed in the fuselage with the tail feathers in place. It is literally ready to assemble. Everything is sheeted but the wings, for which covering material is provided. All of the main balsa parts are pre-carved and finished, while the flat ones are die-cut. includes a die-cut plywood firewall, fully formed wire landing gear, completely finished wheels, hinge material, covering tissue for the wings and some hardware. This kit has not been started. NOTE: missing the plans/instructions and missing the decals, as well as the screws for mounting the engine of your choice (the engine was not included with the kit). I believe that the model is complete other than those things listed; this collector loved to remove the instructions and decals from his kits for 'safe keeping' but that location was never discovered. Please be aware that this is sold AS-IS as I cannot do a complete inventory as there are no instructions. Although I have not seen them, this box and art were clearly used for more than one kit. The only way to identify what is inside is by the ink stamp on the left and right sides of the box. The kit number "G-3" implies there may have been at least three kits, and one of them may have been a Sopwith Camel. Thanks to Dusty Rhodes, we know that G2 was the British SE-5.
Plastic Model Kit, Box Condition: Sealed Exc+
$42
Still factory sealed. Very finely molded and detailed kit. Features 130 pieces, very fine recessed panel lines, complete and highly detailed interior, open or closed canopy and more. Includes decals for three aircraft.
Plastic Model Kit, Box Condition: Sealed Exc
$28
Still factory sealed and dated 2006. Very finely molded and detailed. Features all fine recessed panel lines, excellent cockpit, detailed gear wells, highly detailed removable jet engine and dolly, pilot figure, optional position canopy and decals for several aircraft.
Plastic Model Kit, Box Condition: Sealed NM
$64
Still factory sealed. 1996 reissue of the original 1959 kit using the same molds and box artwork. Big 1/48 scale kit with excellent detail and one of a very famous series of space kits that Monogram made with the famous scientist and designer Willy Ley. Features four figures and special 'Globe' mounting base. Molded in white and clear.
Plastic Model Kit, Box Condition: Sealed NM
$16
Limited edition injection molded plastic model kit. Pegasus did not include decals with this issue (but did with part #1006). The kit has never been started. Inventoried 100% complete including all parts and instructions.
Plastic Model Kit, Box Condition: Good
$89
Original first issue 'Pre-S' kit from 1954 and before the 'S' Cement logo was used. The box has classic 'Flying Dragon' Richard Kishady artwork. Features rotating turrets and propellers, pilot, copilot and bomber figures and "The Flying Dragon" decals. Correctly molded in gloss olive drab and clear and includes the famous Revell Swivel 'Globe' base. Never started and 100% complete with all parts, decals and instructions present. NOTE: one part, the very small nose door, is a slightly different color plastic.
Plastic Model Kit, Box Condition: Good++
$225
Very Rare. This is one of the first three aircraft models issued by Revell back in 1953. This kit is correct with no rivets and no landing gear as well as the unique stand that was only issued with these three kits (and their gift set). This box is in unusually good condition, complete with all end flaps and has not been crushed - usually these thin one-piece boxes are in very bad condition. The box has never been repaired. Flaws include the marker writing on the top, the same size marker with 'K219' on the left short end panel, and very light general wear. Never started. Inventoried 100% complete with all parts, decals and instructions present. Instructions are printed on the back of the box. It is very interesting to note that this kit is different from the 'Pre-S' issue in the following ways: no rivet detail, almost no panel lines, different part numbers, pilots are a part of the fuselage (busts only), one piece wings and absence of the pods at the half-wingspan line, no landing gear and no holes for such, very early 'Colortone' logo decals and a silver, two piece plastic stand of a unique design that was never used again.
Wood Model Kit, Box Condition: VG
$159
Rare. This versatile design features 815 sq.in. wing area, weighs 3 to 3.5 pounds built and is designed for four cycle (.40 to .53) or two cycle (.25 to .40) sized engines. Features precision machine cut parts, dual strut landing gear, filament wound composition tail boom and much more. The kit has never been started. Inside, it is exactly as it left the factory with the parts still in the original rubber bands. Inventoried complete and includes all paperwork/plans. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Wood and Plastic Model Kit, Box Condition: Sealed VG
$120
Still factory sealed. NOTE: this kit comes in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Plastic Model Kit, Box Condition: VG
$28
From very high quality ex-Heller kits. Cleanly molded with no flash. Soviet Union release. Full hull kit with excellent detail. The kit has never been started. NOTE: missing part #22, a bridge piece that is solid, smooth, about .5 inches high and 1.3 cm high and shaped like half of an ellipse. This part can be made by a skilled modeler. Otherwise inventoried with all other parts and instructions.
Plastic Model Kit, Box Condition: Sealed VG+
$48
Still factory sealed. 1967 Chrome plated version with John Andrews box artwork. This model is still the only 1/48 injection molded kit of the short-wing 'A' Variant. It features gun packs, AIM-9 Sidewinder missiles, bomb load, good cockpit, optional position canopy and more.
Plastic Model Kit, Box Condition: Good
$32
Very highly detailed model that is superbly molded with all very fine recessed panel lines. Features parts for either version (including detailed cameras for the B-2b), highly detailed cockpit, detailed gear wells, photoetched parts and bomb load for B-2 variants. Has decals for the three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$52
1995 reissue of this great kit that uses the original 1958 molds. Truck features detailed engine, tilting cab, full chassis and interior, while the trailer includes piping detail, spare tire, ladder and opening valve compartment doors. There is also a Champion curb sign with decals and crew of two as shown on the cover artwork. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$24
Still factory sealed and the only 1/72 scale injection-molded model of this aircraft.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240