Hobby Craft Vampire F3 Jet Fighter - Mexican or RCAF Canadian Air Forces, 1/48, HC1549
Plastic Model Kit, Box Condition: Sealed Exc+
$28
Still factory sealed. Features all recessed panel line details, cockpit detail and drop tanks as well as markings for the both countries listed.
Hobby Craft Convair B-36B Peacemaker - USAF Arctic Red Color Scheme, 1/144, HC1271
Plastic Model Kit, Box Condition: Exc
$30
This well molded kit features all recessed panel lines, some cockpit detail, full landing gear, separately molded rudder, rotating propellers and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Lindberg US Strategic Strafer P-47 Thunderbolt, 1/72, 416-29
Plastic Model Kit, Box Condition: VG
$28
Still factory sealed. Hard-to-find first issue from the mid 1950s with the clear panel on the box top and a 29 cent price extension. Includes a color trading card & instructions on the back of the box and colorful decals for the box art aircraft.
Lindberg Stearman PT-17 Kaydet Motorized, 1/48, 508M-100
Plastic Model Kit, Box Condition: Good++
$36
With motorized prop action. Hardbox issue dated 1966 with Tom Morgan boxart. The Stearman was the last standard biplane produced for the Army and Naval Air Forces. Production was over 10,000 planes, making if more prolific than any other US Biplane design. Kaydets help to train over 60,000 allied airmen in WWII. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Lindberg Messerschmitt Me-262, 1/48, 538-98
Plastic Model Kit, Box Condition: VG++
$36
1950s hardbox issue with dramatic Gaekdke artwork. Loaded with working features including jet engines with removable panels, retractable landing gear with working gear doors, working ailerons & rudder, detailed gun bay with opening covers, detailed main gear wells, pilot & mechanic figures, bomb load, hinged pilots canopy and more. Includes the famous Lindberg clear display stand as well. Never started and inventoried complete with all parts and includes decals and instructions. Please NOTE that the kit display better than the 'very good++' rating but is graded as such because on the left short side there is a small price tag tear, about 1/2 the size of a standard price tag.
Lindberg Laird Turner Meteor - Thompson Trophy Air Racer Roscoe Turner, 1/32, 70562
Plastic Model Kit, Box Condition: Sealed NM
$24
Still factory sealed. 1992 issue of the 1/32 Pyro kit. Well molded for that time and features good cockpit detail, moving control surfaces, pilot figure, clear canopy and more.
Lindberg Republic P-47N Thunderbolt, 1/48, 511-98
Plastic Model Kit, Box Condition: NM
$65
Early hardbox issue from the late 1950s with colorful Ray Gaedke hardbox artwork. The box is in amazing investment grade 'near mint' condition with like-new color and gloss, four solid corners, no repairs, fading, creases or stains. Light general wear and tape marks on the two longs sides are the only flaw. This is the second issue of this kit for the USA, with added fine rivet detail and molded in silver and clear. Never started. Inventoried 100% complete with all parts decals and instructions. This kit started as a basic 1/48 scale model with full landing gear, rockets and bombs. Surface detail was minimal Lindberg modified it in the mid 1950s with fine raised panel lines and tasteful rivet detail. In the late 1950s, they modified it again to a motorized version with the batteries in the stand and a kit electric motor in the nose. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.
MPC Space 1999 Eagle 1 Transporter, 1-1901
Plastic Model Kit, Box Condition: Good
$30
1975 original issue and not the common reissue. This model was released as a tie-in to the popular science fiction TV show starring Martin Landau and Barbara Bain. Measures 12 inches long when assembled and includes detachable cargo hold. The kit has never been started. It has been inventoried and NOTE: missing one part, #5 - a clip that holds the cargo compartment to the Eagle. Otherwise includes all other parts, decals and instructions.
Revell B-24 Liberator Giant Bomber Buffalo Bill - Pre 'S' Issue, 1/92, H218-98
Plastic Model Kit, Box Condition: VG+
$125
Second issue dated 1954 with hardbox Pre-S artwork of 'Buffalo Bill' by Richard Kishady. Molded in the correct high-gloss medium olive drab and clear plastic with the clear Revell 'World' Swivel Stand display base. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Aurora Convair F-102 Dart - (YF-102 Delta Dagger), 1/121, 290-39
Plastic Model Kit, Box Condition: VG+
$40
Hardbox issue dated 1957, but from the mid 1960s due to the oval logo with the blue outline. Small scale kit with dramatic Jo Kotula box artwork is nicely molded with clear canopy, full landing gear and display stand. This is a model of the very early YF-102 prototype with the straight (non-area rule) fuselage. The kit has never been started. Inventoried 100% complete including decals and instructions. Around this time, Aurora issued a series of inexpensive (usually 29 cent) small scale kits that were designed to sell at almost any type of retail location. The line was successful and further expanded - when Aurora purchased the Comet molds, they fit in nicely with this established line.
Addar 2 in 1 F-94C Starfire F-100 Super Sabre - (ex Aurora / Comet), 902
Plastic Model Kit, Box Condition: Exc+
$36
From ex-Comet (and ex-Aurora) molds. Addar was an attempt by ex-Aurora employees to carry on the name when Aurora went under. The F-94C is 1/91 scale and the F-100 is 1/103. The kits have never been started. Inventoried 100% complete including decals and instructions.
Wingnut Wings Hannover C1-II - (C1II), 1/32, 32024
Plastic Model Kit, Box Condition: Exc
$225
Out of production. This is an amazingly well detailed injection molded model with a fret of PE details and a wide variety of decal choices. Never started. All parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Douglas X-3 Stiletto High Speed Research Aircraft - With Ground Tug, 1/65, H259-89
Plastic Model Kit, Box Condition: Exc++
$54
This is the 1994 reissue of the classic 1955-1959 'S' issue. The original box art was retained for the reissue and it has features the X-3 aircraft, tow truck, tow bar, driver and the famous special clear Revell Swivel Base Display Stand. All of these items only came with the original "S" issue and this reissue. Never started and inventoried complete with all parts and includes decals and instructions.
Revell German V-2 Missile - With Trailer And Launcher - History Makers Issue, 1/54, 8601
Plastic Model Kit, Box Condition: Good+
$62
1982 release. Re-release of the popular early 1960s kit. Has many operational features. Missile has removable panel with full interior featuring fuel tanks, rocket engine and more. Includes launcher and transport trailer/erector. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Bell X-5 History Makers Issue, 1/40, 8619
Plastic Model Kit, Box Condition: Good+
$32
The X-5 was the first aircraft to change the angle of wing sweepback in flight, and paved the way for the legendary F-111 and F-14. Many action features. Variable sweep wings move, landing gear retracts, detailed jet engine and movable control surfaces. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram T-28D Fighter Bomber - USAF COIN or South Vietnamese Air Force 516th Fighter Squadron, 1/48, PA121-100
Plastic Model Kit, Box Condition: NM-
$75
Fantastic condition Four Star kit that is from 1965. The T-28D features a very good cockpit, rear canopy that opens and closes, retractable landing gear, wing mounted machine gun packs, napalm canisters and iron bombs, rotating propeller & wheels, instructor, student pilot & mechanic figures. Includes a large decal sheet with stencils and markings for both aircraft. Never started and inventoried complete with all parts and includes decals and instructions. The box displays better than the 'Near Mint-' grade but it is rated as such because there is very light clear tape residue on both long sides.
Merlin Models Lockheed Orion UC-85 - USAAF or Varney Speedlines Airline, 1/72, 21
Plastic Model Kit, Box Condition: VG
$44
Hard-to-find model of a rare subject Injection molded kit with fine, recessed panel lines with many cast metal detail parts. Fuselage is molded in clear plastic; includes interior detail. Includes full decals for Military or Civil version. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Merlin Models Breguet 14 B2 - (Br-14), 1/72, 6
Plastic Model Kit, Box Condition: VG
$24
Limited issue injection molded kit. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Lindberg Heinkel He-162 Jet Fighter, 1/72, 432-29
Plastic Model Kit, Box Condition: Fair++
$16
One-piece soft box issue that is dated 1965. Never started. Inventoried 100% complete with all parts, decals and instructions present.
Lindberg Dornier Do-335 Arrow, 1/72, 438-50
Plastic Model Kit, Box Condition: Good
$19
1966 hardbox issue with Tom Morgan boxart. Never started. Inventoried 100% complete with all parts, decals and instructions. Lindberg is a company with a fascinating history The original 'Lindberg Line' stretches back to the 1930s when Paul Lindberg drew plans for famous modeling magazines and marketed his balsa wood 'stick and tissue' by urging dealers to carry the '...Complete Lindberg Line'. After the war, Lindberg and Olsen had a strong hand in early United States injection molded kit development. Please see the article located on this website about early USA plastic kit manufacturers.