Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airframe Arado Ar-231 - Bagged, 1/72

Vacuform Model Kit

$9   

Still factory sealed. The Arado 231 was designed as a small submarine borne spotter aircraft and was first flown in 1941. It could be dismantled in six minutes and stored in a tube with a diameter of 6.56 feet. The aircraft was not considered successful and only six machines were completed. Basic vacuform kit; not recommended for modelers who have not built vac kits. Scratch building experience and a large spares box is necessary.

Monogram Convair B-58 Hustler - White Box Issue, 1/121, 6821

Plastic Model Kit,   Box Condition: Sealed Mint

$40   

1973 'White Box' issue is still factory sealed. Has many action features - remote trigger drops weapons pod and all three cockpit hatches open. Includes two scale ground crew and gas turbine truck. This is a reissue of the classic Four Star kit.

Revell Lockheed C-130B Hercules Air Commando Issue, 1/140, H230-100

Plastic Model Kit,   Box Condition: VG+

$52   

1966 hardbox issue. Inside, this kit is the original 'S' kit C-130 minus the ground equipment and stand. Features opening/closing loading ramps in back with spinning props and wheels. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box displays better than the 'very good+' grade but is graded as such because there are short pieces of packing tape (.3" x .7") on the two short sides.

Arii Japanese Navy Type 93 Advanced Trainer K5Y1 'Willow' - Markings for One Orange and One Silver Aircraft, 1/48, A338-600

Plastic Model Kit,   Box Condition: Exc+

$28   

Appears to be from Otaki molds. Very nicely molded kit featuring very good cockpit and engine detail, pilots, decals for two colorful aircraft, full color painting guide and rigging wires and rigging information. There is also a beautiful full color painting guide showing both aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Fokker DR-1 Triplane - Manfred von Richthofen 'The Red Baron', 1/28, 4744

Plastic Model Kit,   Box Condition: VG

$36   

1992 reissue of the 1957 'S' kit. Large scale (1/28) detailed kit with movable prop and wheels, detailed engine, cockpit, full rigging instructions and more. Includes special markings for the Red Baron's DR-1. The airplane has never been started but NOTE: the two halves of the Baron have been neatly assembled. Inventoried with all aircraft parts present but NOTE: missing two ground mechanic figures. With decal and instructions.

KP Letov S.328 Floatplane (S-328), 1/72

Plastic Model Kit,   Box Condition: Exc

$14   

Very attractive 1930's float plane. Contains markings for Czech Air Force and Navy. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

RCM North American X-15, 1/48

Vacuform Model Kit,   Box Condition: Bagged

$52   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Airmodel XF5U-1 Flying Pancake/Flapjack - Bagged - (XF5U1), 1/72, 138

Vacuform Model Kit,   Box Condition: Bagged

$20   

Very nicely molded with all fine recessed panel lines. Basic vac kit with main airframe parts. Never started. NOTE: missing clear canopy. includes all other parts and instructions/plans. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Heller Kurun 'Round the World' Norwegian Cutter, 1/60, 80614

Plastic Model Kit,   Box Condition: Good

$36   

Very nicely detailed large-scale full-hull kit with billowing sails. Features detailed deck with full fittings, rigging instructions and display stand. All parts are still factory sealed. With instructions, vac sails and decals. The Kurun was the result of the dream of a lover of the sea, Jacques-Yves le Tourmelin. As a young child, he had sworn to go around the world solo under sail. Jacques began construction of the Kurun immediately after World War II. In spite of the scarcity of raw materials, the ship was floated and ready for it's first trials on February 26, 1948. He set the sails for his epic journey on September 19, 1948 at 4 pm. On July 7, 1952, after 45 months sailing, the battle-scared Kurun arrived at the harbor of Le Croisic after circumnavigating the globe.

Airfix Gloster Meteor III, 1/72, 02038-1

Plastic Model Kit,   Box Condition: VG+

$18   

Fourth logo type from 1978. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

California Model Co Featherette Microfilm Indoor Airplane - 18 inch Wingspan Airplane for Class B Competition

Wood Model Kit,   Box Condition: Exc+++

$65   

Probably from the 1940s. Stick and tissue flying model kit to a constant 1/16 scale with very nice quality. Made by California Model Company out of Long Beach, CA USA. If you have more information on this manufacture, please email me. Kit uses rubber for power. Features required wooden parts, instructions and full size plans. The model has not been started. Inventoried 100% complete with all parts and instructions.

Merlin Models Hawker Hind Frog Penguin Replica, 1/72

Plastic Model Kit,   Box Condition: VG++

$34   

Very limited edition replica of the Frog Penguin kit. Includes photocopied original instructions. The kit has never been started. The factory parts bag is still sealed and also contains all paperwork and decals. In the late 1930s, before WWII, Frog created the world's first line of injection molded plastic model kits. Since Frog stood for 'Flies Right Off the Ground' and Frog had a famous line of flying models, the world's first all injection molded kits were called Frog Penguin for the bird that does not fly. The Penguin Osprey was among the early pre-war releases by Frog. The kit is reproduced from actual Frog Penguin kits belonging to the extensive collection of the owner of Merlin Models.

Kibri Half-Timbered Brick House 'Niederelbe' - HO, 1/87, 8244

Plastic Model Kit,   Box Condition: Exc

$29   

Very nicely molded and detailed HO structure. Includes factory painted timber overlays, base, clear windows and a wide variety of printed in-scale curtains and window treatments. The kit has never been started. Inventoried 100% complete including printed designs and instructions.

AMT 1996 Ford Explorer 4x4, 1/125, 8968

Plastic Model Kit,   Box Condition: Sealed NM

$18   

Still factory sealed.

Siedlce Mucha Standard Glider, 1/72

Plastic Model Kit,   Box Condition: VG

$19   

Siedlce often printed PZW on their boxes. These kits and PZWPT and are all from this Polish manufacturer. They are no longer in operation. Cleanly molded and nicely detail kit with cockpit detail, clear canopy, display stand and decals. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

R&L The Mayflower - Pilgrims Ship from 1620 - Bagged, 1/720

Plastic Model Kit,   Box Condition: No Box

$10   

Still factory sealed. Very well detailed and molded. Full hull kit includes sails and is approximately 2.75 inches long when built. Small scale model from R&L in Australia. R&L marketed these kits independently but some were also sold by Minicraft/Hasegawa, Academy, as the Aurora 'Snaparoos' and in Kellogg's Cereal as premiums.

Monogram Flying Sub from Seaview Voyage to the Bottom of the Sea, 1/60, 6011

Plastic Model Kit,   Box Condition: VG++

$85   

1995 reissue from ex-Aurora molds. Very nice, larger scale kit molded in yellow, gray and clear plastic. Features detailed interior, operating pick up hood and a crew of two. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Renwal USS King Destroyer Leader DDG10, 1/500, 85-0603

Plastic Model Kit,   Box Condition: Sealed NM

$45   

Still factory sealed. This is the modern reissue and not the 1950s issue. Well detailed model of the 512 foot-long large destroyer designed for anti-air and ASW duties.

Blue Water Navy Russian Kilo Class Attack Submarine, 1/350, BN35047

Resin Model Kit,   Box Condition: Fair

$24   

Rare. Very high quality resin full hull model kit with cast metal parts and PE details. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

CM HMCS Sackville (Short forecastle Flower Class), 1/350

Resin Model Kit,   Box Condition: Fair

$75   

SPECIAL ORDER limited production kit. Museum quality high definition resin castings. Complete kit with all parts needed for assembly. Some kits include photo-etched details and decals if required -email for details on a certain kit. Kits are molded upon receipt of payment. Normal wait is six to eight weeks.