Revell Fokker DR-1 Triplane - With Large DR-1 Iron-On T-Shirt Design, 1/28, 4417
Plastic Model Kit, Box Condition: Good++
Sold
1981 issue. Amazingly, it still contains the large format (7"x5") T-Shirt Iron-On of a very colorful DR-1 with a Revell Logo. I have had many of these kits, but this is only the second one that still had the Iron-On. Large and highly detailed model features pilot and two ground crew, full cockpit, engine detail, rigging instructions and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Pit Road TWO SAC Set 2 Strategic Air Command B-52G Stratofortress and B-1B Bone With Ground Equipment, 1/700, S-3
Plastic Model Kit, Box Condition: VG++
Sold
SALE!! Includes two full kits in the one box shown. Very well detailed and molded. Includes two B-52s, four B-1Bs (two with wings swept and 2 extended), lift trucks, tractors, flight crew vehicle and very extensive decals. Never started. One kit is still in the internal factory sealed bags and includes decals and instructions. The other one is also not started and has been inventoried 100% complete with all parts, decals and instructions.
Sweet GM FM-2 Wildcat - TWO Models - (F4F), 1/144, 14103
Plastic Model Kit, Box Condition: Exc+
Sold
Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale. This kit features two complete models of the Wildcat with super-fine recessed surface detail, very good engine, dual drop tanks, fully detailed landing gear and more. Even includes wheel chocks. The large and extensive decal sheet has markings for 5 different aircraft and there is also a full color painting guide. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Hobby Craft Vampire FB5 / FB6 - RAF No. 112 Sq 1951 / Swiss / Venezuela - (DH-100), 1/48, HC1574
Plastic Model Kit, Box Condition: VG
Sold
Features all recessed panel line details, cockpit detail and drop tanks as well as markings for the four countries listed. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Huma Model Me 328A And Me 328B, 1/72, 3504
Plastic Model Kit, Box Condition: Good++
Sold
This model includes both aircraft with fine recessed panel lines, very good cockpit detail, wing-mounted pulse jets, bob load and more. The parts are all injection molded including the clear canopies. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Ace Model Shop Midget Racer, 1/16, 6-R
Multimedia Model Kit, Box Condition: Good
Sold
Dated 1946. This well designed kit is primarily wood with plastic wheels and tires and with some metal details and other metal parts. Features main balsa wood parts cut to profile (cut in two dimensions), other wooden parts cut to size, balsa and hardwood stock, metal and brass stock and more. There are four excellent plastic one-piece wheels with tread and a small clear wax paper sack with some small metal parts inside. There are excellent instructions with detailed building text, full size three view drawings, photos of the assembly process and a very nice photo of the built model. Never started. The kit has been inventoried with all parts present, and the small parts bag is still factory sealed. Includes decals and instructions. The famous modeler Gordon A. Babb founded Ace in 1942. Mr. Babb was born in 1897 and became a well-known builder and competitor in the model field with aircraft and cars. National 'how to' hobby magazines often carried details articles about how to build his designs. In his first year in business, he sold 1,800 jeep kits. By 1952 the line had greatly expanded the line to hot rods, T-rods, midgets, roadsters and much more and he was expecting to sell 600,000 model kits. Mr. Babs was famous for inventing the first gas-powered midget racer model which sparked a nation-wide building spree and speed competition. His 'Ace Model Shop' was in Pasadena, California and the mailing address was 60 N. San Gabriel Blvd. Later the address was simply Ace Products, Pasadena 8, California. Most solid 'display' kit producers in the 1940s simply provided plans and blocks of wood, maybe with a few accessories. Ace went well beyond that with all cut-out parts, fully formed wheels and even some metal parts, occasionally small plastic details and sometimes even decals. The plans went well beyond the average also, featuring numerous views (not just three), detail views for sub-assemblies and even text instructions. There were at least 15 car kits in the line and also many military vehicles which were popular kits in World War 2. We don't know what happened to Ace 'Models Of Merit' but the introduction of plastic kits (started by the Highway Pioneers) put an end to most wood kit production.
Aeroplast August-Bell 212 / Bell 205 / UH1N / Astrokit August Bell AB-212 ASW - ECM, 1/72
Plastic Model Kit, Box Condition: VG to Exc
Sold
SALE!! Includes all three model kits. The Astrokit Bell 212 ASW/ECM has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The two Aeroplast kits have never been started. They have been inventoried complete with all parts and includes decals and instructions.
Hasegawa General Dynamics F-16A Plus Fighting Falcon - USAF 50th TFW Hahn Airbase West Germany 'Gun Smoke' 1983 / 8th TFW 'Wolf Pack' Kunsan AFB Korea / Royal Netherland Air Force 311 Sq Volkel AFB Holland, 1/72, 601
Plastic Model Kit, Box Condition: Good
Sold
Superbly molded and builds up to a great model. Features all fine recessed panel lines, good cockpit and gear well detail, optional position canopy and pilot boarding stair and a very large variety of weapons. Includes decals for all three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya Masterwork Collection German Pz.Kpfw.IV Ausf.H Early Version - Professionally Built And Painted Model Kit, 1/35, 21008
Plastic Model Kit, Box Condition: Good
Sold
Very rare and part of a professionally assembled and painted series of tank models from Tamiya. The quality of the work is amazing in all respects and the it also features cast metal track links and turned metal gun barrel. The model is in mint condition and has never been removed from the factory packaging.
Life-Like M20 Armored Car with 6 G.I.s - (ex Revell / Adams), 1/40, 09651
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
From Ex-Revell/Adams molds. Nicely detailed kit with full suspension, interior detail, rolling wheels and movable machine gun. This kit has a fascinating history. Adams originally cut the molds, but discontinued all model production before issuing it. Revell ended up with the molds for this and many other Adams AFV kits and issued this one in 1956. However, SNAP issued this model in the late 1950s/early 1960s. Eventually Life-Like ended up with them, but in between it was announced or issued by several other companies. Lindberg was the last known owner, so perhaps Round 2 now has them.
Life-Like Choo Choo Baby 155mm M40 Self Propelled Gun - With 4 GIs (ex Adams), 1/40, H659-300
Plastic Model Kit, Box Condition: Good
Sold
From quality Adams molds. Very highly detailed down to the interior and features many moving parts typical of the Adams Action Models. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Wrather Port Properties Spruce Goose HK-1 Hercules - (ex Entex Gakken), 1/200, 01-000-001
Plastic Model Kit, Box Condition: Good-
Sold
This high quality model is from the original Gakken molds, is very nicely molded and has a wingspan of more than 19 inches. For many decades this was the largest aircraft every built and flown and certainly still the largest wooden aircraft. The HK-1 weighed more than 200 tons and had a wingspan of 320 feet. The aircraft did fly once during a 'taxi-test mission' on November 2, 1947 and is on permanent display now. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Pegaso Monocoupe 90-A - With Air Race Diorama, 1/48, P2060
Plastic Model Kit, Box Condition: Exc
Sold
This is the Necomisa/Pegaso reissue of the 1950s Lindberg 1/48 scale kit from original molds. It is still the only 1/48 scale Monocoupe kit ever injection molded. Includes cardstock Air Race Diorama with base, grandstand and pylon. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Academy Boeing B-17C Flying Fortress, 1/72, 1666
Plastic Model Kit, Box Condition: Good-
Sold
From 1989. Beautiful and highly detailed model of the early Fortress. Features all fine recessed panel lines, excellent cockpit detail, optional position landing gear, rotating propeller and wheels, bomb bay detail with full bomb load & optional position doors and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Skywave DDG21 USS Cochrane or Germany Leutjens Class Missile Destroyer - Charles F. Adams Class - With Decals For DDG10 Through DDG24 And Luetjens / Moelder / Rommel, 1/700, M-8
Plastic Model Kit, Box Condition: Good+
Sold
Very nicely detailed and molded kit includes decals (ships numbers and name) for any of the US Navy ships listed and the three German Navy destroyers. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Scale Flight Comet Spartan Biplane - 16 Inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Most kit contents consist of contest grade printwood, contest quality strip wood, machine cut balsa propeller, Japanese tissue, fully formed wheels, nose bearing/plug, prop shaft/freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Scale Flight Comet Curtiss Airmail Biplane - 16 Inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Most kit contents consist of contest grade printwood, contest quality strip wood, machine cut balsa propeller, Japanese tissue, fully formed wheels, nose bearing/plug, prop shaft/freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Golden Age Reproductions KawasakiKi-61 Hein Tony - 24 Inch Wingspan Balsa Flying Airplane Model
Wood Model Kit, Box Condition: Exc
Sold
Original plans and kit from Golden Age. Very high quality stick and tissue model with contest-quality balsa printwood, color decals, vacuform wheels, spinner and cooler intake, hardware & metal stock, strip wood & spars and full size plans. Never started. It has been inventoried and NOTE: missing canopy and plastic propeller. Includes all other parts listed and all paperwork.
Cadet Stratobomber Balsa Glider, G-11
Wood Model Kit, Box Condition: VG
Sold
Rare kit from the 1940s in fine, never used condition. This is an easy to assemble glider featuring factory painted and decorated parts. The solid fuselage is red and has the profile outline of an advanced pre WWII bomber. The wing is die cut and decorated with four printed engine nacelles and "STRATOBOMBER" across the top. The horizontal and vertical stabs are die cut and even the original nose weight is included. The instructions are on the back of the box. It has never been built and is complete. Cadet Aeronautics was a division of Winner Engineering Corporation, Trenton NJ. This line consisted of a P-40, P-51, Spitfire, Hellcat, P-47, Airacobra, Culver Model V, Aeronca Champion and Stinson Voyager 150 (numbered B-1 through B-9 respectively). Cadet also had a very popular line of ready-to-fly gliders such as the 'Stratobomber' and many others.
Hobby-Time Northrop Scorpion F-89 Prototype - Solid Wood Model Airplane, 1/72, 283
Wood Model Kit, Box Condition: Good
Sold
1950s prefabricated solid wood model that features a vacuform clear canopy, plastic wheels, fuselage 3D cut to about 80%, die-cut balsa parts, color decals, plastic display stand, sandpaper and full sized plans. Never started. It has been inventoried complete with all parts and includes decals and instructions.