Plastic Model Kit, Box Condition: VG+
$42
Nice kit with over 115 pieces, detailed engine and engine compartment, opening hood, very good chassis/suspension, full interior and more. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed NM
$42
Still factory sealed. Features 401 'Nailhead' V-8 engine, detailed engine compartment, opening hood, deluxe wheel covers, detailed underside, complete interior, rubber white wall tires, a huge host of custom accessories and parts, continental kit, scissors jack and more Molded in white, clear, red-tinted clear, chrome and with rubber tires.
Plastic Model Kit, Box Condition: Good
$125
Rare and even more so in this condition. Features full race car build chassis, lift off body, detailed engine, full cockpit, detailed suspension, opening hood, extensive decals and more. Molded in blue, black, clear, chrome plate and with rubber tires. The kit has never been started. All the parts that were factory sealed (the vast majority) are still in factory sealed bags. The chrome, clear and tires are the only parts that were never factory sealed and they have been inventoried complete. Includes instructions and decals in 'excellent+' condition.
Plastic Model Kit, Box Condition: Good+
$159
Rare, original hardbox issue dated 1961. Includes the original Master Modeler's Stamp for this kit. Features detailed engine and compartment, opening hood, molded underside detail with separate torsion bar suspension, complete interior and numerous 'Hi-Style' accessories to make a custom of your choice. Molded in gloss black, clear, chrome plate and with rubber tires, metal axles and metal chassis screws. The kit has never been started. Inventoried 100% complete with all parts, decals, stamp and instructions included. NOTE: instructions are photocopies.
Plastic Model Kit, Box Condition: Sealed NM
$109
Still factory sealed and in 'near mint' condition. Very rare and from the 1970s. Features big, detailed V8 engine and engine compartment, opening hood, giant off-road tires, roll bar, detailed suspension and four wheel drive, clear sun roof, spare tire, complete interior, CB radio and antenna, west coast mirrors, large colorful decal sheet and more.
Plastic Model Kit, Box Condition: Sealed VG+
$48
Still factory sealed. Dated 1980. Can be built stock or custom with many optional parts such as roll bar, sun roof, rear bucket seats, custom wheels, etc. Includes opening hood, detailed engine with optional turbocharger, and more. Molded in color, clear, chrome and rubber.
Plastic Model Kit, Box Condition: Sealed NM
$42
Still factory sealed. 1988 issue from the classic TV show "Knight Rider." Molded in black, chrome, clear and rubber. Great kit that is a true custom - complete with KITT interior and special body panels. Molded in black, chrome and clear with rubber tires.
Plastic Model Kit, Box Condition: Sealed NM
$18
Includes the chrome plated parts shown in the photo. The chrome plating is in 'near mint' condition with only very slight and small flaws. These are from the original Jo-Han molds but are likely reproductions made in the 1990s. They came with a collection of promo bodies, windshields and chrome parts. I am 99% sure that these parts will also work on the Jo-Han model kit (and not just the promo).
Plastic Model Kit, Box Condition: Good
$75
Very well molded and detailed model which features over 160 pieces, a rolling chassis build up just like the actual automobile, detailed V-16 engine, front & rear suspension, driveline and exhaust, dual side mount tires with side view mirrors, steerable wheels, removable boot, choice of top up or down, Pilot Ray Accessory lights, rubber tires with white sidewall inserts, removable hood, well appointed interior with dual windshields and more. Molded in blue, white, black, chrome, clear and rubber tires. Never started. Inventoried 100% complete with all parts and instructions present.
Plastic Model Kit, Box Condition: Sealed Exc
$179
Original issue that is still factory sealed. Very rare in this condition. There is a seal split on the lower long side. This kit includes a very nice and colorful heavy cardboard diorama of a race track scene complete with starting line, track, bleachers, crowd and signs. The actual model can be build one of two ways - showroom stock or drag racer. Features opening hood, detailed engine, steerable front wheels, detailed chassis and interior and customizing options. Usually molded in white, clear, red-tint clear, chrome and with rubber tires. There are decals for several race cars (listed in the title).
Plastic Model Kit, Box Condition: Exc
$74
Rare one-and-only issue includes both car models. Both are well detailed featuring full engine and interior. Both have never been started. They have been inventoried 100% complete with all parts, decals and instructions present. NOTE: one windshield has a very light & small tire burn plus a light to moderate burn.
Resin Model Kit, Box Condition: Exc
$29
Rare. Before there were Batmobile kits, there was the Skyhook Models Batmobile Conversion Kit, which could make Batman's Custom Crime Fighter from the Revell Lincoln Futura. The Futura was the original car that George Barris modified to became the star of the famous TV show. The conversion parts are made from high definition resin and includes full instructions. Never started and inventoried complete with all parts and includes all paperwork. Since this is the conversion parts only, the ideal base kit is the 1995 reissue of the famous Futura 'S' kit. Ford created the Lincoln Futura as a concept car to promote Lincoln. The designers were Ford lead stylists John Jajjar and Bill Schmidt. Unlike many concept cars, this one was fully operational. The basis of the chassis was the Continental Mark II and she was powered by a 368 cubic inch Lincoln engine and powertrain. The car was hand built by Ghia in Italy and originally cost $250,000, or about $2.3 million in modern USD. The car was a big success for Ford and brought significant recognition in toys, movies and the show circuit. It was first displayed in 1955. When Ford was done, they sold the car to George Barris for $1. Because it was never titled and could not insured, Barris parked it behind the shop. However, in 1966 Barris was asked to make a car for the Batman TV series. Dean Jefferies was originally contracted with, but he could not make the car in time. Barris thought the Futura would make a fine basis for the Batmobile, and so it did. Barris always retained ownership of the car, leasing it to the studio for filming. In 2013 he sold the car to a collector for 4.62 Million US Dollars.
Plastic Model Kit, Box Condition: NM
$19
Very highly detailed, large 1/25 scale Rommel figure goes perfectly with Tamiya's large 1/25 tanks or as a stand-alone model. Includes figure and accessory goggles and binoculars. Never started and inventoried complete with all parts. The full color box drawings serve as the instructions as there are only about 6 or 7 pieces.
Plastic Model Kit, Box Condition: VG++
$85
Rare, early AMT 3 In 1 Customizing Kit. The original hardbox has great color, very good gloss four solid corners and no tape tears or price tags. Features all parts to build any version and custom tips from George Barris. Never started. Inventoried 100% complete with all parts, whitewall stickers, decals and instructions. NOTE: decals have some flaking. NOTE: many of the original black plastic parts have tire burns. I have also included non-burned gloss gray parts to replace the black ones just in case you wish to build the kit. The gloss gray ones are also from an early issue (I have seen the this early issue molded both in black and gloss gray).
Plastic Model Kit, Box Condition: Fair
$125
Very rare original issue from late 1962/1963. This issue has more than double the number of pieces of the 1970s issue. This model features parts to build any one of the three versions listed, full interior, opening hood, detailed engine, engine compartment with firewall, battery, radiator and washer jar and molded underside detail. Molded in gloss light tan, chrome plate, clear, red tinted clear and with rubber white sidewall tires, metal axles and metal body screws. The kit has never been started. It has been inventoried with all car parts 100% complete and photocopied instructions. NOTE: missing decals and the original instructions. These photocopied instructions are from a photo and not the originals. The source photos were only 'fair', which means that you can inventory and assemble the kit with them but they are not good for anything else. The box displays only 'fair' because of bug damage to the lithograph.
Plastic Model Kit, Box Condition: Fair
$18
Includes the six chrome plated parts shown in the photo. The chrome plating is in 'near mint' condition with only very slight and small flaws. These are from the original Jo-Han molds but are likely reproductions made in the 1990s. They came with a collection of 1990s promo bodies, windshields and chrome parts. I am 99% sure that these parts will also work on the Jo-Han model kit (and not just the promo).
Plastic Model Kit, Box Condition: Good-
$32
2018 reissue of this classic model. Features all parts for stock versions, many customizing parts and more. Molded in white, plastic, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$169
Still factory sealed and rare. Very highly detailed kit with 175 parts. Features a rolling chassis build just like the real truck, complete engine and engine compartment, detailed cab with complete interior, opening hood, CB radio, antenna, 5th wheel and much more. Molded in brown, clear, chrome plate and with rubber tires.
Plastic Model Kit, Box Condition: Exc
$62
Rare first release from the 1970s with the best mold quality. This is a very highly detailed model that features more than 280 parts, a full rolling chassis build just like the full-size truck, complete engine and engine compartment, detailed cab with complete interior, opening hood, full suspension, underside details and more. Molded in white, clear, red and amber tinted clear, chrome plate and with metal axles, flexible brake lines and rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc+
$80
Rare factory sealed original issue from the 1970s. This super detailed model features hundreds of parts, full rolling chassis build up like the real truck, detailed Cummins NTD-35 6 Cylinder Turbocharged Diesel Engine, Spicer 16 speed transmission, Holland sliding fifth wheel, Mercury sleeper, Hendrickson tandem rear suspension, full interior, optional Frigiking Air conditioner, tilting hood and much, much more.