Tamiya Panzerkampfwagen III Ausf. L - Sd.Kfz.141/1, 1/35, 35215
Plastic Model Kit, Box Condition: Exc
Sold
Highly detailed and beautifully molded armor kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram F-16XL Fighter - Delta Wing, 1/72, 5206
Plastic Model Kit, Box Condition: Good
Sold
Unique advanced aerodynamic test bed F-16. Traditional high quality Monogram kit that is very finely molded and detailed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Azur CAMS 37A - French Indochine Escadrille Du Donnai / Portuguese Marine Air Force - BAGGED, 1/72, 023
Plastic Model Kit, Box Condition: No Box
Sold
NOTE: bagged kit; there is no box. The box is shown for reference only. Rare kit of a rare and worthy subject. This high quality, limited production model kit features recessed panel lines, resin details, very good cockpit and crew stations, detailed engine and more. Includes paint guide and decals for both aircraft listed. Never started. The resin parts are still in the factory sealed bag and the injection molded parts have been inventoried complete. With decals and instructions. The CAMS 37 was the first design for Chantiers Aéro-Maritimes de la Seine (CAMS) by their new head designer, Maurice Hurel. The prototype was displayed at the 1926 Salon de l'Aeronautique in Paris and first flew the same year. After testing it was quickly was ordered into service before the end of the year. The 37 was a conventional biplane flying boat very similar to previous CAMS designs, being driven by a pusher propeller whose engine was mounted on struts in the interplane gap. Series production was from 1928 to 1939. The first and main production version was the amphibious CAMS 37A that was bought by the French Navy, the Portuguese Navy and the aeroclub of Martinique. Most were shipboard spotter and recon aircraft for the French Navy, eight went to Portugal, then there was the 37.11 or 37E training flying boat and finally the 37Lia enclosed cabin liaison amphibian. Total production was about 150 with most going to the French Air Force and Navy. The CAMS 37A had a very active and successful career, serving aboard almost all of the Navy's capital ships. Trials were conducted by Compagnie Générale Transatlantique on the SS Île de France to evaluate operating catapult-launched mailplanes from transatlantic liners with two specially-built 37/10s. René Guilbaud made a famous and newsworthy long-distance flight over Africa and the Mediterranean between 12 October 1927 and 9 March 1927, venturing as far as Madagascar before returning to Marseille. In the course of the flight Guilbaud covered 22,600 km (14,000 mi) in 38 stages without incident. However, aviation was moving quickly during that time and soon the CAMS 37 was outdated. It was gradually withdrawn from front line duties in the mid-to-late 1930s, and when World War II started in September 1939, the aircraft had been relegated to training and communication roles. About 60 were still flying at the start of WWII. Some trainers remained in use after the Armistice with a single example joining the Free French Navy in Tahiti and even and with a Vichy France unit in Indochina until 1942. Some examples were reportedly sold to the aeroclub of Martinique
Azur F-91 Flying Boat - RAF Heliopolis In Egypt 1942 / Spanish Civil War Nationalist Air force Deben April 1939 - (Fairchild 91 A-942) - BAGGED, 1/72, 019
Multimedia Model Kit, Box Condition: No Box
Sold
NOTE: bagged kit, there is no box. The box is shown for reference only. Dated 1997. This is a limited edition, high high quality injection molded, multi-media kit. Includes numerous plastic pieces with very fine recessed panel lines, many cast resin details (including interior parts), detailed cockpit, full passenger interior with floor, seats and bulkheads and more. Include decals and paint guide for both aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Azur TWO NA A-57 / BT-14 / NA-57 / NA-64 - Vichy France / French Navy Aircraft Carrier Bearn Summer 1940 / Luftwaffe JG107 Spring 1945, 1/72, 009
Plastic Model Kit, Box Condition: VG
Sold
SALE!! Includes two kits in the one box shown. Both models are never started and have been inventoried complete with all parts, decals and instructions present. High quality limited production kit that features recessed panel lines, resin details and full decals. The North American A-57 was derived from the incredibly successful BT-9 / NA-16 / NA-18 series which had an overall production of more than 17,000 aircraft which ultimated included the T-6 Texan family of trainers. 230 improved NA-23s were built for and sold to France as NAA 57-P-2. These were powered by Wright R-975 Whirlwind engines. Not all were delivered due to the fall of France. Many were captured and used by Germany and some were also retained by Vichy France. The Germans used them extensively to show their pilots what it felt like to fly and American aircraft. When the armistice was signed with Germany at the end of France’s Campaign in June 1940, the 119 planes that had not been delivered yet were delivered to Canada and the UK and renamed Yale I.
RS Models Reggiane Re-2007, 1/72, 72123
Resin Model Kit, Box Condition: VG
Sold
Rare kit of this prototype Italian jet fighter. This is a high quality, high-definition resin model with all fine recessed surface detail, very good cockpit, a vacuform canopy (still perfectly clear and not yellowed) and more. With paint guide and decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Special Hobby Heinkel He-59D, 1/72, SH72039
Plastic Model Kit, Box Condition: Fair
Sold
Limited run kit that includes injection molded parts with fine, recessed panel lines, many resin details, very good cockpit & crew stations and more. The kit has never been started. The resin parts are still in the internal factory sealed bag; the larger parts have been inventoried complete. Includes decals and instructions.
Hasegawa Kawanishi H8K2 Type 2 Flying Boat Model 12 Emily, 1/72, E45
Plastic Model Kit, Box Condition: Exc
Sold
Very rare. This 2017 kit is from completely new molds; it is not the common and older Emily. This one is much more highly detailed and features 283 pieces, all very fine recessed panel lines, dual row full engines, excellent interior detail, crew of 5, optional 'storage condition' or 'expansion condition' waist gun areas, dolly assembly (beaching gear), radar, torpedo and bombs loadout and more. With decals and paint guide for two different aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell The Big T By Monogram - 3 In One, 1/8, 85-2617
Plastic Model Kit, Box Condition: VG+
Sold
2005 reissue of the this 1962 masterpiece. In the early 1960s Monogram invested in a series of huge 1/8 scale models with extraordinary detail and working features. The complete line consisted of the Big 'T' Street/Rod (this model), Big Drag Competition Roadster, Big Rod Show/Go Roadster, Big Tub Custom Phaeton and Big Deuce '32 Ford Roadster. The Big T molds cost over $100,000 to produce - 1962 money - an absolute fortune at the time. The design work alone for the molds was $40,000. The total cost of the complete 1/8 scale project was over $1,000,000 - in 1963 money. The result was nearly flawless, large American automotive models that has never been equaled to this day. This issue of the Big T has over 220 precision parts. You can build it one of three ways which includes either shortened pickup truck bed, turtle-deck back or chrome round fuel tank, two different tops, chopped T or '32 Ford grill shells, bench or bucket seat interior and more. The model starts with a 1924 Ford Model T Roadster bucket, a shortened Model A pickup bed and a Chevy V-8 engine. It features 4" chopped windshield frame, custom raised or lowered top, custom pinstriping and flame decals, simulated rolled and pleated naugahyde, custom dashboard, chrome wire front wheels, rear American 200S Daisy mags, suicide type front spring perch, custom headlight brackets with tractor headlamps, winged Boyce Moto-MJeter radiator mascot, Model A tailgate, bedcover, gas tanks, Halibrand quick change rear end, 47 Ford rear backing plates and rear brake drums, custom rear radius rods, custom exhaust system, engine wiring, flexible hoses and much more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Aurora P-38 Lightning - Texas Ranger Noseart, 1/84, 498-70
Plastic Model Kit, Box Condition: Good+
Sold
1964 dated hardbox and likely the third issue due to the 70 cent price extension. This is the kit with the 'Texas Rangers' nose art decal. Molded in gloss dark olive green and clear. Never started. Inventoried 100% complete with all parts, decals and instructions. NOTE: one propeller blade is neatly broken off at the spinner base. The blade is present so it can be repaired.
Randles Lockheed Constellation C-69 - 15.75 Inch Wingspan Sold Wood Scale Model, 1/96, 101D
Vaccuform Model Kit, Box Condition: Exc++
Sold
Very rare prefabricated kit from the mid 1940s. Features 3D cut fuselage that is 12 inches long, 3D carved wings with airfoil and notched for nacelles, (4) round & carved engine nacelles, 2D cut tail parts, a factory-sealed envelope of small parts, display stand, a unopened tube of glue, excellent full size plans with numerous templates, insignia and some detail drawings and a big fold-out poster with numerous photos of the real C-69 and plenty of history. Never started. The small parts are all in the factory-sealed envelope. All other parts were never sealed and have been inventoried complete. Randles was another name for Ranco and may have simply been the deluxe version of the Ranco kits as they shared the same address. Just a few of those kits include the B-29, Cessna Bobcat, Sikorsky Helicopter and Kellett Auto Giro. There is evidence that they made boat kits also.
Entex 1913 Ford Model T Delivery Van Coca Cola - With Real Wood Parts- Templeton & Sons Taxidermists / The Texas Company (Texaco) / Carnation Milk, 1/16, 8497
Multimedia Model Kit, Box Condition: VG
Sold
Hard-to-find and very highly detailed model from the original Bandai molds. This 1970s issue builds up a rolling chassis just like the real vehicle and features detailed engine with ignition wiring, full engine compartment with hoses and wiring, removable hood, full suspension, driveline and exhaust , steerable wheels, complete interior (down to the speedometer cable and individual clutch, brake and accelerator pedals and levers), a large sheet of micro wood trim so that the wooden parts of the kit can be accurately represented with in-scale wood grain, opening rear cargo doors, full van interior, opening passenger and driver doors, flexible fuel lines, headlight wiring, choice of decals and much more. Molded in gloss black, gloss ivory, brass plate, wood tan, clear, green tinted clear (sunshade) and with real rubber tires, rubber wires and cables, small metal parts and details and a sheet of precut in-scale grain wood. The kit has never been started. Many parts are still in the internal factory sealed bags; the parts that are not sealed have been inventoried complete. Includes decals and instructions.
Minicraft 1948 MG TC Sports Car - (ex Entex / ex Bandai), 1/16, 11242
Plastic Model Kit, Box Condition: Exc+
Sold
Well detailed large-scale model from quality original Bandai molds. Features hinged hood, fully detailed chassis, engine and interior with very well molded wire wheels. Top can be up or down. Molded in clear, gray, black, chrome and with rubber wheels. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Advanced Molding Corp Ferrari 342 America Sports Car - (pre-Aurora), 1/32, 13
Plastic Model Kit, Box Condition: Good
Sold
NOTE: builder only, please read carefully. Very rare and for the advanced builder/collector of early plastic models. Advanced Molding issued 7 pioneering plastic car kits in 1954. But in 1955, Aurora purchased the molds then released them (the first in '55) under the Aurora name and artwork. They became famous under the Aurora name but virtually unknown under the original Advanced label because they were issued for year or less. Advanced cleverly advertised all 7 kits on each box - the box top shows the kit inside, and the long side panels show 3 on each side. The 7 were the Cunningham, MG, Jaguar, Alfa Romeo, Ferrari Sportster, Corvette and Ferrari 342 America. This kit is the Ferrari Sportster, is molded in bright red with rubber tires. NOTE: this kit has the body shell assembled to 'professional' quality. Fit is perfect and the seams are puttied and sanded. There is no other assembly and zero painting. All parts are present. With instructions that include a nice history of the car. Advanced was located at 54 West 21st Street, New York 10, NY. After selling the cars, Advanced remained in the plastic model business with the Trailblazers HO train series in 1955 centered around the famous "General." It was issued as a locomotive and tender, or just the cars as set (passenger, mail combine, baggage, box car, flat car and caboose), or the cars each separately and the rare freight set which included the locomotive and tender, box car, flat car and caboose.
Revell 1956 Lincoln Continental Mark II, 1/32, 1219
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. This is the 1995 reissue from the original 1956 molds. Kit features detailed engine, opening hood, chassis detail and full interior.
Verlinden Flakpanzer Coelian Turret - Conversion Kit, 1/35, 441
Multimedia Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but the seal does have some splits. Excellent conversion kit made from high-definition resin.
Anigrand Arado Ar E.340 - (E340 Ar340), 1/72, AA2070
Resin Model Kit, Box Condition: NM
Sold
Nicely detailed resin kit of the 1939 Arado twin-engine tactical and dive bomber design intended to compete for the high speed 'Bomber B' contract. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Albatross TWO USS Gearing Destroyer, 1/700, 1002
Plastic Model Kit, Box Condition: VG+
Sold
SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts and instructions present. These are waterline 1/700 scale kits that are very well molded and detailed. They represent this class of DD from World War II in 'as-completed' configuration.
Academy Boeing B-17C Flying Fortress, 1/72, 1666
Plastic Model Kit, Box Condition: Good
Sold
From 1989. Beautiful and highly detailed model of the early Fortress. Molded with all fine recessed panel lines. Features excellent cockpit detail, optional position landing gear, rotating props and wheels, bomb bay detail and full bomb load and optional position doors. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
MPC Chevy Step-Side Pickup - Chevrolet Cheyenne C-10 StepSide And Yamaha 250 CC Trail Bike, 1/25, 1-0411
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed and in investment-grade 'near mint' condition. Rare model from 1974. This truck is very well detailed featuring a 350 CID V8 Chevy engine, detailed engine compartment, opening hood, full interior, optional tonneau cover, molded underside detail, a very nice scale Honda motorcycle kit and more.