AMT 1993 Pontiac Firebird, 1/25, 8610
Plastic Model Kit, Box Condition: Exc
$29
Contains over 95 parts, detailed engine and interior, opening hood, underside detailing and much more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
AMT 1957 Chevy Bel Air Hardtop - Stock / Custom / Drag Pepper Shaker - 1957 Chevrolet Bel Air 2 Door Hardtop 3 in 1, 1/25, T280
Plastic Model Kit, Box Condition: Sealed VG++
$59
Still factory sealed and the hard-to-find late 1960s issue with the 'T' part number. Even rarer in this condition. The kit features all parts needed to build one of three versions - detailed stock 283 engine, complete 409 CID 'W' head blower or carburetter engine, engine stand, full stock interior, custom interior with bucket seats, roll bar, custom wheel and gear shift, telephone with bracket, optional stock hubcaps, mag wheels or custom bladed cap, standard tires or racing slicks, chassis with separately molded rear differential, shock absorbers, traction masters, front A arms and front lower suspension unit, detailed engine compartment with opening hood and stock or custom '57 Buick grill. The side of the box says that this is AMT's "alltime best selling kit."
Union 1948 Ford Convertible - Also Includes Parts For 1946 And 1947, 1/25, MC09-1500
Plastic Model Kit, Box Condition: VG
$52
Very well detailed kit with optional parts to build a 1946, '47 or '48 vehicle. Features an accurate rolling chassis build up just like the real car, complete drive line, excellent front and rear suspension, full exhaust, complete engine (stock or 427 CID custom), opening hood, full interior, opening doors, front seats that fold forward and more. The convertible top can be displayed up or down with boot. There are numerous other parts and features for the custom version. Molded in white and clear with chrome plated parts and rubber tires. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Jo-Han 1960 Desoto Adventurer Hardtop, 1/25, C4460
Plastic Model Kit, Box Condition: Sealed Exc++
$139
Still factory sealed and very rare in this condition. The long, low lines and graceful fins stretching from the "A" pillar to the taillights made for a beautiful Desoto. Sales in 1960 lagged, however. It was not that the car was bad - the cars were reliable and stunning performers. Desoto was more the victim of corporate political infighting than anything else. The 1960s were the last full line, with a brief introduction of two Desoto Automobiles in 1961. Since Desoto cars were still in demand, some dealerships even sued the Chrysler Corporation for discontinuing the line. This model is very well molded and detailed. It features full engine & detailed compartment, opening hood, complete interior, spotlight, gearshift/turn signal/tach assembly, seat belts, side view mirrors and more. Molded in colored plastic (the color varies kit to kit), clear, red-tinted clear, chrome plate parts and rubber tires.
Jo-Han 1962 Chrysler 300 2 Door Hardtop, 1/25, C-4062
Plastic Model Kit, Box Condition: Sealed NM
$125
Still factory sealed and rare in this condition; dates from the 1960s. This early issue that is well detailed for that time and features detailed engine and compartment, opening hood, full interior with seat belts, torsion bar suspension and more. Molded in colored plastic, clear, red-tinted clear, chrome plate and rubber tires.
Jo-Han 1934 Mercedes Benz 500K Special Sports Roadster, 1/25, GC234
Plastic Model Kit, Box Condition: Good+
$59
Every few decades an automobile is produced that becomes an world-leading classic in beauty and performance. In the spring of 1934 at the Berlin Auto Show, Mercedes-Benz introduced a new series of high speed touring cars. The engine was the super charged 8 cylinder Mercedes, and the model name was 500K; 500 for the engine's 5 liter displacement and K for "Kompressor" or super charger. One of the three 500k cars was to become an immediate classic -the Singelfingen-Bodied 500K Special Sports Roadster. Highly detailed kit with over 150 parts. The model is molded in tan, black, clear and a large tree of chrome-plated parts. Features steerable wheels, removable top, operating rumble seat, removable boot, highly detailed engine and full chassis, double spare tires, detailed interior, opening hood, chrome spoked wheels and tonneau cover. Never started. Inventoried 100% complete with all parts and instructions present.
Jo-Han Studebaker Lark Convertible, 1/25, CS-507
Plastic Model Kit, Box Condition: VG++
$64
Rare kit from the 1960s. Nicely molded kit features full interior, top boot and molded in underside details. Molded in black, clear, red-tint clear, chrome plate and with rubber tires. Never started and inventoried complete with all parts and includes instructions (which are on the back of the box)
Jo-Han 1931 Cadillac V-16 Town Brougham Fleetwood Body, 1/25, GC731-200
Plastic Model Kit, Box Condition: Fair+
$74
The Cadillac V-16 series is a true American Classic, known for it's stately lines and effortless motion. This model has very good molded detail from the wicker sides to the crest on the rear seat top. It features over 160 parts and is very nicely molded. Features super-detailed V-16 engine, steerable wheels, 2 side mount tires, partition glass, Chauffeur's Top, opening hood, spoke wheels, rubber tires with white sidewall inserts, super detailed rolling chassis, full interior and optional "Pilot Ray" accessory lights. Molded in chrome, black, clear, red and rubber with a large tree of chrome plated parts. Never started. Inventoried 100% complete with all parts and instructions present.
Monogram Jaguar XKE - (ex Aurora), 1/25, 2243
Plastic Model Kit, Box Condition: Sealed Exc+
$62
Still factory sealed. 1978 reissue of the Aurora kit from the original 1962 molds. Monogram only reissued the best of the Aurora kits and this one is no exception. This Jag was an excellent effort from Aurora and this was a very well detailed model for that time. Features detailed engine, excellent engine compartment, full exhaust, opening hood, detailed suspension and differential, complete interior and much more. Molded in colored , clear and chrome plastic with rubber tires - just like the Aurora issue.
AMT 1959 Chevrolet Corvette - Stock or Custom, 1/25, T393
Plastic Model Kit, Box Condition: Exc
$32
1970s 'T' part number issue that can built one of two ways. Features detailed engine compartment and opening hood, full interior, detailed molded chassis, numerous custom parts and more. Never started and inventoried complete with all parts and includes decals and instructions.
AMT Chevrolet 1955 Corvette - Stock or Drag, 1/25, T287
Plastic Model Kit, Box Condition: VG
$34
This original issue from the early 1970s is a well molded and detailed kit that features all parts for stock or race versions, custom 2x4 carbs, chrome valve covers, headers, four speed shifter, steering wheel, headlight fillers, drag grille, rear spring shackles, extended shocks, traction bars, wheels & rims and more, opening hood, detailed engine/chassis and interior, removable hardtop and decals. Nicely molded in chrome, white, clear and rubber. Never started. The chrome and white parts are still in the factory sealed bags and includes clear, tires, decals and instructions.
MPC Special Edition Corvette - Sparkling Gold Issue -1984 Chevrolet, 1/25, 1-3724
Plastic Model Kit, Box Condition: VG
$39
Limited edition molded in sparkling metallic gold finish. Features many custom parts such as air dam, spoilers and wheels, fully detailed engine & engine compartment, opening hood, complete interior and much more. Molded in "sparkling metallic gold" plastic, chrome, clear and with rubber tires.
MPC 1969 Pontiac Trans-Am Firebird - Stock Or Trans Am Versions, 1/25, 727-200
Plastic Model Kit, Box Condition: Good-
$59
Very Rare original issue. This model can build one of two versions and features a choice of engines: 400 CID V-8 or 225 CID OHC 6, good chassis and suspension with optional exhaust for either engine, complete interior, optional roll bar and optional soft vinyl seats, stock and optional tires, stock or clear hood and more. Molded in white, clear, chrome plate and with rubber tires & metal axles. NOTE: this kit has very neat subassembly as follows: 400 CID engine and transmission; steering wheel to dash; head rests to front seats; front wheel assemblies built and pins/shafts broken. The body is neatly painted green. Inventoried and NOTE: missing one roll bar support; easily made from sprue. Otherwise complete with all other parts, decals and photocopied instructions. The original instructions are missing.
MPC 1968 GTO Pontiac Hardtop - Stock / Custom / Funny Car, 1/25, 1168-200
Plastic Model Kit, Box Condition: Fair++
$39
Very rare original issue from late 1967/68. NOTE: builder kit only. Not collectible. Please read carefully. NOTE: this kit has been started; body painted; engine built, red tail lights to stock bumper, custom light buckets to custom rear roll pan, seats, shifter, dash and steering wheel to interior; Differential/exhaust & fuel pump to chassis and battery to radiator support. Windshield present, completely usable but broke in center (where it does not show). Inventoried and NOTE: missing two custom rims, stock hood (clear hood is present and fine), one custom spoiler side support and decals. Otherwise complete with all other parts and includes instructions.
Pyro Auburn 1935 Supercharged 851 Boattail Speedster - From Upgraded Molds, 1/25, C501-200
Plastic Model Kit, Box Condition: Good+
$44
From the mid 1960s and still the only larger scale Auburn kit in injection molded plastic. Improvements over the earlier issues include chrome wire wheels, rubber tires, clear parts and two good-sized trees of chrome plated details. The body & other parts are molded in red plastic. Features detailed engine, opening hood and good interior detail. Never started. Inventoried complete with all parts and instructions present. The '35 Auburn weighed 4200 lbs. and was one of the few cars of that time to have hydraulic brakes. Power came from a 150hp (@4000) supercharged engine with three inch exhaust pipes that easily sped the car to over 100 mph. Ab Jenkins set a record with a stock issue 851 at Bonneville Salt Flats in July of 1935, and became the first one to pilot a stock car for over 12 hours at an average of over 100 mph.
Monogram Jaguar XKE - (ex Aurora), 1/25, 2243
Plastic Model Kit, Box Condition: Good
$52
1978 reissue of the classic Aurora kit from the original 1962 molds. Monogram only reissued the best of the Aurora kits and this one is no exception. This Jag was an excellent effort from Aurora and this was a very well detailed model for that time. Features detailed engine, excellent engine compartment, full exhaust, opening hood, detailed suspension and differential, complete interior and much more. Molded in white, clear and chrome with rubber tires - exactly like the Aurora issue. Never started. Inventoried and NOTE: missing one small part, #33, which looks like an accelerator pedal and mounts to the front floor. Otherwise complete with all other parts and instructions.
AMT Chevrolet 1963 Corvette Stingray - Split Window Coupe, 1/25, 6550
Plastic Model Kit, Box Condition: Exc
$58
Late 1980 issue of this fine model can be built as stock or custom. Custom options include different intake manifolds, 4 Weber carbs or supercharger with "Bug Catcher" injector, drag headers, racing tires, two custom helmets, exhaust tips, drag chute and more. Model features good underside detail, complete interior, detailed engine & compartment, opening hood and more. Usually molded in silver, chrome, clear, red-tinted clear and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals (in amazing 'mint' condition) and instructions.
AMT 1932 Ford Roadster Customizing Kit - 3 in 1 Build It Stock / Street Rod / High-Boy Drag Racing, 1/25, 2632-170
Plastic Model Kit, Box Condition: Good+
$65
Rare 1960s 3 in 1 issue hardbox issue. This excellent model can be built stock, custom or competition. Features complete Ford stock Model B and Chrysler racing engines, removable hood, detailed suspension and driveline, full interior, opened or closed rumble seat, folded or raised top, luggage carrier, two bar, drag slicks, roll bar, reversed rims and more. Kit is molded in black, clear and chrome plated plastic. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box would grade slightly better than 'good+' but is rated as such because there is a moisture stain on both long sides.
MPC 1969 GTO Pontiac Hardtop - Stock / Custom / Funny Car, 1/25, 1169-200
Plastic Model Kit, Box Condition: Good++
$235
Rare original issue from 1969; even rarer in this condition with the contents exactly as it left the MPC factory. Features all parts to build one of the three listed versions, detailed 400 CID stock engine or blown racing version, chassis with stock differential & exhaust or detailed funny car front and rear suspension and steering linkage, complete stock or racing interior with roll cage, stock and custom/racing hood, optional trailer hitch and trailer mirrors for each side, rear air foil, custom front/rear treatments and more. Molded in white, chrome, clear, red-tinted clear and rubber tires. Never started. The white parts are still in the factory sealed internal bag; the clear & chrome parts were never factory sealed and have been inventoried complete. Includes decals and instructions in amazing 'near mint' condition.
AMT Mercury Capri II Cafe Racer, 1/25, T224
Plastic Model Kit, Box Condition: Sealed VG++
$52
Still factory sealed but the seal has split on the bottom and upper right side. This fine kit from the 1970s features detailed engine and compartment, opening hood, complete interior, very good front and rear suspension and driveline detail, optional fender flares and more.