Novo Techna Soviet Type L Series II Submarine, 1/400, K4003
Plastic Model Kit
$10
Ex-Soviet Union kit that is very well molded for that time with very fine detail and hull drain holes. Full hull model measures 7.5 inches long when assembled and includes display stand and decals. The kit has never been started. The parts are still in the internal factory sealed bags, which is attached to cardstock that is folded in two. At times the factory workers had to get pretty creative because of a shortage of staples. Beyond staples, I have seen the bag of parts attached with a clothing snap, a rivet or even sewn on with thread!
Historic Mig-19S Farmer C - S-105 - USSR / Czechoslovak Air Force, 1/48, 48-008
Multimedia Model Kit, Box Condition: Good
$34
Nicely detailed and molded model features all fine recessed panel lines, many photoetched parts, film instruments, detailed cockpit, nicely done intake and exhaust, drop tanks, choice of multi-piece opened or one-piece closed canopies, optional position speed brakes, rocket pods and more. The kit has never been started. Internal factory sealed bag including decals and instructions.
Unicraft Dornier P.247 - (DoP247 / P-247), 1/72
Resin Model Kit, Box Condition: Sealed NM
$54
Still factory tape sealed. Very rare model of this advanced German design. Nicely detailed, limited-run resin kit.
Hasegawa Mitsubishi A6M8 Zero Fighter Type 54 / 64, 1/48, SP247
Plastic Model Kit, Box Condition: Exc
$78
Rare special issue of the A6M8 dated 2001 that includes numerous resin parts to make a correct aircraft. Very well detailed featuring 88 pieces, complete cockpit, detailed engine and gear wells, drop tank, optional position canopy and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
STC Start Orbiter Buran and Carrier Energia - USSR Space Shuttle, 1/288
Plastic Model Kit, Box Condition: Exc
$64
1988 Russian kit of the never-flown Space Shuttle. Includes shuttle and carrier with launch pad base. Never started. Inventoried with all plastic parts present. Includes decals and instructions.
StromBecker USS Tacoma Frigate, C17
Wood Model Kit, Box Condition: Fair-
$69
Excellent kit from the 1950s that measures 10.5 inches long when assembled. StromBecker was famous for this line of pre-carved wood kits. Made of solid Western Pine hardwood - not balsa. The carving is done to the final shape. When complete it makes an impressive desk top display. Never started. Inventoried and NOTE: Missing rear subdeck. I have included a full-size tracing of this part and included the measurements on the drawing. Otherwise complete with all other parts and instructions.
Monogram Boeing 2707-200 SST United Airlines, 1/400, PA211-100
Plastic Model Kit, Box Condition: Good+
$98
This is the 1968 release of this kit, which may have only been issued twice. The Boeing SST was modeled here in the second (-200) variant which still had the swing-wing design which proved impractical in this aircraft. The damaging effects of sonic booms over population centers ultimately contributed to the cancellation of the project. Nicely molded with all recessed panel lines. The kit has wings that swing, United Airlines decals and a unique display stand. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions.
AV Models Kawanishi Baika Project No.1, 1/72, 72380
Resin Model Kit, Box Condition: Exc
$29
Beautifully molded in high definition resin and includes cast metal details and film instruments. Never started. Inventoried and NOTE: missing one piece, a 'V' shaped brace (for the gear strut); easily made from plastic stock or pulled sprue. Includes all other parts, decals and instructions.
Hasegawa Mitsubishi A6M5 Zero Fighter Type 52 Night Fighter, 1/48, 09543
Plastic Model Kit, Box Condition: Exc
$32
Very well detailed featuring complete cockpit, detailed engine and gear wells, drop tank, optional position canopy and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.
General Crafts Parts Decor Airplane With Frame, 2806
Plastic Model Kit, Box Condition: Sealed Exc
$22
Still factory sealed. Dated 1973. These kits were marketed under 'General Crafts' which was part of AMT. If you look closely, you can see AMT car parts making up much of the aircraft! The wings are car grilles and there are shock absorbers, semi side view mirrors, mag wheels, oil pan and more. Although not a scale model kit, I can remember this being a very popular craft at the time. Includes a 8.75" x 6.76" frame with metallic trim, black background with part identification printed directly on it, plated plastic injection molded parts, glue and instructions. There were at least 6 craft sets total; 2805 Early Roadster, 2806 Airplane and 2807 Viking Ship were all this size; the three others, 2905 Antique Auto, 2906 Iron Horse and 2907 Antique Planes were in 14.75" x 10.75 frames.
KeilKraft Hawker Hurricane MkIIc, 1/72, F1
Plastic Model Kit, Box Condition: VG
$28
KeilKraft was produced by the E. Keil & Company, Limited of Wickford, Essex Great Britain. Keil specialized in stick and tissue scale flying models and gliders. However, they moved into injection molded kits after WWII. Four kits were planned but only two were released. This Hurricane was the first one, followed by F2, a Sopwith Camel. The Stuka and Chipmunk were never issued. This kit has not been started. The parts are either still in the factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
A A Hales Ltd Mayflower Pilgrim Ship Marinecraft Kit - 13 Inch Long Wooden Ship Kit, 651
Multimedia Model Kit, Box Condition: VG
$64
Very nicely early kit from Hales who also had the Yeoman line of flying aircraft kits. This model features a shaped wooden hull, early injection molded life boats and anchor, a full set of flags, color side decorations, name plate and transom decorations, full sails, brass cannon and brass rigging parts, precut wood, wood stock for masts, yards, metal stock, three types of rigging material, detailed instruction sheet, large, foldout photographic sheet showing construction at many phases (and keyed to the instructions) and full size plans with rigging details. The kit has never been started. The small parts are still in the internal factory sealed bags and the parts that were never sealed have been inventoried complete including color sheet, instructions, photo sheet and plans.
A A Hales Ltd Cutty Sark Marinecraft Kit - 17 Inch Wooden Ship Kit, 658
Multimedia Model Kit, Box Condition: VG
$65
Very nicely early kit from Hales who also had the Yeoman line of flying aircraft kits. This model features a shaped wooden hull, early injection molded life boats, dead-eyes, figurehead and ships wheel, a full set of flags and sails, injection mast platforms, metal chain, numerous brass rigging parts, precut wood, wood stock for masts, yards, metal stock, three types of rigging material, colorful insignia sheet with front scrollwork, rear scrollwork and name, name plate and cabin sides with windows and doors, detailed instruction sheet, large, foldout photographic sheet showing construction at many phases (and keyed to the instructions) and full size plans with rigging details. The kit has never been started. The small parts are still in the internal factory sealed bags and the parts that were never sealed have been inventoried complete including flags, instructions, photo sheet and plans.
Blue Rider Oeffag Albatros D.III (253 Series) - Conversion Kit - Bagged, 1/72, BR101
Vacuform Model Kit, Box Condition: Sealed
$10
Still factory sealed. Very high quality conversion kit. Finely molded vacuform parts with recessed panel lines. Includes full interior. Has metal detail parts parts (engine, wheels, prop, exhaust and more) and decals for four aces aircraft.
PSC72 Shawrow SH-2 - (Shavrov SH2), 1/72
Vacuform Model Kit, Box Condition: Sealed
$10
Never started. Complete with all parts and instructions.
Britavia Models Westland Dragonfly H.R.3 - (HR3 S-51) - Bagged, 1/72
Vacuform Model Kit, Box Condition: Sealed
$32
The Dragonfly was a license built version of the Sikorsky S-51. First flight was in 1946 and power was a Pratt & Whitney Wasp Jr. This is a high quality kit that is well molded. The main parts are molded in clear for realistic windows and are still in excellent condition (not yellowed). All the other parts are metal details such as nose wheel and strut, two main wheels and struts, rotor head, tail rotor, pilots seat, instrument panel, rear bench seat, tail rotor guard and winch. Has full decals for two aircraft including one stationed on HMS Bulwark in 1955. One set is for a dark sea grey aircraft and another with a lighter sky finish. Never started. The metal parts are still in the factory sealed bag and the other parts have been inventoried complete with decals and instructions.
Maintrack Wessex HAS-3 Conversion from HAS1, 1/72
Resin Model Kit, Box Condition: Sealed Mint
$6
Resin conversion with full instructions.
DB Conversions Curtiss P-40 A/B/C Nose and Spinner, 1/72, DB9
Resin Model Kit, Box Condition: Sealed
$6
Beautifully cast resin nose and spinner for your P-40 conversion. Includes illustrated instructions. Never used and still in the original factory sealed bag.
Nemecek Model Messerschmitt Bf-109-T2 / T1 / T0 - (Bf109T2), 1/72, MW72001
Plastic Model Kit, Box Condition: Exc
$34
This excellent, limited run injection molded kit was produced by Miroslav Nemecek in the Czech Republic. Very cleanly molded and well detailed model features all recessed panel lines, parts to build one of the three versions and has optional spinners, canopy or folded wings, full cockpit, detailed engine with removable cowl and more. Includes decals for aircraft stationed in Norway and for carrier trials for the aircraft carrier Graf Zeppelin. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Crest-Armtec 86mm German PAK Gun - Bagged, 1/76, 7
Metal Model Kit, Box Condition: Exc
$12
Factory sealed. All metal kit from the early 1960s with excellent detail.