Revell A-7A Corsair II - US Navy VA-147, 1/72, H114-130
Plastic Model Kit, Box Condition: Good+
Sold
First release hardbox dated 1967. Features optional position landing gear, good intake detail, gear well detail and movable wheels, cockpit and pilot figure, optional folded or 'flight' position wings and full weqapons load of (6) 250 lb bombs, (12) 500 lbs bombs and (2) AIM-9 Sidewinder missiles Never started. Kit is either factory bag sealed inside or inventoried 100% with all parts, decals and instructions. The box would grade much higher than 'poor', but one short side panel has been cut off the box top.
Revell North American Rockwell OV-10A Bronco - US Marines, 1/72, H145
Plastic Model Kit, Box Condition: Mint
Sold
Dated 1970 with an amazing 'mint' condition box. Nicely molded and detailed model for that time with very fine raised panel lines and recessed control surface lines. Early 'A' variant includes crew, detailed cockpit, rotating propellers and a full loadout with AIM-9 Sidewinders, drop tanks and iron bombs. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Williams Brothers English Vickers Machine Gun - for Large Scale RC Aircraft - Bagged, 1/6, 160
Plastic Model Kit, Box Condition: Mint
Sold
Still factory detailed. Listed as "2 Inch Scale" which I believe is 1/6 scale. Highly detailed large machine gun measures 6.5 inches long when assembled. Originally issued as an accessory for super detailing RC, free flight or control line aircraft kits.
Williams Brothers 1918 LeRhone Rotary Engine Cylinder Kit - for Large Scale RC Aircraft - Bagged, 1.5 Inch
Plastic Model Kit, Box Condition: Mint
Sold
Still factory sealed. Originally made for large scale RC Aircraft. Cylinder measures 1.5 inches high and .75 inches in diameter near the middle of the cylinder.
ESCI Delta Mirage 2000C - Greek or French Air Forces, 1/48, 4074
Plastic Model Kit, Box Condition: VG
Sold
Nicely molded with all fine recessed panel lines, good cockpit and gear well detail, optional position canopy, two types of missiles (including air-to-air), centerline drop tank and paint guide and decals for both air forces listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa Kawasaki KI-45Kai Hei Toryu Nick 5th Flight Regiment, 1/72, CP4
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed. Dated 1996 and has 73 pieces. Very well molded and detailed.
Hasegawa Aichi E13A1 a/b Type-Zero 'Jake' - Prototype - Service or E13A1a, 1/72, JS056-150
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed. From the late 1970s/early 1980s. Very nicely detailed kit featuring very fine raised panel lines and recessed control surface lines, crew of three, good cockpit and engine detail and optional position engine cowl to display the engine. Includes paint guide and decals to make the Prototype (orange overall), a light gray service version or the green E12A1a or b variants.
Tamiya US Army M-42 (M42) Duster Self-Propelled AA Gun - Motorized, 1/35, 3027-850
Plastic Model Kit, Box Condition: VG++
Sold
Very well detailed and molded kit. Features RE-26 motor (included) and all-metal gear box. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Frog Fairey Delta II Red Gold Token Issue, 1/72, F333
Plastic Model Kit, Box Condition: VG
Sold
Older but nicely done model of the high speed British research aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Frog Bristol Beaufighter Mk.21 Spin Issue - 31 Sq 77 Wing Dutch East Indies 1944 / 22 Sq RAAF Australian Air Force Sanga Sanga Phillipines Late 1944 - Green Series, 1/72, F291Spin
Plastic Model Kit, Box Condition: Exc
Sold
Hard-to-find 1970s 'Spin' version. This kit contains the extra parts required to accept the Frog F20 Spin-a-prop motorizing kit (not included). Nicely molded kit with no rivets for a realistic model when built. Has load-out and markings for the two aircraft listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.
Pyro Bunker Hill Antique Pistol, 1/1, 204-129
Plastic Model Kit, Box Condition: Poor
Sold
NOTE: builder kit only, please read carefully. Early hardbox - most likely the 2nd issue. Molded in gun metal silver and dark wood brown. NOTE: no parts are assembled, but the trigger was glued at some point and fell neatly out of the stock. There was no other assembly. NOTE: missing 4 plastic 'screws' (can be replaced with real screws) and ram rod ferrule. Otherwise inventoried with all other parts present including instructions. From the mid-1960s. In addition to cars, ships, planes and figures, Pyro added an excellent line of well-known and not-so-well-known life-sized (1/1) scale pistol and rifle models to their line. In each case Pyro gained access to the actual weapon during the kit design, insuring a very accurate model. This is a full size 15 inch long copy in wood grain and metal colored plastic.
Aurora General Dynamics TFX F-111A - USAF, 1/48, 368
Plastic Model Kit, Box Condition: Good++
Sold
This is the 'Big A' issue from 1972 of this classic kit. Aurora put forth an excellent effort at the time on this big F-111. It features good detail and swing wings, retractable landing gear, pilot and radar navigator and Air Force markings. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Glencoe Vickers Viscount - Capitol - BEA - Scalemaster Air Canada and Trans-Canada Air Lines, 1/96, 05501
Plastic Model Kit, Box Condition: Good++
Sold
This kit includes large and colorful decal sheets for the three airlines listed above including Scale-Master sheet #05501-3 with older Trans-Canada Air Lines and newer Air Canada markings. Nice model from ex-Hawk molds. Well detailed kit. The kit has never been started. Inventoried 100% complete including both decals and instructions.
Revell Tu-95 Bear Bomber, 1/144, 4727
Plastic Model Kit, Box Condition: Sealed VG+
Sold
Still factory sealed but the seal has drawn the box concave. Dated 1992. Hard to find 1/144 scale kit that is very cleanly molded and well detailed.
Revell Boeing PT-13D Kaydet / Navy N2S-5, 1/72, H649-50
Plastic Model Kit, Box Condition: Good++
Sold
1966 one piece box issue. Markings for both versions are included. Never started. NOTE: missing one (of two) tiny windscreens. Inventoried with all other parts, decals and instructions present.
Hit Kit Schreck FBA 17 HE-2, 1/72, HK015
Multimedia Model Kit, Box Condition: NM
Sold
Short run (limited edition) kit. Includes photoetched details with full color decal sheet. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Monogram C-47 'Spooky' Gunship - Heritage Edition Issue, 1/90, 6059
Plastic Model Kit, Box Condition: Sealed VG
Sold
Still factory sealed but the seal has splits as shown. Heritage Edition from 1983. Nicely done 'Puff The Magic Dragon' gunship based on Monogram's successful DC-3 molds.
Revell DD131 USS Buchanan Four Stack Destroyer, 1/240, H375-229
Plastic Model Kit, Box Condition: Good+
Sold
1960 Picture fleet issue with John Steel boxart. Large scale and well detailed. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions. NOTE: one yardarm is broken but the broken section is present. One davit brace is broken off and missing.
Model Shipways New Bedford Whale Boat 1850-1870, 1/16
Wood and Metal Model Kit, Box Condition: Exc++
Sold
Very accurate and highly detailed kit. "Authenticity is NOT sacrificed for simplified construction." With this model you are building a miniature boat just like the real thing. Features plank-on-frame construction based on full size construction methods, die-cut molds and planks that require only a little additional sanding, beautiful full set of metal and wood fittings, 6 sheets of highly detailed plans and a 160 page detailed construction manual with historical references. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including all paperwork.
AMT Autocar DC 9964B Dump Truck, 1/25, T817
Plastic Model Kit, Box Condition: Good
Sold
Very highly detailed model with 310 parts. Features working dump bed, highly detailed engine and engine compartment, opening hood, rubber tires, fully detailed rolling chassis and suspension, full cab and much more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (chrome and clear only) have been inventoried complete including decals and instructions.