AMT 1957 Chrysler 300C Two Door Hardtop, 1/25, 30046
Plastic Model Kit, Box Condition: Exc+
$30
Highly detailed model features 392 V-8 engine, TorqueFlite Transmission, whitewall tires, detailed engine compartment, opening hood, deluxe wheel covers, detailed underside and complete interior. Molded in light gray, clear, red-tinted clear, chrome and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Execuform McDonnell F2H-3/4 Banshee - Bagged - (F2H3 F2H4), 1/72
Vacuform Model Kit, Box Condition: Sealed
$10
Still factory staple sealed. Basic vacuform kit. Never started. Complete with vacuform main parts, detailed plans, clear parts and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
ESCI Bell UH-1D Huey UN Rescue, 1/48, 4037
Plastic Model Kit, Box Condition: Exc
$36
Unusual civil issue with very good detail including full interior with cockpit and stretchers, opening doors, turbine engine and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hobby-Time McDonnell F3H-1 Demon Shipboard Interceptor - (F3H1), 1/45, 2003
Vacuform Model Kit, Box Condition: VG
$65
Rare large scale Demon. Very close to 1/48; measures 15.5 inches long when assembled. Can be built as a flying model with retracted landing gear or a static model with extended landing gear. Features recessed panel line detail, vacuform main parts, injection molded details, clear canopy, catapult launcher and decals. The kit has never been started. Inventoried 100% complete including decals and instructions.
California Model Co Nieuport 17C-1 - 19.75 Inch Wingspan Balsa Flying Aircraft - (Ni17 Nieuport 17), 1/16
Wood Model Kit, Box Condition: Good
$52
Probably from the late 1940s or early 1950s. Higher quality stick-and-tissue flying model to a constant 1/16 scale. Can be built for static scale display or flown with rubber, CO2 or small gas motors for power. Features quality balsa printwood and strip wood, factory-carved balsa propeller (needs final finishing), completely finished wheels and thrust button, hardware, stock wood and metal as required, blocks as needed, covering tissue and beautifully drawn full-size plans. The model has not been started. Inventoried complete with all parts and plans. Made by California Model Company out of Long Beach, CA USA. If you have more information on this manufacture, please email me. How far back they go is unknown; they claim to have the 'Know How of 30 Years Experience' on the box side, but that could be interpreted many ways. From the box there was at least a Spad, SE-5, Fokker DVII, Niuport and a Sopwith Camel for rubber power as well as the 'Spacer A-B' & 'Spacer 1/2A' and the indoor Featherette. We know they also issued some ex-Suydam railroad kits as well. From Bill Baker Jr - "California Model Company originated in Long Beach, Calif in the late 1940's or early 1950's. My grandparents, William (Bill) Loyal Baker and his wife, Ruth (Tripp) Baker were the founders. The company started out as primarily balsa based model aircraft but later, in the late 50's or early 60's, branched into the model RR craft kits and Cub Scout craft kits. They even had a balsa speed boat kit powered by a model airplane gas engine adapted to fit. When they retired, around 1968 or 1969, they sold the business and the "shop" in North Long Beach they built to house their business. I have many fond memories as a young child "working" with them in the shop, assembling kits. I have a few unbuilt kits today!"
AMT Ford Courier Minivan - Pickup Truck, 1/25, 2701
Plastic Model Kit, Box Condition: Exc
$38
1970s one and only issue. This model can be assembled as a stock pickup truck, custom truck or minivan. Nicely detailed with over 80 parts and features rolling chassis construction just like the real truck with full suspension, exhaust gas tank and more, detailed engine and compartment, removable hood, full interior, working tailgate, optional wheels, roll bar, minivan topper, optional bumper guard and more. Molded in white, clear, chrome and with rubber tires. The kit has never been started. The parts that were sealed at the factory are still sealed. The parts that were never sealed (chrome & clear) have been inventoried complete. Includes decals and instructions.
ESCI Sepecat Jaguar A, 1/48, SC-4036
Plastic Model Kit, Box Condition: Good
$19
Features optional position canopy and speed brakes, cockpit detail, external stores, ordnance and more. Includes decals for two French aircraft and paint guide. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
MPM SB2U Vindicator - US Marines VMSB-131 Camp Mitchell New Bern North Carolina August 1941 / VMSB-2 Ewa Hawaii from March 14 till December 7th 1941, 1/72, 72087
Plastic Model Kit, Box Condition: VG+
$29
Detailed limited run injection molded kit with many cast resin details. Features fine recessed panel lines, highly detailed cockpit and decals for two aircraft. The kit has never been started. The parts are all still in the internal factory sealed bags. Includes decals and instructions.
LS Mitsubishi A6M5 Type 52 Zeke Zero - Motorized, 1/72, 106-100
Plastic Model Kit, Box Condition: Exc+
$26
Classic early Japanese box art with a high quality LS model. It is engineered to be motorized with the battery in the stand. As was the practice, all of the hardware is included but the motor is not. Features moving rudder, wing flaps and ailerons, sliding canopy and retracting landing gear. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Aurora British SE-5 Scout, 1/48, 103-100
Plastic Model Kit, Box Condition: Sealed Exc+++
$49
1963 issue with Jo Kotula box art. Still factory sealed but the seal has split, and there is minor box wear on the center of the far left side.
Revell Grumman Martlet Mk V / FM-1 (F4F Wildcat) - Royal Navy or USS Core, 1/32, 4784
Plastic Model Kit, Box Condition: Exc
$44
Dated 1992 and includes a very large decal sheet with extensive stencils and markings for Royal Navy Martlet V, 1932 Squadron, NAS Englinton, June 1944 and Grumman FM-1 from VC-12 from the USS Core, Autumn 1943. Features detailed cockpit, sliding canopy, pilot figure, rotating wheels and props and removable cowl to show the Pratt and Whitney R-1830 engine. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
E&B Valley Railroad Co Single Or Double Deck Stock Car With Trucks - HO / HOn3 Narrow Gauge, 1/87, 018-3100
Plastic Model Kit, Box Condition: VG+
$32
Superb injection molded kit with plastic truck set and dummy couplers. Highly detailed with a large number of parts. While model aircraft mold makers and molding machine operators were claiming that you could not mold parts this fine, several model train companies, like E&B Valley, were busy proving them wrong. This is kit for the serious model railroader who demands prototype fidelity. Molded in black plastic. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Please note that these E&B kits did not come with decals.
Merlin Models Fokker E-V / D-VIII - German or Polish Air Force, 1/72, 16
Multimedia Model Kit, Box Condition: Good
$19
Limited edition kit with finely cast metal parts and details and injection molded main airframe parts. Includes decals for multiple versions. The kit has never been started. Internal factory sealed bag including decals and instructions.
Novo Techna Soviet Type D Series I Submarine, 1/400, K4004
Plastic Model Kit, Box Condition: Good
$10
Ex-Soviet Union kit that is very well molded for that time with very fine detail and hull drain holes. Full hull model measures 7.5 inches long when assembled and includes display stand and decals. The kit has never been started. The parts are still in the internal factory sealed bags, which is attached to cardstock that is folded in two. At times the factory workers had to get pretty creative because of a shortage of staples. Beyond staples, I have seen the bag of parts attached with tape, a clothing snap, a rivet or even sewn on with thread!
Welsh Vickers Super VC-10 - East African Airlines, 1/144, SL38
Vacuform Model Kit, Box Condition: Exc++
$22
Very high quality vac kit with cast metal details. Never started. The small parts are still in the factory sealed bags. The big parts were never sealed and have been inventoried complete including very large & colorful 'East African' decals and instructions.
Hasegawa Mitsubishi Ki-67 Type 4 Hiryu Peggy - 7th Army Group 3rd Sq / 2nd Flight Company Sq. / 74th Army Group 1sy Sq, 1/72, CP19
Plastic Model Kit, Box Condition: Exc+
$23
Very highly detailed with full interior and optional position bomb bay doors with full interior and bomb load. Has markings for three aircraft NOTE: this kit has 'professional' quality subassembly as follows: Base (#19) to turret ring; engines assembled; cockpit & cabin 98% assembled. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Aurora-KB De Havilland DH-10A Bomber - Collector's Edition Issue, 1/48, 1125-300
Plastic Model Kit, Box Condition: Exc+++
$40
1972 hardbox issue in a beautiful 'Excellent+++' condition box. Aurora greatly improved these molds for this issue which makes it an excellent builder. Features 'good' cockpit detail, two Lewis machine guns, twin Liberty 12 engines, pilot, two gunners and 2 mechanic figures, painting guide and rigging guide. The kit has never been started. Inventoried and NOTE: missing the display base and one very small piece: the flat windscreen. I have included thick clear styrene as this is very simple to make. Otherwise includes all other parts and decals and instructions both in 'near mint' condition.
Hasegawa Mitsubishi A6M5 Zero Type 52 - 1995 Commemorative Flight or 253 Flying Group WO T. Iwamoto 1944 Rabaul / 381FG 1944 Toyohasi / 653FG Commander IJN Zuikaku 1944 Philippines / 261FG June 1944 Saipan, 1/48, JT23X
Plastic Model Kit, Box Condition: Exc
$26
Limited edition kit with decals for the commemorative flight of a restored Zero in 1995 and the four other aircraft listed as well. Very nice kit featuring complete cockpit, detailed engine and gear wells, drop tank, optional position canopy and decals for several aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
A A Hales Ltd Mayflower Pilgrim Ship Marinecraft Kit - 13 Inch Long Wooden Ship Kit, 651
Multimedia Model Kit, Box Condition: VG
$58
Very nicely early kit from Hales who also had the Yeoman line of flying aircraft kits. This model features a shaped wooden hull, early injection molded life boats and anchor, a full set of flags, color side decorations, name plate and transom decorations, full sails, brass cannon and brass rigging parts, precut wood, wood stock for masts, yards, metal stock, three types of rigging material, detailed instruction sheet, large, foldout photographic sheet showing construction at many phases (and keyed to the instructions) and full size plans with rigging details. The kit has never been started. The small parts are still in the internal factory sealed bags and the parts that were never sealed have been inventoried complete including color sheet, instructions, photo sheet and plans.
La Belle D&RG Closed Vestibule Coach HOn3 Narrow Gauge - Craftsman Model, 1/87, HOn3-25
Wood and Metal Model Kit, Box Condition: VG
$28
Please read the article on this website about older HO train kits and the modeling revolution they caused in the late 1930s/1940s. During the golden era of realistic train models, La Belle Woodworking Company created perhaps the very finest scale kits of early American passenger equipment. The kit features die cut hardwood parts (no balsa) such as pre-cut and scribed sides with all windows factory cut, car ends done in the same fashion, carved clerestory roof, tinted clear clerestory window material, working end diaphragms, excellent underside details & other metal details, building instructions and full size plans. I have seen these models built and they look identical to the real prototypes. The kit has not been started and is complete with all parts, plans and instructions.