Fujimi British Aerospace Sea Harrier FRS.1 - 801 or 899 Squadron, 1/72, 7
Plastic Model Kit, Box Condition: VG+
Sold
This model dates from when Fujimi made the finest models in the world. Features all fine recessed panel lines, cockpit detail, optional position air brake and a very large variety of weapons including Aden 30mm gun pod, long range tanks, 1000 lb iron bombs, AIM-9 Sidewinders, rocket launchers, AS37 missile and more. Decals represent two different Royal Navy aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Supermodel Aermacchi MB-326K - Italy / South Africa, 1/72, 10-012
Plastic Model Kit, Box Condition: Exc
Sold
Nicely molded and detailed kit with fine raised panel lines and recessed control surface lines. Features some cockpit detail, wing tip drop tanks, optional position canopy and speed brake, underwing drop tanks and rocket pods and markings for all both air forces. The kit has never been started. Internal factory sealed bag including decals and instructions.
Tauro Model R.N. Gorizia Italian Heavy Cruiser - With Photoetched Railings, 1/350, 203
Plastic Model Kit, Box Condition: VG+
Sold
Large and highly detailed kit with 229 parts. Of the Zara class, the Gorizia was lucky to not take part in the disaster of Cape Matapan, where her three sisters, Zara, Pola and Fiume were sunk at very close range by the Warspite. Gorizia did not survive the war, however. When German forces took her over, she was sunk by an attack from British and Italian frogmen. These ships were very fast at 32 knots and well armed with 8 x 8" guns. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Main Line Models 40 Foot Standard Reefer Santa Fe Scout Refrigerator Car - HO Scale Craftsman Kit, 1/87, PR-30
Wood and Metal Model Kit, Box Condition: Exc+
Sold
Very high quality wood and metal kit from the Golden Age of HO Craftsman kit. Builds a very accurate and highly detailed prototype of this car. Kit features pre-cut and pre-scribed hardwood sides that are factory painted and lettered, cut and pre-milled hardwood roof and floor, hardwood pre-cut and scribed car ends, wood and metal stock as required, numerous metal details and full instructions/plans. The kit has never been started. It has been inventoried complete with all parts and includes instructions.
Main Line Models 40' Wood Standard Refrigerator (Reefer) - Sante Fe Super Chief - HO Craftsman Kit, 1/87, PR-28
Wood and Metal Model Kit, Box Condition: VG
Sold
Very high quality wood and metal kit from the Golden Age of HO Craftsman kit. Builds a very accurate and highly detailed prototype of this Wooden Reefer. Kit features pre-cut and pre-scribed hardwood sides that are factory painted orange and decorated with white and black lettering for the Super Chief California, cut and pre-milled hardwood roof and floor, hardwood pre-cut and scribed car ends, wood and metal stock as required, metal ladders, reefer doors, ice hatches and other parts as needed metal grab irons, brake details and more. The model has never been started. The parts have been inventoried complete and includes full size plans/instructions. If you have an interest in these kits and the revolution they created in modeling, please read the article about their history located on this website. Please cut and paste this link in your browser to see it - http://www.oldmodelkits.com/blog/plastic-model-kit-history/the-ho-scale-model-railroading-revolution-of-the-1940s/
Revell HMS Ark Royal Aircraft Carrier and Ashanti Destroyer With White Engisn Super Detail PE Set, 1/720, H312
Plastic Model Kit, Box Condition: Good
Sold
Includes White Ensign WEMPE743 designed just for this kit. This is a large and incredibly well done brass fret with railings, guns, gun details, cranes, lattice antennas, nets, ladders, stairs and much, much more. Never used and complete with full instructions. The actual model is the 1973 issue and contains both ship models. They are very nicely detailed for that time, and each can be built as full hull or waterline. Never started. NOTE: Missing #108, a small rangefinder for the Ashanti. Otherwise inventoried with all other parts present and instructions present.
Wright-Dayton Co Grumman F4F -3 Wildcat Plywright Solid, 1/48, PW-1
Wood Model Kit, Box Condition: Good+
Sold
Very rare. From the very early 1940s. Wright-Dayton was located at Front & Second Strs, Dayton Ohio. The instructions state that this flying glider was 'designed by the chief engineer of the Wright-Dayton Company, who helped built and fly the original Wright Airplane." No small claim and not an idle one! Upon further investigation, the un-named chief engineer is James M.H. Jacobs. He filed the patent for this glider in 1937; he is also named in patents with Wilber Wright. Sure enough, he was an engineer who certainly worked closely with the Wright Brothers. This is a very nice, true-scale, deluxe (for the time) solid wood model of bread-and butter construction. Features 9 excellent, factory cut hardwood profiles for the bread-and-butter fuselage with dowel pin alignment, templates (on the instructions) for final sanding, very nice profile cut hardwood wings, horizontal and vertical stabilizers, die cut hardwood display stand, a factory sealed envelope of small parts, an excellent color insignia sheets with starts, wing walks, retracted wheels and gear doors, oil coolers, canopy with frames, tail wheel, side windows and stand name plate and excellent full size instructions with detail assembly drawings and excellent step-by-step instructions. Never started and complete with all parts and paperwork.
Wright-Dayton Co Wright Aerial Torpedo Flying Balsawood Glider
Wood Model Kit, Box Condition: VG
Sold
Rare. Exact date is unknown, but is from the late 1930s or early 1940s. Wright-Dayton was located at Front & Second Strs, Dayton Ohio. The instructions state that this flying glider was 'designed by the chief engineer of the Wright-Dayton Company, who helped built and fly the original Wright Airplane." No small claim and not an idle one! Upon further investigation, the un-named chief engineer is James M.H. Jacobs. He filed the patent for this glider in 1937; he is also named in patents with Wilber Wright. Sure enough, he was an engineer who certainly worked closely with the Wright Brothers. This is a rubber-band launched folding wing type model - when it slowed down near peak altitude, the wings would deploy and results in a long glide. It comes with a balsa body, factory attached red, white and blue tail feathers, metal nose weight (preinstalled) that has a launch hook, two balsa wings with excellent red printed design that says 'Wright Aerial Torpedo', factory applied tin folding tabs on the inboard wings, a rubber band/launch hardwood stick, full instructions and even the rubber bad (no good, but present, stuck to instructions). Complete and never used.
Eidai Cessna 172 Skyhawk - Hales Issue, 1/72, 005
Plastic Model Kit, Box Condition: Good-
Sold
Very crisply molded. Features very fine recessed panel lines, complete cockpit and passenger interior and full color decals. NOTE: this kit has been very neatly started. The cockpit floor, seats and instrument panel have been assembled. Also, the two fuselage halves are assembled. Quality of all assembly is 'excellent+.' There is no other assembly. Inventoried complete with all parts, decals and instructions.
Entex Tupolev Tu-144 SST, 1/144, 8457
Plastic Model Kit, Box Condition: VG
Sold
The worlds first supersonic transport. Measures 16 inches long when completed and has over 50 parts. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
RCM McDonnell XP-67 Moonbat, 1/48
Vacuform Model Kit, Box Condition: Bagged
Sold
SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.
Jo-Han Studebaker Lark Convertible, 1/25, CS-507
Plastic Model Kit, Box Condition: Good++
Sold
Rare. Nicely molded kit features full interior, top boot and molded in underside details. Molded in black, clear and red-tint clear, chrome plate and rubber tires with thin whitewalls. Never started. NOTE: one taillight lens is missing. The other is present as a pattern. Otherwise inventoried with all other parts. Instructions are printed on the reverse side of the box.
Jo-Han 1959 Dodge Custom Royal 2 Door Hardtop Promo, 1/25
Plastic Model Kit, Box Condition: Good++
Sold
In fantastic 'near mint' condition. Completely original and untouched. Completely straight- zero plastic warping. This is an early issue with four clear headlight covers (not the chromed ones). 100% complete with 'near mint' paint, 'near mint' original chrome, whitewall tires and working torsion bar suspension. It has not been cleaned. Will be shipped in a clear 1/25 scale car case with a gray base.
Maintrack Supermarine 508 - Bagged, 1/72, PX-015
Vacuform Model Kit, Box Condition: Sealed
Sold
Kit is still factory sealed. Bag has a tear at right, but all small metal parts are in an internally sealed bag and all other parts are present. Very high quality vac kit. Features excellent moldings, full decals for both airplanes and many metal details. Kit is of Type 529 VX136 or VX133. Initially designed as an undercarriage-less aircraft for use from the 'flexible deck' aircraft carrier being though of at the time. Interest was quickly lost in the flexible deck and the Admiralty ask for real landing gear. This was easily incorporated into the design, and the 508 was born. The aircraft has folding wings, an offset nosewheel, two very early 'Avon' engines and a unique variable incidence tail. Performance was good, and the 3rd prototype was given swept wings...which gave birth to the Scimitar fighter.
Revell Cruiser USS Olympia - Admiral Dewey's Flagship, 1/232, 85-5026
Plastic Model Kit, Box Condition: Exc
Sold
1999 reissue of the highly detailed original 'S' kits molds from the 1950s. has 304 parts and measures 17.75 inches long when assembled. The Olympia is still docked as a museum ship and was Flagship of Dewey and veteran of the Battle of Manila Bay. As with all Revell ship molds cut in the late 1950s, this model is a masterpiece of detail. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Yankee Modelworks U-35 WW1 German U-Boat, 1/350, YKM-350063
Resin Model Kit, Box Condition: Exc++
Sold
Rare. Very high quality resin full hull model kit with cast metal and PE details. The kit has never been started. It has been inventoried complete with all parts and includes instructions.
Lindberg Robert E. Lee Mississippi Steamboat - (ex-Pyro / ex-Life-Like), 1/163, 864
Plastic Model Kit, Box Condition: VG
Sold
Large and well detailed kit measuring 22 inches long when assembled. Reissued from quality ex-Pyro molds. Never started. Almost all parts are still sealed in factory bags. One bag was torn, so I inventoried those parts and they are complete. With colorful flag sheet and instructions.
Revell USS Forrestal CV59 Super Carrier With GMM PE Super Detail Set, 1/542, H339
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Includes the large and impressive Gold Medal Models Brass Photoetched set "1/540 Forrestal/Midway/Essex" detail set. It is mint, never used and includes full illustrated instructions. The actual kit is still factory sealed but the seal has splits on the bottom. This is the 1971 reissue of the famous 'S' kit. The box retains the "S" artwork but has pictures of other ships on the side. Full hull model with propeller and rudder detail, moving elevators, crane and antenna booms. Includes an airwing of 18 with helicopters, A3D Skywarriors, FJ Furys, F7U Cutlass and Banshee aircraft.
Hasegawa H8K2 Emily Flying Boat, 1/72, QP17
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Very large and nicely molded kit. Features rotating gun turret, optional position crew doors, working rudder, elevators, ailerons and flaps, good flight deck and engine detail, pilots, optional position engine maintenance stairs, beaching gear, torpedo and bomb load, rigging instructions and a 1/72 tow tractor with driver. There are markings for two different aircraft.
Revell Gemini Spacecraft, 1/24, 1835
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. Limited edition reissue from 1993 and from the same molds of the classic 1965 release. Large scale (1/24) kit features excellent detail for that time with full interior, detachable equipment module with internal details such as oxygen supply, fuel cells, batteries and electronics.