Life-Like Cutty Sark Clipper Ship - (ex-Pyro), B248-125
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. From the early 1970s and original Pyro molds. Full hull kit measures almost 10 inches long when assembled. Full hull kit with very good molded detail including wood planking and grain and copper plates below the waterline, pre-molded ratlines, detailed deck, billowing sails and display stand. Molded wood brown and off-white. A photo of the built kit on the instructions serves as a standing rigging diagram. This is one of the 'intermediate' line of Pyro ship kits, which at the time were Pyro called '$1.00 Models'. All were roughly the same size and were a significant increase in detail from the '50 Cent Models'.
Revell HMS Victory - Lord Nelson's Flagship, H363-298
Plastic Model Kit, Box Condition: Good+
Sold
NOTE: builder kit only; please read below. 1960 hardbox issue, possible the first issue. As with most all Revell early ship kits, the model is finely molded and very well detailed. Model is about 15 inches long when assembled. Features full detail on the top two decks, prefabricated rat lines, vac sails, full rigging material and instructions and display stand. Includes a like-new tube of Revell S Cement. The model has never been started. Inventoried 100% complete with all parts, flags and instructions. NOTE: the follow parts are cleanly broken. All parts are present, but will need to be repaired: #12 breastworks, #39 rail, #111 deadeye(2 arms), #109 deadeye and #90 mast base. Also, the right lower hull has a closed crack that is 1.5 inches long.
Bandai Jagdpanzer Hetzer 38(t) 75mm (Kfz 138) Pz Jag Wag 638/10, 1/48, 8239-250
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed. Rare kit that is part of the classic and highly detailed 1/48 Bandai Pin Point armor series. These kits are beautifully molded and feature full interior detail as well as flexible treads, many operating features and very detailed crew members that can be posed in almost any position.
Scale Flight Comet's Corben Super Ace - 16 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Scale Flight Spartan Executive (Fighter) - 20 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
Scale Flight AMCO's Curtiss A-3 Falcon - 16 inch Wingspan Dime Scale Flying Airplane, Dime
Wood Model Kit, Box Condition: NM
Sold
Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts and instructions.
AMT Star Wars Cantina Action Scene Diorama, 8205
Plastic Model Kit, Box Condition: VG
Sold
Still factory sealed. From 1998. Complete diorama contains 16.5 x 11 inch Cantina with full interior, over a dozen figures, and over 50 parts total. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Revell Mitsubishi J2M3 Raiden Japan Issue, 1/32, H288-700
Plastic Model Kit, Box Condition: VG++
Sold
Very rare 1971 Revell Japan hardbox issue with hardbox and unique box artwork. There are two Japan issues, and this is the first of the two. As with most Revell Japan issues, there are special features. This one includes a large, full color painting of the aircraft as well as decals for a total of 4 different aircraft - one from the 352nd, one this is not named and three from the 302nd. Paint guide is included for all four as well. Well detailed with full cockpit, complete engine detail with removable cowling, retracting landing gear and optional position canopy. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Frog Lockheed Ventura PV-1 Bomber/Reconnaissance, 1/72, F240
Plastic Model Kit, Box Condition: VG+
Sold
Very rare. Near the end, Frog had projected several future kits. In the case of the Ventura, the kit was never released but the molds were made. Around 40,000 boxes were made anticipating production. Most of the boxes were destroyed. A unknown number of decals sheets were produced. There are no instruction sheets reported. The mold was put in the machine and 100 test shots were run - the only Ventura run at Frog. The 100 test shots were not sold but some found their way into collectors hands. This example is in a 'very good+' box with four solid corners and light general wear. It contains the decals and all parts. It is molded in gloss dark blue and clear, which is correct for the test shots. The kit has never been started and is complete. Please note there are no instructions as none were ever made. Shipping insurance is required for this kit.
Revell John Travolta's 1979 Pontiac Firebird Fever, 1/25, 1387
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
1979 issue. Still factory sealed. Features 455 CID Pontiac engine, custom full interior with Reccaro seats, custom flared fenders, Racemark steering wheel, T-Roof with tinted panels, opening 'shaker' hood, 'Whale Tail' rear spoiler, custom instrument panel and custom Travolta decals.
MPC Indianapolis 500 Hall of Fame 1963 Watson Roadster / 1963 Lotus Ford / 1974 McLaren, 1/24, 6246
Plastic Model Kit, Box Condition: Good-
Sold
Rare kit from 1988 that contains all three models. All models features detailed engines and cockpits and full color decals. They have never been started. All parts (but the clear and tires) are still in the internal factory sealed bags. Includes decals and instructions.
Airfix Consolidated PBY-5A Catalina - 'Frisco-F' US Navy, 1/72, 50040
Plastic Model Kit, Box Condition: Good
Sold
US Airfix issue from 1979. Features full crew, cockpit, elevating gun and rotating turret, moving ailerons, elevator and rudder, opening and closing side blister windows, optional position landing gear, retracting floats and external depth charge load. Molded in dark blue and with markings for the aircraft on the box top. Never started. Inventoried complete with all parts, decals and instructions.
Revell Consolidated PBY-5 Catalina - Pre War High-Visibility Markings, 1/72, 4522
Plastic Model Kit, Box Condition: Good
Sold
From 1982. Features beaching gear for land operations, retractable wingtip floats and detailed engines with movable propellers. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Bluejacket Flying Cloud Clipper Ship Designed by Donald McKay - 37 Inches Long, 1/96, 1008
Wood and Metal Model Kit, Box Condition: VG
Sold
Museum quality craftsman kit. Features hardwood, kiln-dried, precarved hull, extensive high quality cast Britannia fittings and other hardwood and metal parts as required. Includes many sheets of very detailed, full-size plans and an illustrated instructions book (25 pages long). The kit has never been started. The parts that were never factory sealed (hull, wood and metal stock) have been inventoried complete and are still wrapped in the original factory packing paper. All of the fittings are still in factory sealed bags in the factory box.
Revell USS Fletcher Destroyer - With Hull Numbers for Any Fletcher Class DD, 1/306, 85-3021
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed. Large scale, full-hull kit from older molds. Includes enough white hull numbers that you could build any of the similar Fletcher class destroyers.
Walthers Walthers Cornerstone 933-3190 Art Deco Highway Bridge / 933-3196 Arched Road Bridge / 933-3181 Cinder Conveyor and Ash Pit HO Scale, HO
Plastic Model Kit, Box Condition: Good+
Sold
Includes all three kits for one price. None of the kits have been started. The have been inventoried with all plastic parts and instructions present. NOTE: the Art Deco underpass is missing the paper signs.
Tamiya M2 Bradley Infantry Fighting Vehicle, 1/35, 35131
Plastic Model Kit, Box Condition: Sealed Exc++
Sold
Still factory sealed. Very highly detailed kit with full interior, commander figure, movable turret, nylon mesh for vane detail, raised or stowed TOW missile launcher and more.
ICM Yak-7A WWII Soviet Fighter With Extratech PE Detail Set - 12 GIAP 6 IAK Moscow Air Defense Zone 1942 / Khabarovsk Spring 1942 #9 / Khabarovsk Spring 1942 #7 / Kalininsky Front Spring 1942, 1/48, 48031
Plastic Model Kit, Box Condition: Good+
Sold
Includes Extratech 1/48 Yak-7A Photoetched Detail Set for this kit. Includes many external and interior parts as well as film instruments and instructions. Never used and complete. The actual model is nicely detailed and molded. Features all fine recessed panel lines, well detailed engine and cockpit, separately molded ailerons and rudder and paint guide/decals for four aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
AMT Star Wars Star Destroyer With Fibre Optic Lighting System, 8782
Plastic Model Kit, Box Condition: Good++
Sold
From 1995. Large and well detailed 15" long model with a special fiber optic lighting system consisting of over 2000" of optic filament, 14 light sources, 6 volt power source, micro-drill with bit, power source jack and wiring and chrome reflective strips. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
ESCI A-4E Skyhawk - US Navy, 1/48, 4084
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but the seal has split. Very nicely molded kit with almost all recessed panel lines and a few raised ones. Features detailed cockpit and gear wells, two drop tanks, 8 Mk82 Slick bombs, two rocket launchers and more.