Plastic Model Kit, Box Condition: Good
$32
Very highly detailed model that is superbly molded with all very fine recessed panel lines. Features parts for either version (including detailed cameras for the B-2b), highly detailed cockpit, detailed gear wells, photoetched parts and bomb load for B-2 variants. Has decals for the three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$27
Still factory sealed. Limited issue kit features all fine recessed panel lines, photoetched details, 'very good' cockpit detail and more.
Plastic Model Kit, Box Condition: Sealed Mint
$27
Still factory sealed. Excellent kit from all new molds featuring many pieces and some photoetched details.
Plastic Model Kit, Box Condition: Exc
$34
Highly detailed injection molded kit with many photoetched parts, resin engine & super-detailed cockpit. Includes paint guide and decals for the aircraft noted. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Exc
$35
Hard-to-find in-line engine version of the normally radial-engined IAR-80. This is an excelltn model which features main airframe parts in professional-grade castings, numerous photoetched parts, cast metal landing gear struts, excellent full cockpit, film instruments, detailed gear wells and more. Includes painting guide and full decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Sealed NM
$44
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Plastic Model Kit, Box Condition: Good+
$79
From the 1970s and from high quality Nitto / Entex molds. This big scale model with excellent detail for that time and features recessed panel lines, good cockpit and inner engine details, optional clear engine nacelles as well as an optional clear cockpit section to show the detailed flight deck. There are parts to build the AWACS or Presidential versions and a very large and color decal sheet for both. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$84
Still factory sealed and the rare original issue from the 1970s; not a recent reissue. Super detailed truck with over 250 pieces features full rolling chassis build up just like the actual vehicle, full suspension and driveline, supercharged V8 Detroit Diesel Engine, tilting sleeper cab, single or dual exhaust system, complete interior, many chrome plated parts, hollow vinyl truck tires and much more.
Resin Model Kit, Box Condition: Sealed Exc
$56
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Multimedia Model Kit, Box Condition: Good
$38
Nicely detailed kit that features fine recessed panel lines, highly detailed cockpit, many resin & photoetched details and more. NOTE: this kit has very minor and 'professional' quality assembly as follows: the PE seat is assembled (1 piece). There is no there is no other assembly. The seat, several other PE parts and three resin parts are airbrush painted. There is no other painting. Inventoried 100% complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good-
$59
1969 issue of this very popular model. The Panzer IV mounted one 75mm gun and two MG24 machine guns. The 'H' variant depicted here had extra armor plates hung loosely from the sides to pre-detonate hollow charge projectiles. The kit can be built with or without this additional armor. Features rotating turret and elevating gun, detailed moving flexible treads, spring action bogeys, opening Cupola lid, extra hull-mounted spare tread links, jerry cans, two crew figures and more. Never started. It has been inventoried and NOTE: missing three spare track sections: I have included an extra Monogram Panzer IV flexible track, which has more than enough length to make these parts (and many more spare tracks if you wish). Otherwise includes all other parts and includes decals and instructions. Please note that one small decal is cut from the sheet but it is present. I have placed it in a small ziplock bag for safety.
Plastic Model Kit, Box Condition: Good++
$36
Hard-to-find and the same kit as the Testors issues; the molds originated with Italeri. Finely molded and detailed featuring 210 parts, rotating turret, elevating gun, elevating and rotating .50 caliber machine gun, flexible tracks, detailed suspension, shovels, axes, crowbars, fuel cans, grab handles, radio antennas, tow hooks, tarp roll and decals & paint guide for five different tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: instructions are high quality, full size photocopies. The original instructions are missing.
Plastic Model Kit, Box Condition: VG
$62
Rare and unusual large-scale Yak-28 ECM variant that is from all new molds; it is well molded and highly detailed inside and out with 246 pieces. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Wood Model Kit, Box Condition: Exc
$62
Built for 'Sniffing Thermals', the honored pastime of a generation of model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and early gas powered models, all powered by Brown engines, took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) models could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all without any operator inputs once the airplane took off. Getting the wing up out of the propeller airflow was a huge improvement, and this type of design proliferated. This is one example of a parasol (with a clever cabin) style 1940s free-flight competition aircraft designed by Wally Simmers. This quality kit includes die-cut printwood, strip wood, fully finished wheels, fully formed wire landing gear struts, die-cut clear windshield, covering tissue and beautiful full size plans. The model has not been started. Inventoried 100% complete with all parts and paperwork present. Please note that while no work has been done, some parts are neatly (adult) punched out, mainly wing ribs.
Plastic Model Kit, Box Condition: NM
$36
This model is very highly detailed and finely molded. The kit has never been started. The parts are still in the internal factory sealed bags and includes and instructions. Also includes a very fine and tiny cast metal submarine model as well, possible related with a war memorial which is shown on a large, full color card and map sealed with the tiny submarine.
Plastic Model Kit, Box Condition: VG
$24
Nice small scale model from Japanese molds of unknown origin. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
Resin Model Kit, Box Condition: Exc
$62
Very rare and out of production. Full and complete kit made in Scotland by Accurate Armour. This is a highly detailed model from high-definition cast resin, metal and PE parts with stowage, opening hatches and more. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Resin Model Kit, Box Condition: Sealed Exc
$42
Still factory sealed. Limited edition high definition cast resin kit. Features fine recessed panel lines, good cockpit detail and full decals.
Plastic Model Kit, Box Condition: Sealed Exc
$37
SALE!! Still factory sealed. Very well molded and features detailed interior and exterior, crew member and separately molded track links.
Plastic Model Kit, Box Condition: VG+
$37
Limited release injection-molded plastic model that includes both aircraft and the connection 'trapeze' shown as well as the rocket-assisted ground trolley in the box art. Features fine recessed panel detail, film instruments, many photoetched parts, detailed cockpit and more. Never started and inventoried complete with all parts and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239