Scale Models 1928 Ford Model A Town Sedan - (ex Hubley), 1/20, 4007
Metal and Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. One of a series of popular and desirable metal and plastic kits from ex-Hubley. The metal castings are very well done and detailed. Features cast metal body, frame, hood, engine, suspension and more, many injection molded parts including wire wheels and interior seats. Includes real rubber tires. Features steering front wheels, full rolling chassis with engine, exhaust, suspension and driveline just like the real car, removable hood, complete interior, aft trunk (luggage) and more. Kit likely dates from the 1980s.
KMP Models Spar Tree With Boom Loader or Yarder or Combination - HO Scale Craftsman Model, 1/87
Wood and Metal Model Kit, Box Condition: Exc++
Sold
Superb, high quality model that lists three building options in the instructions. Features hardwood lumber, custom white metal castings and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes extensive instructions and detailed plans.
KMP Models Willamette Loader Steam Donkey - HO Scale Craftsman Model, 1/87
Wood and Metal Model Kit, Box Condition: Mint
Sold
An excellent model with Northeastern scale hardwood lumber, custom white metal castings, Grandt & Campbell detail and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Aurora Temco TT-1 Jet Trainer, 1/43, 139-98
Plastic Model Kit, Box Condition: VG
Sold
Dated 1962. This is the nice ex-Strombecker kit reissued after Aurora bought the molds when Strombecker ceased model production. Molded in yellow and clear plastic with the clear triangular 'world' stand. Inventoried 100% complete with all parts, decals and instructions. NOTE: the box displays much better than the 'very good' grade but it ranked as such because the right side panel is faded. Also, there is red marker on the instructions where someone underlined each part as they did an inventory of the parts.
Lindberg Hawker Hunter With Tow Tractor - RAF / Swiss / Peruvian Air Forces, 1/48, 536-100
Plastic Model Kit, Box Condition: Good+
Sold
Late 1950s hardbox issue and great Ray Gaedke artwork. Includes markings for all three air forces and is absolutely loaded with operating features. Has removable rear fuselage, complete removable jet engine, moving rudder, elevator and ailerons, retracting landing gear, cockpit detail, ejecting pilot, loadout with drop tanks and rockets, tow bar, tractor with driver and display stand. Molded in white and clear with the yellow tow tractor. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: the instructions have adult building notes neatly written on them.
Lindberg Dodge Little Red Wagon A100 - Builds Stock or Race Truck, 1/25, 72158
Plastic Model Kit, Box Condition: VG++
Sold
Nicely done kit that can be built as a stock A100 delivery or work truck or the world-famous race vehicle. Features full frame construction like the real truck, detailed suspension and driveline, full interior, opening hinged doors, two fully detailed engines (Dodge 273 V-8 and Hemi-Head racing 426 CID), opening and closing tailgate and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell 1980s Ford Mustang Cabrio Convertible, 1/25, 7324
Plastic Model Kit, Box Condition: Good
Sold
1982 issue. Features detailed engine and compartment, removable hood, full interior, optional top and top boot, decals and more. Molded in red &clear and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Campbell Deck Timber Bridge - HO Scale Craftsman Kit, 1/87, 761-725
Multimedia Model Kit, Box Condition: VG
Sold
Excellent model featuring very extensive factory precut wood, other wooden details and other materials as well. The kit has never been started. The parts that were factory sealed are still factory sealed; the ones that were never sealed have been inventoried complete. With instructions and excellent full size plans.
The Building and Structure Co Building #1 The Yard Office - HO Scale Craftsman - Bagged, 1/87, 2050
Wood Model Kit, Box Condition: Sealed
Sold
Still factory sealed. Excellent all laser cut wooden kit. With full instructions.
Goldline Products Hermosa Creek Bridge - HO Scale Craftsman - Bagged, 1/87, GL-100
Wood Model Kit, Box Condition: Sealed
Sold
Still factory sealed. Beautiful craftsman style kit of this D&RG Howe Truss type bridge built around 1881 at mile post 452.4 just north of Durango, Colorado. The kit is designed to NMRA standards. Although shown as a 3 foot bridge, it can be used for 2 or 2.5 foot gauge also if you center the central stringers below the rails; no other changes are necessary.
Laser Structures Ltd McCabe Lumber Co. Backwoods Engine House - Craftsman HO Scale - Bagged, 1/87, 1450
Wood and Metal Model Kit, Box Condition: Sealed
Sold
Still factory sealed. Very well detailed laser kit it with metal accessories. Master Creations invented laser-cut, tabbed construction and they certainly do a fine job of it.
Fine Scale Miniatures Old Time Sawmill - (Saw Mill) - HO Scale Craftsman Model, 1/87, 170
Wood and Metal Model Kit, Box Condition: VG++
Sold
Very rare and extremely detailed. Includes all hardwood building parts that are cut to length and shaped if needed, as well as a large box with dozens and dozens of cast metal fittings. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions and plans.
Aurora Beechcraft Super 18, 1/88, 284
Plastic Model Kit, Box Condition: Good-
Sold
Rare Holland issue with unique box art. Ex-Comet molds smaller scale (1/88) issue. Features rotating props, full side and cockpit glass, and blue and red pinstripe decals with N numbers and rudder fin flash markings. Molded in very bright yellow. Never started. Inventoried 100% complete with all parts, decals and instructions.
Ambroid NKP Nickel Plate Road / NYC & STL NKP 50 Ton Composite Open Hopper - HO Craftsman Kit, 1/87, H-12
Wood and Metal Model Kit, Box Condition: Exc
Sold
High quality Ambroid kit from the 'Golden Age' of HO models. The limited-issue Ambroid kits are widely considered to be among the finest Craftsman kits issued. They can be built to a museum-quality display or used on your layout. The kit is made from quality Northeastern Scale Lumber and features all pre-scribed and milled hardwood parts, milled detail parts as needed, wood and metal stock, an envelope of detail parts, extensive decals and full instructions and plans. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. If you have an interest in these highly accurate kits and the revolution they created in modeling, please read the article about their history located on this website.
Funaro & Camerlengo 40' Wood Milk Car (Reefer- Refrigerator Car) - Central Vermont - Resin HO Craftsman Kit, 1/87, 6730
Multimedia Model Kit, Box Condition: VG++
Sold
Very highly detailed modern craftsman kit. The main parts are cast from high definition resin, which is superior in detail to injection moldings. Smaller details are resin, plastic and metal as required. Includes detailed instructions and plans as well as extensive decals for Central Vermont. The kit has never been started. Internal factory sealed bags and the parts that were not bagged have been inventoried complete including decals and instructions.
Funaro & Camerlengo 40' Outside Braced Wood Automobile Boxcar Grand Trunk - Sliding Door with Auto End Door- Resin HO Craftsman Kit, 1/87, 6650
Multimedia Model Kit, Box Condition: Exc
Sold
Still factory sealed. Very highly detailed modern craftsman kit. The main parts are cast from high definition resin, which is superior in detail to injection moldings. Smaller details are resin, plastic and metal as required. Includes detailed instructions and plans as well as decals for Grand Trunk.
AMT 1975 Laguna Stock Car - (Chevrolet Laguna Model King Issue), 1/25, 21836P
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Dated 2008. Features detailed race chassis and cockpit, complete engine and engine compartment, life-off body, two decal sheets for multiple cars and more.
AMT 1966 Buick Riviera GS Grand Sport - Stock or Custom, 1/25, 6556-200
Plastic Model Kit, Box Condition: Good+
Sold
Rare original issue and even rarer in this condition - complete and never started. Includes the unique large clear display stand. Nicely detailed kit of the first year of the second generation Riviera. This is the GS package with the 2x4 carbs, large air cleaner and side badges. Features detailed engine and engine compartment, opening hood, molded underside detail, full interior, numerous custom option parts with unique front and rear end treatments and more. Molded in white, chrome, clear, red-tinted clear and with real rubber narrow whitewall tires. The kit has never beens started. Inventoried complete with all parts, decals, special AMT upholstery material and instructions.
AMT 1960 Ford Edsel Ranger Convertible 3 in 1 Kit, 1/25, 22260
Plastic Model Kit, Box Condition: VG
Sold
Very rare and never reissued. Nicely molded and detailed kit that can be built three ways - stock, show or track. Features full interior, optional continental kit, top boot and the following custom parts - lowering blocks, custom or stock hubcaps, tachometer, floor shift, oil and ammeter gauge, lake pipes, spinners, exhaust extensions, aerials, custom tail lights and fender skirts, louvers, fender mirrors, spotlights, custom grill bars, roll bar and decals. Molded in ivory white, clear, red-tint clear, chrome and with black rubber whitewall tires, correct thick metal axles and metal chassis screws. Chrome and windshield are excellent for this model. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
MPC 1977 Pinto Wagon - Stock Station Wagon / Custom/Mini-Van Version / Panel Van, 1/25, 1-7728
Plastic Model Kit, Box Condition: VG
Sold
Hard-to-find kit and ever rarer in this condition. Comes with parts to build one of any of the three versions listed. Features stock 4 cylinder or custom V8 engines, opening hood, detailed underside with separately molded single or dual exhausts, the infamous gas tank and suspension, full stock or custom interiors, CB Radio gear and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. Never started. All the parts that were factory sealed are still sealed; the parts that were not (clear and chrome) have been inventoried complete. With instructions and decals.