IMC 1946 / 1947 / 1948 Ford Convertible, 1/25, 105-200
Plastic Model Kit, Box Condition: VG
$49
This 1970s model is very well detailed and includes parts to build any one of the three years listed. Features opening hood, opening doors, steerable wheels, hinged front seats, super detailed chassis with suspension and exhaust, stock convertible top or boot, detailed engine, complete interior, optional 427 engine, chopped top, fender skirts and more. Molded in light yellow, clear, red-tinted clear, chrome and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals, white wall stickers, pre-cut adhesive metal side trim and instructions.
AMT 1966 Ford Mustang - 2 Door Hardtop Coupe 3 in 1 Kit - Stock / Custom / Drag, 1/25, 6526
Plastic Model Kit, Box Condition: VG++
$32
This 1989 issue is very well molded and can be built as factory stock, drag racer or street custom. Features over 95 pieces, detailed engine and engine compartment, removable hood, detailed chassis, optional tires, full interior and much more. Never started. The parts that were factory sealed are still in the factory sealed bag. The parts that were never factory sealed (chrome & clear) have been inventoried complete. Includes decals and instructions.
AMT 1953 Chevrolet Corvette Roadster - Stock Or Custom, 1/25, T310
Plastic Model Kit, Box Condition: Sealed Exc
$26
Still factory sealed and an original 'T' issue from the 1907s. Very cleanly molded & detailed and features parts to build stock or custom versions, rolling chassis construction like the real car, full front & rear suspension, drive line and differential, complete Blue Flame 6 engine with three side mount carbs, Powerglide transmission, full interior, opening hood, removable top, and custom features: special grille and road lamps, headlight fillers, Kelsey 20 Spoke Wheels, wide low profile tires, custom valve cover, custom steering wheel and more. Usually molded in white, chrome and clear with real rubber tires.
AMT 1955 Chevrolet Nomad 3 in 1 - Stock Wagon / Drag Wagon / Custom Pickup Truck, 1/25, 6592
Plastic Model Kit, Box Condition: Sealed Good
$26
Still factory sealed and from the 1980s. Very well molded and detailed with over 130 parts. Features detailed engine, engine compartment and opening hood, stock chassis with separately molded front and rear suspension and driveline, optional racing suspension, steerable wheels, complete stock and custom interiors, opening upper and lower tailgates, optional moon gas tank, hood scoops, pick up truck version with optional top and bed rails and more. Molded in colored plastic, clear, chrome and with rubber tires.
AMT 1959 Chevrolet Corvette - Stock or Custom, 1/25, T393
Plastic Model Kit, Box Condition: VG+
$30
1970s T issue that can built one of two ways. Features detailed engine compartment and opening hood, full interior, detailed molded chassis, numerous custom parts and more. Never started. The parts that were factory sealed are still in the factory sealed bag. The parts that were never factory sealed (chrome & clear) have been inventoried complete. Includes decals and instructions.
AMT 1937 Chevrolet Convertible - Stock or Street Rod, 1/25, T141
Plastic Model Kit, Box Condition: Sealed Good++
$46
Still factory sealed and an original "T" issue from the early 1970s. The model can be built any one of two ways. Includes extensive customizing and street parts. Features detailed engine and engine compartment, opening hood, detailed underside, complete interior and much more.
AMT 1923 Ford T Depot Hack - Or Express Wagon, 1/25, T142
Plastic Model Kit, Box Condition: Sealed Exc
$39
Still factory sealed. This is the rare original issue from the late 1960/early 70s and not a common reissue. This model features parts for both Depot Hack and Express Wagon versions, rolling chassis frame build-up just like the actual truck, detailed engine, full interior and more.
AMT 1957 Ford Thunderbird Hardtop Convertible - Custom or Stock, 1/25, 6516
Plastic Model Kit, Box Condition: Sealed Mint
$25
Still factory sealed. 1980s issue features over 86 pieces, parts for either version listed, detailed V8 engine and engine compartment, opening hood, detailed interior, optional fender skirts, optional spare wheel cover & continental kit, optional tops and more.
AMT 1941 Plymouth Model P-12 Four Passenger Coupe, 1/25, T148
Plastic Model Kit, Box Condition: Sealed Exc
$44
Still factory sealed. This is an early "T" issue from the 1970s. The model features opening hood, detailed engine and compartment, full interior, underside detailing and much more. Usually molded in white, chrome, clear and with rubber tires.
AMT 1966 Ford Mustang - 2 Door Hardtop Coupe 3 in 1 Kit - Stock / Custom / Drag, 1/25, 6526
Plastic Model Kit, Box Condition: Sealed NM
$32
Still factory sealed. This 1986 issue is very well molded and can be built as factory stock, drag racer or street custom. Features over 95 pieces, detailed engine and engine compartment, removable hood, detailed chassis, optional tires, full interior and much more.
Trumpeter American LaFrance Eagle Fire Pumper, 1/25, 02506
Plastic Model Kit, Box Condition: Exc
$62
A superb model featuring 326 pieces, a big fret of many PE details, rolling chassis build up just like the actual truck, full engine, complete front and rear suspension, driveline, exhaust, fuel tank, complete interior and more. Molded in white, clear, chrome plate and with rubber tires. Includes a large decal sheet for the box top truck and also enough letters and numbers to create almost any markings you can imagine. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Jo-Han 1956 Plymouth Belvedere Front Bumper / Rear Bumper / Four Wheels - Promo - Bagged, 1/25
Plastic Model Kit, Box Condition: Exc
$18
Includes the chrome plated parts shown in the photo. The chrome plating is in 'near mint' condition with only very slight and small flaws. These are from the original Jo-Han molds but are likely reproductions made in the 1990s. They came with a collection of promo bodies, windshields and chrome parts. I am 99% sure that these parts will also work on the Jo-Han model kit (and not just the promo).
Jo-Han 1959 Dodge Custom Royal Front Bumper / Rear Bumper / Four Wheels - Promo - Bagged, 1/25
Plastic Model Kit, Box Condition: Exc
$18
Includes the six chrome plated parts shown in the photo. The chrome plating is in 'near mint' condition with only very slight and small flaws. These are from the original Jo-Han molds but are likely reproductions made in the 1990s. They came with a collection of 1990s promo bodies, windshields and chrome parts. I am 99% sure that these parts will also work on the Jo-Han model kit (and not just the promo).
MPC 1932 Chrysler Imperial Le Baron Convertible Sedan, 1/25, 1-3153
Plastic Model Kit, Box Condition: Sealed NM
$49
Still factory sealed. Well detailed classic kit of one of the more elegant 1930s automobiles. Features full rolling chassis build up like the real car, optional boot and convertible tops, rubber tires with whitewall inserts, side mounted spares, full interior, numerous plated parts, steerable front wheels, opening trunk and detailed flathead straight 8 engine with removable hood.
Revell 1999 Ford Mustang Cobra Hardtop, 1/25, 85-2535
Plastic Model Kit, Box Condition: Sealed VG+
$22
Still factory sealed and from 1998/99. Features 109 pieces, detailed engine and compartment, removable hood, independent suspension, full interior and much more. Usually molded in white, red-tinted clear, clear, chrome plate and with rubber tires and decals.
Revell Dream Car Bumpers and Grilles, 1/25, C1152
Plastic Model Kit, Box Condition: VG
$25
Rare. Narrow-box issue of the 'Custom Car Parts' from the early to mid 1960. All parts are chrome plated and the instructions are on the reverse of the card. Never used and inventoried 100% complete. There is also an unboxed issue with the same part number and kit name, mounted on a cardboard blister-pack.
Revell Custom Car Bumpers And Grilles, 1/25, C1154
Plastic Model Kit, Box Condition: VG
$24
Rare. This is the narrow box version of the early 1960s 'Custom Car Parts' Bumpers and Grills. All parts are chrome plated and the instructions are on the reverse of the card. Never started. It has been inventoried complete with all parts. The other issue was the same part number and title but packed in a card with a clear plastic blister-pack. Although these are not dated, I believe the blister-pack/card version to be the later issue.
MPC Pontiac Fiero, 1/25, 1-0715
Plastic Model Kit, Box Condition: Good
$58
1984 issue that can be built factory stock or custom. Features choice of stock or custom engines, detailed engine compartment and opening trunk, excellent suspension and exhaust, complete interior, opened or closed sunroof, spare tire and opening hood, numerous custom parts such as fender flares, spoiler, front air dam and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The chrome and clear parts were never factory sealed and have been inventoried complete including decals and instructions.
MPC David Pearson NASCAR Pontiac GTO With Clear See-Through Body, 1/25, 1-1706-225
Plastic Model Kit, Box Condition: Good
$58
Dated 1977. NOTE: builder only or for parts, please read carefully. Hard-to-find and nicely detailed. Features full racing frame, removable body, detailed engine, opening hood, authentic decals and more. Inventoried complete with all parts, decals and instructions present. NOTE: this kit has been started. The following are glued to the body: front & rear windshield, rear window straps, hood, spoiler and front roll pan. Quality of assembly is POOR/UGLY because the glue is smeared.
AMT 1956 Ford Hardtop - 3 in 1 - Stock / Custom / Racing, 1/25, T271
Plastic Model Kit, Box Condition: Exc+
$64
Original 1960s issue and rare in this condition. This is a very highly detailed kit with over 170 parts. Features a stock Ford V-8 and a racing/custom version, detailed underside with suspension and driveline details, optional tires, stock wheels or mag spoke or reversed rims, lowering blocks, complete stock interior, custom interior with bucket seats, console, Eelco shift lever, accessory gauges and seat belts, detailed engine compartment, opening hood, opening doors, stock exterior trim, custom trim with different side pipes, Lake Pipe shrouds, sunken aerial, custom tail lights, rear roll pan and grill insert, custom front grill, hood ornament and headlight shrouds and more. The kit has never been started. Inside, it is exactly as it left the factory. The white parts are still sealed in the factory bag; all other parts were never factory sealed and have been inventoried complete. The decals and instructions are in remarkable 'near mint' condition.