Airfix Boeing 314 Pan Am Clipper - Dixie or BOAC Berwick, 1/144, 04172-6
Plastic Model Kit, Box Condition: Good++
$39
Very nicely molded and detailed kit that includes decals for both aircraft. Never started and inventoried 100% complete with all parts, decals and instructions present. In the 1930s Pan Am was a household word in the USA for their romantic foreign routes and the glamorous 'China Clippers' that crossed the Pacific Ocean, stopping at such ports as Wake Island. Pan Am's attention soon turned to the Atlantic. Since non-stop service would be needed, a new aircraft was designed. The Boeing 314 was chosen. This huge flying boat started flying the Atlantic mail in 1939 with a trip over 26 hours long. Before the war, the 314 fleet flew the Pacific, Atlantic and other routes. The airliner was a palace compared to the cramped jets and limited service of today. The flight deck compared to the bridge of a ship and housed 6 crew. It was connected to the passenger cabin by a spiral staircase. The luxurious cabins were divided into 5 standard compartments, each seating 10 passengers, a dining salon for 14, a special compartment for four and a deluxe bridal suite. 74 could be carried on day trips and 40 when sleeping quarters for all passengers was required. Chefs prepared gourmet meals while passengers lounged in deeply cushioned wicker chairs and enjoyed a grand view of the scenery from about 5,000 feet. The age of the Clippers ended shortly after WWII when land planes could operate at much higher speeds than the flying boats.
ESCI NATO Pilots And Ground Crew - 48 Figures, 1/72, 243
Plastic Model Kit, Box Condition: Exc
$12
Ideal for 1/72 dioramas. Includes 48 NATO figures and a large, full color painting guide (on the back of the box) for both pilots and ground crew. Never started and inventoried complete.
Monogram Sopwith Camel - (ex Aurora), 1/48, 5204
Plastic Model Kit, Box Condition: Sealed NM
$38
Still factory sealed. When Monogram bought the Aurora molds in the mid 1970s, they later reissued the kits that were the most accurate; this one is from 1979. Since Aurora had recently reworked the molds on the Camel, this was a natural choice as it builds up a very nice kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Heller 1928 BMW DIXI - Roadster, 1/24, 700
Plastic Model Kit, Box Condition: Good+
$44
Very nicely molded with 80 parts and features full engine detail, very fine spoked chrome wheels, full front and rear suspension and driveline detail, positionable front wheels, complete interior, optional top, optional position doors (opened or closed) and more. Molded in white, chrome, clear and with rubber tires. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Das Werk WWI German U-Boat SM U-9 With RC Subs Aftermarket Details (2 Sets) / Das Werks Bridge Crew / Deck Crew - Includes Decals For All 4 Ships (U-9 / U-10 / U-11 / U-12) Of This Class, 1/72, DW72001
Plastic Model Kit, Box Condition: Exc++
$180
Build the ultimate large-scale U-9 with the Das Werks model and the following factory-sealed Aftermarket Details: RC Subs 092 PE Details Set (which is identical to the Das Werks PE Details Aftermarket Set), RC Subs 093 3D Printed Chimney Shaft, Das Werks DWF012 1/72 WWI German Submarine Deck Crew and Das Werks DWF011 WWI German Submarine Bridge Crew. The actual kit is from all new, state of the art molds. Measurements and details were taken directly from the only surviving (but sunk) ship of the U-9 Class by Das Werke divings teams. As a result, this model is accurate in shape and dimensions. Features full hull, highly detailed surfaces and rivets, with the rivets offset to reflect the hand-riveted construction, optional sail railings, opened or closed hatches and torpedo doors, optional upper rudders, optional position masts, stowed or extended exhaust stacks, turnbuckles for accurate rigging and more. Never started and all of the parts are still in the internal factory sealed bags and includes decals and instructions.
Academy USMC F/A-18D Special Edition With Numerous Aftermarket Details - VMFA(AW)-242 Bats, 1/32, 12118
Plastic Model Kit, Box Condition: Exc++
$420
Build the ultimate 1/32 F/A-18D with this very rare and superb Academy kit and $388 of accessories! Includes the following never used and factory sealed or inventoried complete aftermarket detail sets: Eduard BIG3203 PE Set: 32105 Exhaust, 32106 Exterior, 32107 Armament, 32111 Mesh Set, 32501 Remove Before Flight, 32508 Placards, 32510 C Interior, 32519 C Ejection Seat, JX003 C Masking, XL516 etch Stencil Data Mask , Eduard 32298 Ladder - PE, Eduard 32556 Interior - PE, SAC 32021 Landing Gear (Landing Gear and Tires Included In Kit), Aires Hobby Models 2037 Closed Exhaust Nozzles, Aires Hobby Models 2038 Wheel Bays, Verlinden 2023 Ejection Seats, Red Fox Studio RFSQS-32111 Early Hornet Instrument Panel , Black Box Combat Series CS 32031 Cockpit Set Two Seater, Wolfpack WPD32078 C/F (Chaff) Dispenser Set, Steel Beach SBA33021 Slime Lights , Steel Beach SBA32013 Intake Covers, Rhino Modelworks RM32004 Seamless Intakes , North Star Models NS 32003 AGM65 Maverick LAU-117 Launcher and Trumpeter 03302 U.S. Aircraft Weapons: A. The actual model is by far the most accurate kit of the F/A-18D. Features all fine recessed panel lines and superb detail inside and out. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Tamiya Lockheed Martin F-35A LIghtning II With Numerous Aftermarket Detail Sets, 1/48, 61124
Plastic Model Kit, Box Condition: Exc
$159
Build the ultimate 1/48 F-35 with this Tamiya model and $265 of accessories! Includes the following never used and factory sealed or inventoried complete aftermarket detail sets: Eduard Big49186 PE Set: 49103 Remove Before Flight, 49864 Int & Ext, EX567 Mask, FE865 Seatbelts, Eduard Brassin 648100 Armament: 648087 x 2, 648155, 648435, 648506, 648562,New Ware NWAM1038 F-35A Lightning II EXPERT Kabuki Masks, New Ware NWAM1039 F-35A Lightning II RAM PANELS Kabuki Masks, Red Fox Studio RFSQS-48058 Quick Set 3D Acrylic Instrument Panel, Kits World Decals KW3D1482021 Ejection Seat Belts, Straps, Handles, Detail & Wonder 480612 Landing Gear, UpWind U-48039 Metal Landing Gear, Squadron True Details True Details Accessories F-35A Lightning II Wheel Set and Dream Model DM 2031 Lockheed Martin F-35A/C Lightning II Exhaust Nozzles Detail Set. The actual kit is beautifully molded and details. Never started. The small parts are still in the internal factory sealed bags; the few large parts are not sealed and inventoried complete. Includes decals and instructions.
Revell US Army Tactical Missiles Little John and Dart with Launchers - 'S' Issue, 1/40, H1812-98
Plastic Model Kit, Box Condition: Exc
$110
First issue from 1958. Little John was a light-weight free-flight rocket that was highly mobile. It could be pulled on its launcher or transported by helicopter. Length was 12 feet long and the warhead was atomic. The Dart was a very early, five foot long wire-guided anti-tank missile with a solid propellant rocket motor. An optical rangefinder was used for guidance. Both models are well detailed. The Dart includes four missiles, one launcher, three stands, decals, one optical guidance unit and a crew of three. The Little John includes a detailed launcher with elevating rails, movable support legs, decals and crew of three. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The box actually displays significantly better than the 'excellent' rating but is graded as such because there is a very small tear on the lower right corner on the short side and a small 1/2" x 1/4" tape tear on the lower long side.
Revell Kenworth W900 Wrecker Plus Moebius Chrome Wheel And Tire Set - Tractor Semi Truck, 1/24, 85-2510
Plastic Model Kit, Box Condition: VG+
$179
Very Rare. This 2015 issue features 411 pieces, detailed engine and engine compartment, opening hood, complete cab detail, full underside suspension, exhaust & chassis detail, rubber tires, detailed crane structure with 3 step movable jib, accurate reproduction of all signaling and warning lights, rope and metal chains and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell North Cormorant Off-Shore Oil Rig, 1/200, 08803
Plastic Model Kit, Box Condition: Exc
$145
Very rare and from 2004. Very large and detailed with 615 pieces and features waterline main structure with well detailed substructures, container units with internal fittings, detailed derrick, loading crane with movable boom, detailed structural walls, flare masts, lifeboats, helicopter landing platform, 40 drill strings, railings, detailed catwalks with steps and full decals. Molded in multiple colors to match the boxtop artwork. The kit has never beens started. All parts but the railings are still in factory sealed bags. The railings are not sealed (one tree only) and have been inventoried with all parts present along with decals and instructions.
Revell Bucket Wheel Excavator Schaufelradbagger 289 O&K, 1/200, 08813
Plastic Model Kit, Box Condition: VG++
$125
Incredibly well detailed model of O&K Siemens' Rheinbraun 289 giant excavator. Dated 2013 and has over 680 pieces. Never started. It has been inventoried and NOTE: Missing two parts. #165 and #166. They are not large parts. If you are handy with sheet styrene or thick cardstock, you can make them but they are not flat some some skill is required. Otherwise includes all other parts, decals and instructions.
MPC Supermarine Spitfire Mk.Vb - RAF Polish Kosciuszko Squadron (Airfix Molds), 1/72, 1-4007
Plastic Model Kit, Box Condition: Sealed NM
$16
Still factory sealed. This is the 1982 Golden Wings issue from the original quality Airfix molds.
MPC Mig-21 - Early Variant - (ex Airfix), 1/72, 7003-70
Plastic Model Kit, Box Condition: VG++
$18
This kit is from Airfix molds and is one of the MPC '3 Big Bonus' features series. Dates from the late 1960s/early 1970s. The model features customizing parts (such as chrome plated bombs, missiles, prop, exhaust, air scoops, antenna and guns), stock and customizing decals and the clear modular display stand. Note that this issue still has 'Craft Master' under the MPC logo. Before this, MPC was marketing Airfix kits under the Craftmaster name in the USA. This continued for several issues and was finally discontinued although MPC continued to distribute Airfix and their own models. This kit has never been started. Inventoried 100% complete with all parts, decals and instructions present.
MPC Vosper Torpedo Boat - MTB / PT Boat, 1/72, 1-5201
Plastic Model Kit, Box Condition: Good-
$38
1982 issue from quality Airfix molds. This large scale model features full hull, propeller and rudder detail, complete deck fittings, full armament including torpedoes & twin 20mm cannon, five crew members and more. Never started and inventoried complete with all parts and includes decals and instructions. The box is only 'good-' because there are tiny black paint dots on the top and the 'Golden Tokens' on the long lower side have been cut off and are missing. The Vosper was the smallest and fastest of the Royal Navy craft used in World War II. They used their speed, low draft and the cover of darkness in attack. While torpedo assault was their primary mission, they also were employed as mine layers and transports for landing spies and commandos on enemy shores.
MPC Special Edition Corvette - Sparkling Gold Issue -1984 Chevrolet, 1/25, 1-3724
Plastic Model Kit, Box Condition: VG
$39
Limited edition molded in sparkling metallic gold finish. Features many custom parts such as air dam, spoilers and wheels, fully detailed engine & engine compartment, opening hood, complete interior and much more. Molded in "sparkling metallic gold" plastic, chrome, clear and with rubber tires.
MPC 1969 Pontiac Trans-Am Firebird - Stock Or Trans Am Versions, 1/25, 727-200
Plastic Model Kit, Box Condition: Good-
$59
Very Rare original issue. This model can build one of two versions and features a choice of engines: 400 CID V-8 or 225 CID OHC 6, good chassis and suspension with optional exhaust for either engine, complete interior, optional roll bar and optional soft vinyl seats, stock and optional tires, stock or clear hood and more. Molded in white, clear, chrome plate and with rubber tires & metal axles. NOTE: this kit has very neat subassembly as follows: 400 CID engine and transmission; steering wheel to dash; head rests to front seats; front wheel assemblies built and pins/shafts broken. The body is neatly painted green. Inventoried and NOTE: missing one roll bar support; easily made from sprue. Otherwise complete with all other parts, decals and photocopied instructions. The original instructions are missing.
MPC 1968 GTO Pontiac Hardtop - Stock / Custom / Funny Car, 1/25, 1168-200
Plastic Model Kit, Box Condition: Fair++
$39
Very rare original issue from late 1967/68. NOTE: builder kit only. Not collectible. Please read carefully. NOTE: this kit has been started; body painted; engine built, red tail lights to stock bumper, custom light buckets to custom rear roll pan, seats, shifter, dash and steering wheel to interior; Differential/exhaust & fuel pump to chassis and battery to radiator support. Windshield present, completely usable but broke in center (where it does not show). Inventoried and NOTE: missing two custom rims, stock hood (clear hood is present and fine), one custom spoiler side support and decals. Otherwise complete with all other parts and includes instructions.
Pyro Charles W. Morgan Whaling Ship, B249-125
Plastic Model Kit, Box Condition: Good-
$34
Dated 1965. This full hull kit features very good detail, pre-molded ratlines, detailed deck, billowing sails and more. Includes display stand. Measures 8.5 inches inches long when assembled. Molded in dark wood brown and off-white. A photo of the built kit on the instructions serves as a standing rigging diagram. Never started. Inventoried 100% complete with all parts and instructions. This is one of the 'intermediate' line of Pyro ship kits, which at the time were Pyro called '$1.00 Models' (later $1.25). All were roughly the same size and were a significant increase in detail from the '50 Cent Models'. Kits in the $1.00 line included the Skipjack, Racing Yawl, Persian Gulf Trader, Burma River Pirate, Polynesian Outrigger Canoe, Cutty Sark, Charles W. Morgan, HMS Bounty and HMS Ark Royal. 50 Cent kits in 1965 included the Mayflower, Barbary Pirate, USS Constitution, Santa Maria, Golden Hind, Half Moon, Bon Homme Richard, War Brig, HMS Victory and Flying Cloud.
Pyro Auburn 1935 Supercharged 851 Boattail Speedster - From Upgraded Molds, 1/25, C501-200
Plastic Model Kit, Box Condition: Good+
$44
From the mid 1960s and still the only larger scale Auburn kit in injection molded plastic. Improvements over the earlier issues include chrome wire wheels, rubber tires, clear parts and two good-sized trees of chrome plated details. The body & other parts are molded in red plastic. Features detailed engine, opening hood and good interior detail. Never started. Inventoried complete with all parts and instructions present. The '35 Auburn weighed 4200 lbs. and was one of the few cars of that time to have hydraulic brakes. Power came from a 150hp (@4000) supercharged engine with three inch exhaust pipes that easily sped the car to over 100 mph. Ab Jenkins set a record with a stock issue 851 at Bonneville Salt Flats in July of 1935, and became the first one to pilot a stock car for over 12 hours at an average of over 100 mph.
Monogram 1931 Rolls-Royce Phantom II Henley Convertible - Four Star Issue, 1/24, PC109-300
Plastic Model Kit, Box Condition: VG
$115
First issue hardbox of this incredible Monogram model from 1965. This kit retailed for $3 that year, which was a small fortune for a 1/24 car kit; however it was well worth it. It builds into a simply stunning model even without any painting and was very popular until discontinued in the 1970s. Very highly detailed and well molded featuring a rolling chassis build just like the full-size car, detailed engine and engine compartment, opening hood, full suspension, exhaust, driveline and steering linkage, full interior, opening doors, opening rumble seat and rumble seat door, optional position convertible top and more. Molded in a stunning high-gloss black, white, clear and chrome with rubber tires. Never started. Inventoried 100% complete with all parts and instructions present.