Hobby Craft Sopwith Camel F-1 - RFC 28 Sq Capt. William Barker 1917 / No. 65 Sq RAF Museum and Hendon (ex-Academy), 1/32, HC1681
Plastic Model Kit, Box Condition: Sealed Exc
$24
Still factory sealed and from quality Academy molds. This large-scale kit has good detail and a large decal sheet for two different aircraft.
Hobby Spot U Bell X-1 - With Transparent Fuselage and Full Interior, 1/72, 7201-2600
Plastic Model Kit, Box Condition: Good+
$36
Rare and very highly detailed model dated 1988 from Hobby Spot U, Tokyo, Japan. Features clear fuselage half, detailed cockpit, complete fuselage interior with rocket motor, fuel tanks & test equipment, optional position pilot entry hatch and more. Includes decals for #46062 Early, 46062 Glamorous Glennis, 46062 Last Fight and 46063 NACA. NOTE: this kit has very minor, 'professional' quality subassembly as follows: engine halves; bulkhead & control stick to floor. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Heller Admiral Sheer German Heavy Cruiser / Pocket Battleship, 1/400, 800
Plastic Model Kit, Box Condition: Good-
$34
1970s 'Yellow' box issue and a very nicely detailed, full-hull kit of this famous sister to the Graf Spee. These kits are still in demand for their detail and accuracy, since Heller did their research in identifying the differences between Scheer, Spee and Lutzow. These are integrated into these kits down to the porthole differences. A very nicely detailed, full-hull kit of this famous sister to the Graf Spee. She saw heavy action and was Germany's most successful capital ship surface raider of WWII. She was also a fairly luck ship and survived to very near the end of the war. While in port, most of her crew was ashore and an RAF bombing raid capsized the ship. She was scrapped after the war but part of the hull was used for fill for a quay. This model is very well detailed with 200 pieces. Never started. The parts are still in the internal factory sealed bags and includes decals, metal chain and instructions.
Revell Dassault Mirage III E/R - Mirage IIIE 1989-1989 Bicentennial / Mirage IIIR French Air Force, 1/72, 4438
Plastic Model Kit, Box Condition: VG+
$29
1989 issue with 96 parts and very colorful special decals. Features removable, detailed engine, optional position canopy, parts and decals for both versions, retracted or extended undercarriage and loadouts of bombs, AIM-9 Sidewinders and drop tanks. Never started. Inventoried with all parts, decals and instructions present.
Revell City Fire Department UH-1D - Los Angeles Police / Los Angeles Fire Deparment, 1/48, H2396
Plastic Model Kit, Box Condition: VG
$38
Hard-to-find Revell issue from quality ESCI molds. Thie Huey features extensive interior detail including cockpit and cabin, detailed engine and transmission, sliding cabin doors, optional position pilot doors and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Convair B-36 - Takara Japan Issue, 1/184, H139-700
Plastic Model Kit, Box Condition: VG++
$42
Hard to find Revell Takara issue dated 1977 with high-gloss box art unique to this kit. The model is from the same molds as the classic 1950s Pre-S kit. NOTE: this kit has minor, 'professional' quality subassembly as follows: horizontal stabilizer halves and jet engine pods. There is no other assembly. The aircraft has been inventoried with all parts present and includes decals and instructions.
Revell Battleship Bismarck - With Gold Medal Models PE Detail Set, 1/350, 05040
Plastic Model Kit, Box Condition: VG+
$89
Includes the excellent Gold Medal Models 1/350 Bismark Brass PE Detail Set; never used and complete with all parts and instructions. The actual kit is dated 2007 and still considered by many as the most accurate 1/350 Bismarck ever made. Features 659 pieces, full hull, excellent moldings and superb detail throughout. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions. Please NOTE that Revell put this kit in a VERY large box. USA customers may order the kit and request a UPS shipping quote to save on shipping. I am guesstimating that UPS will be a little less than 1/2 of the USPS quoted rate. NOTE: the shipping discount is not available for international shipping (UPS is actually more than USPS for international).
Revell Neptune P2V-7 Operation Deep Freeze - (P2V7), 1/104, H170
Plastic Model Kit, Box Condition: Good
$115
Lodela issue of the 'Famous Aircraft Series' Neptune on skis. This very popular kit is from the original 1950s Revell "S" Neptune but skis and new decals were added for this issue in addition to the amazing box art. Never started. It has been inventoried complete with all parts and includes decals and instructions. The box has light to moderate age foxing on the ends and back.
Revell Kugisho P1Y1/2 Ginga Frances, 1/72, H103-800
Plastic Model Kit, Box Condition: Good
$29
Rare 1976 Revell Japan hardbox issue with unique box art. This fine model features all parts and markings to make P1Y1, P1Y1a, P1Y2 and PI2-S variants, full interior detail, complete twin-row engines, optional position landing gear, open or closed bomb bay with different bomb or torpedo loads and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: upper floor, seats and instrument panels to the main floor. There is no other assembly. Inventoried and NOTE: missing (1) #17 propeller retainer; does not show when assembled and very easy to fabricate from flat plastic. Includes all other parts, 'near mint' condition decals and instructions.
Revell Kugisho P1Y1 Ginga Frances - (Milky Way), 1/72, H103-500
Plastic Model Kit, Box Condition: Fair++
$36
1972 Japan hardbox issue of this highly detailed model. It features parts and markings to make P1Y1, P1Y1a, P1Y2 & PI2-S versions, full interior, detailed engines, optional position landing gear, and open or closed bomb bay with different bomb or torpedo loads. Never started and inventoried complete with all parts and includes decals and instructions. Includes a full color and large Revell of Japan advertising sheet for "Fashionable (19)72 Twin Engine Series" which illustrates and describes 8 different Revell twin engine WWII aircraft. The box is only graded 'fair++' because a closed 3" split shown at the bottom of the box in the photo and from that an additional 2" closed tear down the long lower side.
Maircraft Boeing F4B4 And Curtiss Hawk P-6E And Curtiss Goshawk - Solid Wood Model Airplanes, 1/48, S16
Wood Model Kit, Box Condition: Poor to Good
$29
SALE!! Includes all three WWI solid wood 1/48 scale aircraft models in their original boxes. None of the kits have ever been started. The F4B-4 is inventoried 100% complete; the box is 'good-' and stained. The Hawk P-6E box is inventoried 100% complete and the box is 'good.' The Goshawk is inventoried and NOTE: missing the wheels; otherwise complete with all other parts. All three features 3D or 2D cut fuselage, 2D cut wings, printwood, small parts and full-size multi-view plans & instructions with templates. Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work.
Maircraft Taylorcraft - Solid Wood Model Airplane, 1/48, S-17
Wood Model Kit, Box Condition: Good
$28
Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, fuselage that is about 70% cut, profile cut wings and tail feather, strut material and fully formed wheels. Never started. It has been inventoried complete with all parts and includes instructions.
Maircraft Spad 13 - Solid Wood Model Airplane - (Spad XIII), 1/48, S19
Wood Model Kit, Box Condition: Good
$22
Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, fuselage that is factory cut to about 70% complete, profile cut wings and tail, fully formed wheels and clear material for the windshield. Never started. It has been inventoried complete with all parts and includes decals and instructions.
Maircraft Curtiss Goshawk - Solid Wood Model Airplane, 1/48, S18
Wood Model Kit, Box Condition: VG
$22
Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, 2D cut main parts, finished wheels and color insignia. Never started. It has been inventoried complete with all parts and includes instructions.
Maircraft Curtiss Hawk P-6E - Solid Wood Model Airplane, 1/48, S15
Wood Model Kit, Box Condition: Good
$22
Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps, all hardwood parts (very unusual; normally they were balsa), full color insignia sheet, 3D cut fuselage, profile cut wings and tail feathers, printwood and a small bag of sealed details. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including insignia and plans/instructions.
Maircraft Boeing F4B-4 - Solid Wood Model Airplane - (F4B4), 1/48, S16
Wood Model Kit, Box Condition: Good++
$22
Maircraft was originally founded in the early or mid 1930s by Gordon Christoph and went by the name Aircraft Model Company. The company produced a typical line of solid 'profile cut' kits that required the usual high talent levels for carving and finishing. A former Comet Model Airplane & Supply Co. salesman, Jack Mair, bought the company in the early 1940s and renamed it Maircraft. This company was one of the handful of solid kit producers who issued models in a consistent 1/48 scale during the 1930s and 1940s (others included Hawk and Dyna-Model). This lead to one of the most desirable and rare model kits ever produced in the USA - the wood/plastic 1/48 United DC-3 model issued immediately after World War 2. Other than the P-61 and a few other Maircraft offerings, most were simple kits that sold for the low price of about 35 cents and gave the owners many hours of pleasurable work. This kit features a full size plan with instructions steps and templates, 2D cut fuselage and wings, other wooden parts, a factory-sealed small envelope of details and full color decals by Walthers! (Usually it was just a cut-out insignia sheet). The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including instructions.
Glencoe Convair Manned Observation Satellite - ex 1950s Strombecker Convair Manned Observational Satellite Vehicle, 1/200, 05911
Plastic Model Kit, Box Condition: Sealed NM
$52
Still factory sealed. This reissue is from the original 1950s molds of the famous and classic Strombecker sci-fi kit. Designed by Krafft Ehricke of Convair's Astronautics Division as a 200 foot long, 600 mile-high orbiting laboratory for 4 men. 24 inches long when assembled.
Eagle Model Aircraft Co Avenger TBF
Wood Model Kit, Box Condition: Good
$24
Rare kit from the 1940s and in very good condition inside and out. Solid wood, large-scale display model has a 10.5 inch wingspan when assembled. Features profile (2D) cut fuselage and wings, printwood, sandpaper, cut-out insignia on the instructions and detailed full-size plans with templates, instructions and a painting guide. Never started and 100% complete with all parts and paperwork. Eagle Model Aircraft was located in Brooklyn, NY. In the late 1930s and 1940s they produced a very extensive line of large solid wood scale kits as well as stick-and-tissue flying models.
Eagle Model Aircraft Co P-61 Black Widow
Wood Model Kit, Box Condition: VG
$30
Rare kit from the 1940s and in very good condition inside and out. Solid wood, large-scale display model has a 10 inch wingspan when assembled. Features profile (2D) cut fuselage, twin booms & wings, printwood, fully finished hardwood main and nose wheels, sandpaper, a sealed envelope of CASCO powdered glue, cut-out insignia on the instructions and detailed full-size plans with templates, instructions and a painting guide. Never started and 100% complete with all parts and paperwork. Eagle Model Aircraft was located in Brooklyn, NY. In the late 1930s and 1940s they produced a very extensive line of large solid wood scale kits as well as stick-and-tissue flying models.
Eagle Model Aircraft Co P-47D Thunderbolt Razorback
Wood Model Kit, Box Condition: Exc
$28
Rare kit from the 1940s and in exceptional condition inside and out. Solid wood, large-scale display model has a 9 inch wingspan when assembled. Features profile (2D) cut fuselage & wings, printwood, sandpaper, color insignia sheet and detailed full-size plans with templates, instructions and a painting guide. Never started and 100% complete with all parts and paperwork. Eagle Model Aircraft was located in Brooklyn, NY. In the late 1930s and 1940s they produced a very extensive line of large solid wood scale kits as well as stick-and-tissue flying models.