Hawk Ryan NYP - Spirit of St. Louis, 1/72, 608-60
Plastic Model Kit, Box Condition: Good
$14
Dated 1965 but this is a later version in the softbox but still with classic Tom Morgan artwork. Very nicely molded kit with all recessed panel lines and excellent fit. Never started. Inventoried and NOTE: missing one wheel. Otherwise complete with all other parts, decals and instructions.
Hasegawa US Aerospace Ground Equipment Set - Hydraulic Test Stand / High Pressure Compressor / Air Conditioner / Lighting Unit / a/M32A-60A Generator Set / Tool Box / Chocks / Four Ground Crew, 1/72, X72-6
Plastic Model Kit, Box Condition: VG+
$24
Very highly detailed accessory set includes all items listed as well as three types & colors of flexible hoses. Never started. Inventoried and NOTE: missing one figure and three arms. Otherwise includes all other parts, decals and instructions.
Hasegawa Aircraft Weapons IV US Air To Ground Missiles - AGM-84A Harpoon / AGM-12C / AGM-62A / AGM-45 LAU-34A / AGM-65 / LAU-88A / ALQ-119 / A/A37U Tow Target System RMU-10/A Plus TDU-10B / AGM-12B / AGM-78 And More, 1/72, X72-4
Plastic Model Kit, Box Condition: Sealed NM
$24
Still factory sealed. This is an ideal set for 1/72 US Jets and includes multiples of everything listed and more.
Hasegawa Aircraft Weapons II US Guided Bombs & Gun Pods, 1/72, X72-2
Plastic Model Kit, Box Condition: VG
$24
Very highly detailed accessory set includes all of the bombs and gun pods shown on the box top. Never started and inventoried complete with all parts and includes decals and instructions.
Hasegawa Curtiss SOC-3 Seagull - USS West Virginia with Landing Gear, 1/72, JS057-100
Plastic Model Kit, Box Condition: Good0
$22
From the late 1970s/1980s and finely molded. Unusual landing gear (no float) version with markings for the hi-vis paint job from the battleship USS West Virginia. Never started. It has been inventoried complete with all parts and includes decals and instructions. The box has age foxing on the four side panels.
Hasegawa Bf-109 G-6 Gustav 6 - (Bf109G6), 1/72, AP17
Plastic Model Kit, Box Condition: Exc+
$20
This model is from 1993 and is very finely detailed and molded featuring 48 pieces, all recessed panel lines, good cockpit and more. Never started and inventoried complete with all parts and includes decals and instructions.
Hasegawa F6F-5E Hellcat Nightfighter - VF(N)-22 / Patexent River Evaluation Aircraft With AN/APS-4 Radar - (F6F5), 1/72, SP113
Plastic Model Kit, Box Condition: Exc++
$20
Very finely molded and detailed and includes correct parts for the radar Hellcat and decals for the two aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions.
Execuform Northrop XP-56 - Model N2B - Bagged, 1/72
Vacuform Model Kit, Box Condition: Exc++
$10
Still factory sealed. This is a basic vacuform kit. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Execuform Vultee V-1A - Bagged, 1/72
Vacuform Model Kit, Box Condition: Exc++
$20
Still factory sealed and the only 1/72 scale kit ever made of this subject. The attractive V-1A was an eight-passenger 1930s airliner flown by American Airlines.
Formaplane Noorduyn UC-64A Norseman, 1/72, 1
Vacuform Model Kit, Box Condition: Sealed NM
$8
Still factory sealed. Nicely molded with fine recessed detail. Includes clear canopy and brief aircraft history. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Execuform Douglas DC-2 (XC-32 C-32A C-33 C-34 R2D-1) Plus DC-1 Conversion - Bagged - (R2D1), 1/72
Vacuform Model Kit, Box Condition: Sealed
$28
Still factory staple sealed. Includes rare DC-1 conversion; other than scratch building, this is still the only kit/conversion with a DC-1 in any scale or material. Basic vac kit only. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Execuform Vultee XP-54 Swoose Goose, 1/72
Vacuform Model Kit, Box Condition: Sealed
$18
Still factory sealed. This is a basic vacuform kit. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Griffin Lockheed T2V-1 Seastar - Bagged, 1/72
Vacuform Model Kit, Box Condition: Sealed
$16
Unusual subject matter. Cleanly molded, basic vac kit with some molded in detail. Includes many interior parts and excellent wheels. Molded in white with an excellent clear canopy. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.
Flyhawk Battle of the Atlantic Anti-Submarine Warfare Set 1 - Royal Navy J Class Destroyer / Shorrt Sunderland / German U-Boat Type VIIB Air-Enhanced Submarine / Display Base, 1/700, FH1120
Plastic Model Kit, Box Condition: Exc
$32
This model includes everything listed and is incredibly well detailed for this scale. Includes PE details. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Frog Supermarine Spitfire Mk14 - (RAF or SEAC Kai Tak) and V-1 Flying Bomb - Red Series, 1/72, F194
Plastic Model Kit, Box Condition: Good
$28
Well molded kit like most all Frog models. Includes V-1 and Spitfire. Spitfire has optional markings for 'Punjab' Sq RAF Dienst Belgium 1945 or No.132 Sq RAF SEAC Kai Tak Hong Kong 1945. The kit has never been started. The parts are still sealed in the factory clear bag and includes decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hangar, ambulance, sound locater, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.
Frog Bristol Beaufort Spin Issue (For Motorizing) - No 93 Sq RAAF Labuan 1945 or Mk.II 42 Sq Coastal Command RAF, 1/72, F229SPIN
Plastic Model Kit, Box Condition: VG++
$29
This model contains the extra parts to allow the fitting of the additional Frog F20 Spin-A-Prop motorizing kit (not included). This is a very cleanly molded Beaufort with traditional Frog quality. Never started and inventoried complete with all parts and includes decals and instructions. Please note that there is some dry residue from masking tape on the box sides & bottom. The actual tape fell off long ago.
Flyhawk 1/400 RMS Titanic Detail Up / Upgrade Set - For the Academy Kit, 1/400, FH400001
Plastic Model Kit, Box Condition: Exc
$89
Build the ultimate 1/400 Titanic with this detail set. It is designed for the superb Academy 1/400 kit (not included). Never started. Inside, everything is still in the factory sealed bags and includes instructions.
GPmodeling Detroit Diesel Series 60 Engine With Radiator - 3D Printed Super Detailed Engine Kit, 1/24, DD60
Resin Model Kit, Box Condition: Exc
$42
Incredibly well detailed and a huge upgrade for many 1/24 scale Truck / Semi kits. Includes about 32 3D printed parts for the engine as shown, an amazingly fine radiator (that you can see through) with all cooling fins and complete decals. NOTE: this is a kit that must be built and painted. It does NOT come built and painted like the photo! Never started. The parts are all still in the factory sealed bag. There is a sheet of paper with the kit that says you can use it with your smart phone to view the assembly instructions on-line.
ESCI Nieuport 17C / French Spad XIII / Tokot Nieuport 16c / Testors 1/48 Scale Nieuport type 17C.1 / Testors 1/48 Gee Bee Racer, 1/72, 9017
Plastic Model Kit, Box Condition: Good to Sealed Exc+
$25
SALE!! Includes all five kits in the original boxes. The ESCI 1/72 Nieuport and Spad are never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The 1/72 Toko Nieuport 16c is never started and inventoried complete with all parts and includes decals and instructions. The Testors 1/48 Nieuport is still factory sealed. The Testors 1/48 Gee Racer is never started. It has been inventoried and NOTE: missing propeller retainer. Easily made but no necessary for assembly. Otherwise complete with all other parts, decals and instructions present.
Fujimi TWO Mig-21 bis Black Lynx - Finnish Air Force / USSR Air Force, 1/72, H-21
Plastic Model Kit, Box Condition: NM
$32
SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts, decals and instructions present. Nicely molded models feature all fine recessed panel lines, good cockpit detail, two piece canopy, separately molded wing flaps and ailerons, optional position speed brakes, detailed gear wells, drop tanks, air-to-air missiles and a large, extensive decal sheet (and paint guide) for all aircraft listed.