Ace BMP-2D Afghanistan, 1/72, 72125
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale and includes many brass PE details. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Ace BRDM-2 With Konkurs ATGWs, 1/72, 72103
Plastic Model Kit, Box Condition: VG
$18
Made in the Ukraine and highly detailed for this scale. Never started and inventoried complete with all parts and includes decals and instructions.
Ace BMP-1U Shkval Ukranian IFV, 1/72, 72124
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale. Never started and inventoried complete with all parts and includes instructions.
Admiral Supermarine Seafire Mk.Ib - FAA 761 Naval Air Sq Hestridge March 1943 / FAA 736 Naval Air Sq St. Marryn 1943, 1/72, ADM7207
Plastic Model Kit, Box Condition: Exc
$24
High quality model from new molds. Features all fine recessed panel lines, PE details, very good cockpit, injection molded canopy, detailed gear wells and more. Includes 4-view color paint guide and decals for the two aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Dragon Sd.Kfz.251/2 Ausf.D With Wurfrahmen 40 - Armor Pro Issue, 1/72, 7310
Plastic Model Kit, Box Condition: Exc
$32
Incredibly well detailed inside and out. This model features over 210 pieces, full interior with optional position rear doors, two frets of PE parts, flexible tracks, a full load of 28cm rockets or optional 32cm projectiles and much more. Includes a full color paint guide and markings for three different vehicles. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Dragon Sd.Kfz.251/1 Ausf.D And 7.5cm Pak 40 - Armor Pro Issue, 1/72, 7369
Plastic Model Kit, Box Condition: Sealed NM
$26
Still factory sealed. Incredibly well detailed inside and out. This model includes the vehicle and gun and features over 150 pieces, full interior with optional position rear doors, towing parts for the gun and vehicle, finely reproduced gun stays and hand wheels, armored shield with rivet detail, one-piece 7.5cm Pak with hollow muzzle made by slide mold, optional 'action' or 'stowed' gun trails and much more. Includes a full color paint guide and markings for two different vehicles.
Dragon Sd.Kfz.251/7 Ausf.C With 2.8cm SPzB 41 AT Gun - Armor Pro Issue, 1/72, 7315
Plastic Model Kit, Box Condition: Exc
$18
Incredibly well detailed inside and out. This model features over 140 pieces, multiple frets of PE parts, flexible tracks, full interior with optional position rear doors, opened or closed vision ports, opened or closed engine hatches and much more. Includes a full color paint guide and decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Dragon Sd.Kfz.164 Hornisse - Armor Pro Issue, 1/72, 7234
Plastic Model Kit, Box Condition: Exc
$16
Incredibly well detailed inside and out. This model features over 180 pieces, brass PE parts, flexible tracks, detailed gun area interior and much more. Includes a full color paint guide and decals for 6 different tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Dragon Sd.Kfz.167 StuG IV Early - Armor Pro Issue, 1/72, 7235
Plastic Model Kit, Box Condition: Exc
$20
Incredibly well detailed inside and out. This model features 218 pieces, brass PE parts, flexible tracks, one-piece return rollers from new tooling, all new muffler assembly, opened or closed hatch, correct MG mount with shield, early production gun mantlet and correct muzzle brake, optional periscope on commander's hatch, optional side skirt armor in PE brass, two-piece bogies (the outer parts are the rubber wheels to simply painting) and much more. Includes a full color paint guide and decals for 7 different tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
AML Goppingen Go-9 - Technology Testbed Aircraft - (Do-335 / Go9), 1/72, 72-024
Plastic Model Kit, Box Condition: Good+
$26
Limited issue kit that cleanly molded, highly detailed and features all recessed surface detail, high-definition resin details, good cockpit, optional position canopy and more. Includes full color paint guide. Never started and inventoried complete with all parts and includes decals and instructions. The Göppingen Go 9 was a German research aircraft built to investigate the practicalities of powering a plane using a pusher propeller located far from the engine and turned by a long drive shaft. In 1937, Claudius Dornier observed that adding extra engines and propellers to an aircraft in an attempt to increase speed would also attract a penalty of greater drag, especially when placing two or more engines within nacelles mounted on the wings. He reasoned that this penalty could be minimized by mounting a second propeller at the rear of an aircraft. In order to prevent tail-heaviness, however, the engine would need to be mounted much closer to the center of gravity (forward). Dornier patented this idea and decided to build a test aircraft to evaluate it. The aircraft was designed by Dr Ulrich Hütter as a 40% sized, scaled-down version of the Dornier Do 17's fuselage and wing panels without the twin-engine nacelles and built by Schempp-Hirth. The airframe was entirely of wood and used a retractable tricycle landing gear – one of the earliest non-Heinkel-built German airframe designs to do so. Power was supplied by a Hirth HM 60 air-cooled, inverted inline four-cylinder engine mounted within the fuselage near the wings. Other than the engine installation, the only other unusual feature of the aircraft was its all-new, full four-surface cruciform tail, which included a large ventral fin/rudder unit of equal area to the dorsal surface. Initially towed aloft, flight tests began in June 1941, but later flights operated under its own power. The design validated Dornier's ideas, and he went ahead with his original plan to build a high-performance aircraft with propellers at the front and rear, resulting in the amazing Dornier Do 335. The final fate of the Gö 9 is not known.
AML Siebel Si-202 Hummel - Luftwaffe Oblt. Stolle Staffelkapitain 8./JG2 France 1941 / Slovakia 1942, 1/72, 72 014
Plastic Model Kit, Box Condition: Sealed NM
$18
Still factory sealed. Nicely detailed kit with photoetched details and decals for the two aircraft listed.
Glencoe Bristol HR.14 Sycamore - RAF No.228 Sq / No. 103 Sq / No. 275 Sq / No. 225 Sq (Used in Cyprus for Anti-Terror Operations March 1953) / HMS Ocean or Royal Australian Navy, 1/72, 04001
Plastic Model Kit, Box Condition: VG
$24
Features cockpit detail, optional position cabin doors and detailed rotor head. Contains markings for both Air Forces and a total of 6 helicopters. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The first Sycamore flew in 1947 and deliveries continued until 1957. This very successful design was in use well into the 1970s. Detailed interior and Scale Master Decals for six British Army Machines and one Australian squadron.
Glencoe de Havilland Venom FB.4 - (2) Switzerland / (4) British / Venezuela, 1/48, 05107
Plastic Model Kit, Box Condition: Sealed Exc++
$18
Factory sealed. Features Scale-Master decals for four British, two Swiss and one Venezuelan Aircraft. FB.4 was the last and best version of the venerable Venom, which was one of the world's first jet aircraft specializing in ground attack.
MPM Bristol Blenheim Mk. IV - Cdr. Hughie Edwards Victoria Cross July 4 1941 Bremen Port Attack / Free French North Africa 1941 / Finnish Air Force (Suomen Ilmavoimien) ValokLtue/LeLv 48 Onttola Late 1942, 1/72, 72089
Multimedia Model Kit, Box Condition: Fair
$22
Hard-to-find multimedia kit that features all fine recessed panel lines, many high-definition resin parts (including engines), PE details, film instruments, very good cockpit, fully enclosed & detailed main landing gear wells and more. Includes 4-view paint guide and decals for all three aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions. Please NOTE that the box top is in 'good' condition but it is graded 'fair' because the box tray (the bottom) is missing. I have made a substitute tray from cardboard to protect the kit during shipping.
MPM Avia B-35 And Aero C-104 / Bu-131, 1/48, 4802
Multimedia Model Kit, Box Condition: VG
$18
SALE!! Includes both 1/48 scale kits in their original boxes. The Avia B-35 has injection molded details and vacuformed main airframe parts. Never started and inventoried complete with all parts present and includes decals and instructions. The Bu-131 (Aero C-104) is a completely injection molded model in large 1/48 scale version. It has been inventoried 100% complete with all parts, decals and instructions present. NOTE: this kit has very minor 'professional' quality subassembly as noted: wheels halves are built. The typical molding sink marks in the right fuselage half are professionally filled and sanded. There is no other work done.
MPM Focke-Wulf FW-190 S-5 - Luftwaffe S-5 Unknown Unit Germany 1943 / S-8 Fighter School Altenburg 1944 - (FW190S-5 / FW190S-8), 1/72, 72030
Plastic Model Kit, Box Condition: Sealed Exc+
$28
Still factory sealed. This model is a quality, limited issue kit of the two-seat '190 trainer. It features all very fine recessed panel lines, photo etched details, film instruments, very good dual cockpits, optional parts for S-8 or S-5 variants and more. Includes paint guide and decals for both aircraft listed.
LTD Commonwealth Boomerang CA-12, 1/48, 9806
Plastic Model Kit, Box Condition: Good
$36
Limited edition featuring fine recessed panel lines, detailed cockpit and engine, optional belly tank and decals for 3 aircraft - two aircraft of #4 RAAF Squadron and one aircraft of #5 RAAF. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Welsh Vickers VC-10 K.Mk3/4 Tanker, 1/144, PJW56
Vacuform Model Kit, Box Condition: Exc
$20
Very high quality vac kit with 24 finely cast metal details. Never started. The small parts are still in the factory sealed bags. The big parts were never sealed and have been inventoried complete including RAF decals and instructions.
Welsh Vickers Super VC-10 - East African Airlines, 1/144, SL38
Vacuform Model Kit, Box Condition: Exc++
$22
Very high quality vac kit with cast metal details. Never started. The small parts are still in the factory sealed bags. The big parts were never sealed and have been inventoried complete including very large & colorful 'East African' decals and instructions.
Welsh Boeing 737-330 Lufthansa or Condor - (737), 1/144, SL43
Vacuform Model Kit, Box Condition: VG
$20
Very high quality injection molded / metal and vacuform kit with metal details and full decals. Features injection molded wings, engine pods and stabilizers, vac fuselage, metal struts, engine cowls, fans, nose and main gear wells, wheels and gear doors. The kit has never been started. All small parts still in the factory sealed bags. The large parts were never factory sealed have been inventoried complete including decals and instructions.