Plastic Model Kit, Box Condition: Good
$89
Original first issue 'Pre-S' kit from 1954 and before the 'S' Cement logo was used. The box has classic 'Flying Dragon' Richard Kishady artwork. Features rotating turrets and propellers, pilot, copilot and bomber figures and "The Flying Dragon" decals. Correctly molded in gloss olive drab and clear and includes the famous Revell Swivel 'Globe' base. Never started and 100% complete with all parts, decals and instructions present. NOTE: one part, the very small nose door, is a slightly different color plastic.
Plastic Model Kit, Box Condition: Good++
$225
Very Rare. This is one of the first three aircraft models issued by Revell back in 1953. This kit is correct with no rivets and no landing gear as well as the unique stand that was only issued with these three kits (and their gift set). This box is in unusually good condition, complete with all end flaps and has not been crushed - usually these thin one-piece boxes are in very bad condition. The box has never been repaired. Flaws include the marker writing on the top, the same size marker with 'K219' on the left short end panel, and very light general wear. Never started. Inventoried 100% complete with all parts, decals and instructions present. Instructions are printed on the back of the box. It is very interesting to note that this kit is different from the 'Pre-S' issue in the following ways: no rivet detail, almost no panel lines, different part numbers, pilots are a part of the fuselage (busts only), one piece wings and absence of the pods at the half-wingspan line, no landing gear and no holes for such, very early 'Colortone' logo decals and a silver, two piece plastic stand of a unique design that was never used again.
Plastic Model Kit, Box Condition: VG
$28
From very high quality ex-Heller kits. Cleanly molded with no flash. Soviet Union release. Full hull kit with excellent detail. The kit has never been started. NOTE: missing part #22, a bridge piece that is solid, smooth, about .5 inches high and 1.3 cm high and shaped like half of an ellipse. This part can be made by a skilled modeler. Otherwise inventoried with all other parts and instructions.
Plastic Model Kit, Box Condition: Sealed VG+
$48
Still factory sealed. 1967 Chrome plated version with John Andrews box artwork. This model is still the only 1/48 injection molded kit of the short-wing 'A' Variant. It features gun packs, AIM-9 Sidewinder missiles, bomb load, good cockpit, optional position canopy and more.
Plastic Model Kit, Box Condition: Good
$32
Very highly detailed model that is superbly molded with all very fine recessed panel lines. Features parts for either version (including detailed cameras for the B-2b), highly detailed cockpit, detailed gear wells, photoetched parts and bomb load for B-2 variants. Has decals for the three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$52
1995 reissue of this great kit that uses the original 1958 molds. Truck features detailed engine, tilting cab, full chassis and interior, while the trailer includes piping detail, spare tire, ladder and opening valve compartment doors. There is also a Champion curb sign with decals and crew of two as shown on the cover artwork. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$24
Still factory sealed and the only 1/72 scale injection-molded model of this aircraft.
Plastic Model Kit, Box Condition: Sealed
$24
Factory sealed. The Junkers D-1 was a evolutionary all-metal, low-wing German Attack Aircraft of late WWI. The actual model is a limited release and one of only 2000 kits made. Very high quality injection moldings. Complete with instructions and full decals.
Plastic Model Kit, Box Condition: Good
$37
1976 release that is one of the last releases from the 'S' kit molds from 1958. Makes an ideal 'Classic Builder' and features optional position landing gear, movable wheels, four bombs, pilot figure and hinged cockpit canopy and refueling probe. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc+
$115
1961 issue in the famous 'Airmail' design hardbox with artwork by J. Tsuchimori. This is the second version of this kit. The straight turbojets have been replaced with the early Jt3D-1 Fanjets and the vertical fin is higher. Features moving rudder, rotating wheels and Revell's famous 'Globe' stand. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good-
$44
Hardbox 'Air Power' series hardbox issue with a copyright date of 1961 and classic box art. This kit is from the original molds as the Pre-S kit and makes an ideal builder. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$62
1963 hardbox issue of the rare 'Whip Fly' series. the artwork for this series was 'action' photos by Tom Kelly. Whip-Fly kits feature the 1950s 'S' issue aircraft model with nose ballast, a metal control ring, 12 feet of control line and a control handle. Never started and the parts and all paperwork are still in the internal factory sealed bags. Literally all of the contents are factory sealed. The short-lived Whip-Fly series seemed like a good idea...at first. It was quickly discontinued when Revell discovered that heavily weighted models with sharply pointed noses traveling at 50 or 60 MPH might not be safe.
Plastic Model Kit, Box Condition: Good1
$24
1971 issue. Features moving propeller and wheels, pilot, optional position landing gear and Finnish decals. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$20
This is a very well detailed and molded model that features very good cockpit, complete cabin, optional position cabin doors, optional parts and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$22
Very nicely detailed model from all new molds. Features 190 pieces, all fine recessed panel lines, very good cockpit, detailed gear wells and more. NOTE: this kit has minor, 'professional' quality subassembly as follows: cockpit tub assembled; turbine fan to back of exhaust cone; two supports to main gear bay well. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$34
1999 issue that is very highly detailed inside and out. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$24
Excellent armor kit. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$24
SALE!! Includes both kits in the one box shown. They have never been started and both are still in the factory sealed bag. Includes decals and instructions. Limited run injection molded kit features fine recessed panel lines, 'good' cockpit detail, injection molded clear canopy (not vacuform), printed instrument panel and paint guide with an extensive decal sheet two different aircraft.
Plastic Model Kit, Box Condition: Exc
$15
Limited production kit with injection molded plastic parts. The kit has never been started. Inventoried 100% complete including all parts, decals and instructions.
Plastic Model Kit, Box Condition: VG
$38
Have you ever wanted to build the world's first injection molded plastic kits? Well, now you can and for an affordable price. As you know, Frog in England produced the world's first plastic model kits starting back in 1938. Merlin Models receive permission for this very limited edition, exact replica of this historic Frog Penguin kit. Nicely molded and also includes photocopies of the original Penguin instructions. The kit has never been started. All parts and paperwork are still in the factory sealed bag. In the late 1930s, before WWII, Frog created the world's first line of injection molded plastic model kits. Since Frog stood for 'Flies Right Off the Ground' and Frog had a famous line of flying models, the world's first all injection molded kits were called Frog Penguin for the bird that does not fly. The Penguin Hart was among the early pre-war releases by Frog.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199