Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

AHM P-51D Mustang Racer Miss America, 1/87, SK-11

Plastic Model Kit,   Box Condition: Sealed NM

$32   

Still factory sealed. HO scale kit. Very nicely molded and detailed with full color decals, movable control surfaces, colorful decals and full color painting guide.

Revell Lockheed F-94 Starfire 1st Issue - Pre 'S' One Piece Box, 1/56, H201-59

Plastic Model Kit,   Box Condition: Fair

$145   

One of the first three Revell aircraft molds issued in 1953. This kit is correct with no rivets and no landing gear. Instructions are printed on the back of the box. Molded in the correct high gloss silver and clear. The kit has never been started. NOTE: missing stand arm. Otherwise inventoried with all other parts and decals. The box has wear and creasing as shown. It is missing three of the four small inside flaps. Both large and visible end flaps are complete. Please note that this kit is different from the 'Pre-S' issue in the following ways: no rivet detail, almost no panel lines, different part numbers, pilots are a part of the fuselage (busts only), one piece wings and absence of the pods at the half-wingspan line, no landing gear and no holes for such, very early 'Colortone' logo decals and a silver, two piece plastic stand of a unique design that was not used again.

Orange Crush-Revell 1915 Ford Model T, 1/32

Plastic Model Kit,   Box Condition: Good-

$69   

Very rare kit with a fascinating history. Around 1958/59, Orange Crush of Mexico offered a promotion. They offered free, colorful, plastic model cars if you collected correctly-marked Orange Crush bottle caps. The models are 1/32 scale Revell Highway Pioneer series - although there is no mention of Revell or Lodela anywhere on the box. Orange Crush had the boxes and even the instructions specially made for them with no mention of a manufacturer. They were never given numbers. The boxes were very thin and fragile cardboard. This has contributed to wear and you must be very cautious with them. The kit has never been started. The parts are still in the internal factory sealed bag and the instructions are sealed in the bag as well. You could redeem your caps two ways - at the Orange Crush truck and at a Modelandia Hobby House. The box sides show the 18 cars in the series. Orange Crush also released two full-color booklets and a complete paint set for the cars. A colorful cardboard box held 7 colors of paint in glass bottles, complete with 'Orange Crush' screw-on caps! The entire promotion was done in coordination with Modelandia Hobby House which had up to 19 stores. Modelandia's name appears on each of the boxes and the paint as well. Robina S.A. was the bottler or distributor of Orange Crush in Mexico at that time. The box side lists the other 18 kits with small color pictures of each and shows three sizes of OC - Family Size (Familiar), Grand (Grande) and Normal. You could also obtain models with Titan bottle caps. Titan was also bottled by Robina and came in large (Titan) and smaller (Titancito) sizes and apparently more than one flavor. We do not know how Orange Crush had access to the plastic kits or who sealed the internal bags with the Crush instructions inside them. We can assume that it may have been Lodela, since they would have had access to the Revell molds. It is not know for how long the promotion lasted, but Orange Crush was one of the most dominant soft drinks in Mexico at that time. Here is one clue: some boxes claim that Modelandia had 13 locations; other boxes, which obviously came later on, claim 19 locations. This may indicate that this promotion went on for a significant amount of time.

Life-Like Santa-Maria Columbus' Ship, B314-75

Plastic Model Kit,   Box Condition: Sealed Mint

$29   

Still factory sealed. From ex-Pyro molds. From the August, 1492 expedition from Spain. With sails, ratlines and good molded detail for that time. Full hull kit is about 5 inches long and includes display stand.

KVZ Mil Mi-4 - Civil DDR / USSR / Polish / Czech, 1/100

Plastic Model Kit,   Box Condition: VG++

$22   

KVZ was the logo used by this East German kit manufacturer from 1969 to 1973. During this time, some fantastic Cold War kits were produced of Russian Aeroflot Airliners and Military Helicopters and Aircraft. Comes with colorful markings for DDR, Polish, Russian and Czech versions. Molded in silver, black and clear and with original clay nose weight and factory glue. Never started. Inventoried 100% complete with all parts, decals and instructions.

KVZ Mil Mi-1 'Hare' Helicopter - Poland / USSR / DDR / USSR, 1/100

Plastic Model Kit,   Box Condition: Fair

$22   

KVZ was the logo used by this East German kit manufacturer from 1969 to 1973. During this time, some fantastic Cold War kits were produced of Russian Aeroflot Airliners and Military Helicopters and Aircraft. Never started. This kit is molded in dark green and clear and features raised details, antenna material and has cockpit detail with a crew of two. It includes decals for all countries listed. Never started. NOTE: missing small clear panel under nose. Otherwise inventoried with all other parts, decals and instructions.

PP Aeroparts RAF Nitrogen Trolley, 1/72, GA704

Multimedia Model Kit,   Box Condition: Exc

$32   

Very highly detailed multimedia kit. Includes three bags of perfectly cast metal parts, a fret of photoetched parts, wire, full decals and complete instructions. The kit has never been started. Internal factory sealed bags including decals and instructions.

Arii Mitsubishi Ki-15-I Type 97 Mk.1 'Babs' - Japanese Army Scout Airplane, 1/72, 10

Plastic Model Kit,   Box Condition: Sealed Mint

$26   

Still factory sealed. I cannot verify it since the kit is sealed, but I feel these molds are from LS or Mania.

Schreiber-Bogen Lockheed 1649A Super Constellation - Lufthansa Cardstock Kit, 1/50, JFS-07989-95

Cardstock Paper Model Kit,   Box Condition: Sealed Mint

$79   

Giant 1/50 scale Lockheed Super Connie kit with Lufthansa markings. High quality cardstock kit from the 1950s or early 1960s. Fully decorated with high quality color printing that Schreiber is famous for. The kit has not been started. All the sheets are intact and in "very good++" condition. Includes instructions.

Revell Lockheed F-94C Starfire Interceptor - With One Piece Stand Arm - Pre 'S' Kit, 1/56, H210-79

Plastic Model Kit,   Box Condition: VG++

$175   

1954 Pre-S issue. This is the rare second issue. The first issue was in the simple one-piece box and Revell quickly converted to this two-piece box as it was much more durable and a full-color lithographed 'slick' could be used. For the second issue, Revell added rivet and raised panel line detail as well as landing gear, a two piece box and H210-79 kit number. The famous 'Globe' clear stand was added, but this kit has the rare one piece stand arm and the instructions reflecting that. Revell quickly realized that the one-piece arm was not strong enough, and quickly modified it to the familiar three piece arm for the 3rd issue. The box is in very good++ condition with four solid corners, nice color and gloss and minimal wear with minor insect damage on the corners of one short side. The kit has never been started. Inventoried 100% complete including decals and instructions. Decals and instructions are in near mint condition. The original small parts 'krinkle' bag is present as well.

Monogram Whirlwind - 30 Inch Wingspan Pre-Fabricated Gas Powered Control Line Model, C-1

Multimedia Model Kit,   Box Condition: Exc+

$450   

Monogram's first aircraft model dated 1946. A very rare kit for the advanced collector. When you see this model, it's easy to see how Monogram took the modeling world by storm. The kit is highly engineered, tested and very prefabricated. The balsa body is 24 inches long and completely finished. Wings are completely finished with airfoils. The tail parts are cut to shape and the metal landing gear wire is bent to shape. All other wire parts are fully formed and it includes rubber tread wheels as well as plastic canopy and spinner and decals. The cowling is hinged to provide easy access to the engine, coil, battery and fuel tank. Includes two very large sheet of full size plans/instructions as well as sandpaper, all required hardware, printwood and more. Inside, the kit is like new. It has never been started and all cardboard dividers are intact. All small parts are still in the factory sealed bag. All other parts have been inventoried complete. The plans and decals are excellent and the even the original factory tissue packing paper is still present. The box has excellent color, four solid corners, no repairs and the original factory sealing tape on the sides and bottom tray. The box grades 'excellent+' and the only flaws are general light edge, corner and shelf wear. Postal insurance is required for this kit.

Aurora Convair 990 Jet Mainliner United Air Lines, 1/107, 397-198

Plastic Model Kit,   Box Condition: Exc++

$1299   

Very rare kit from 1962. First and only issue. This is the largest injection molded kit ever made of the very fast Convair 990 airliner. The box has as-new color and sheen with four solid corners and no repairs. There are no price tags, tape or price tag/tape marks. The only flaw is light edge wear. The model is molded in the correct white and clear plastic, with the large clear triangle display stand and full color United decals. The kit has never been started. It has been inventoried 100% complete including all parts, decals and instructions. Decals and instructions are both flat with slight yellowing being the only flaw. NOTE: shipping insurance is required with this kit. The Convair 990 and its near sister 880 were very high performance airliners. Unfortunately they did not find favor with commercial operators. The commercial failure of the 990 caused Aurora to pull these molds from production shortly after the introduction of the kit. The 990 was a larger and faster (Mach .91) airliner than the 880, but it failed to meet it's range criteria for east to west crossings of the USA. As a result, only 37 were made. Interestingly enough, several 990s continued to be operated by private owners and NASA operated two for decades after the last one was phased out of commercial service. Only 65 880s were produced from 1959 to 1962. The aircraft was designed to be smaller and faster than the DC-8 and 707 - this market did not develop, however, and if it did it could have been served with less expensive designs.

Pegasus Messerschmitt Me-109H V1 (W.Nr. 15708), 1/72, 2015

Multimedia Model Kit,   Box Condition: Exc

$34   

Limited issue - one of 2000 produced. Very nicely molded fine recessed panel line injection molded main parts with excellent cast white metal details, full decals and extensive information on painting the 109H V1. The kit has never been started. Internal factory sealed bag including decals and instructions.

Phoenix Slingsby 3, 1/72, P7

Vacuform Model Kit,   Box Condition: Exc

$24   

Features very high quality moldings with fine recessed and raised detail and pre-shaped strut material. This kit has not been started and has been inventoried complete with all parts. Not recommended for builders who are not experienced with vacuform kits.

Aurora AT-6 Texan, 1/48, 70-69

Plastic Model Kit,   Box Condition: VG+

$135   

From 1956. Rare first issue of this classic kit. Has early rectangular logo "Aurora Line" logo. Molded in silver and clear plastic. Includes the correct early rectangular clear base Aurora stand, the correct instructions showing this base, and the correct early Tatem decals which Aurora issued without a stand decal. (Aurora issued stand decals with kits with the introduction of the triangular 'world' base style clear stand. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions.

Aurora Cutty Sark Clipper Ship, 1/260, 432-198

Plastic Model Kit,   Box Condition: Sealed NM

$79   

Still factory sealed. Nicely molded smaller scale full hull kit. Kit features molded rat lines, detailed deck and fittings, display stand and rigging instructions.

Airfix Hawker Typhoon - Craftmaster Issue, 1/72, 10-39

Plastic Model Kit,   Box Condition: VG-

$22   

Very colorful and interesting Craftmaster artwork issue. The kit has never been started. Inventoried 100% complete including decals and instructions.

Aurora Martin B-26 Marauder, 1/46, 371-259

Plastic Model Kit,   Box Condition: VG

$325   

Very rare first issue from the early 1950s. When Aurora moved to the West Hempstead plant, they planned a series of very large scale bombers. All kits released up to this time had been small. Aurora's instincts were correct, and the B-26, B-25 and B-29 were a big sales success. This box art was done by Jim Cox and was only used for about one year, making it very rare. The kit has never been started and is inventoried 100% complete with the original tissue paper, all parts, large clear stand, instructions and decals. The box has very good color, four solid corners (no repairs), no fading, stains or tears and no price tags or tape (other than the factory sealing tape). It does have moderate general wear as shown, a small (3/4" x 3/8") price tag tear on the left short side, edge wear (more on the on the left than the right) and litho chips on the top long side along the edge.

Aurora Curtiss Hawk P-6E, 1/43, 116-100

Plastic Model Kit,   Box Condition: Sealed Mint

$110   

Still factory sealed. The kit is dated 1958, but this is obviously a later issue as the Aurora logo does not say 'Famous Fighters' in the border and has no sunburst. Due to the 100 price extension, it is most likely from 1960 or '61.

Pocher Alfa Romeo 8C-2300 Monza 1931, 1/8, K71

Multimedia Model Kit,   Box Condition: Sealed Exc+

$1200   

This kit is still factory sealed in the clear cello wrap but the seal has splits. Pocher made the finest automobile models ever created. The detail and working parts on these long out-of-production, big 1/8 scale kits is amazing. This kit has 1954 parts of plastic, brass, steel, leather, iron, rubber, copper and many other material. Working features include operating steering, working suspension, lights that operate from the dashboard, doors that open and close with operating door latches and handles, starting handle that operates the crankshaft, connecting rods, pistons, V-belts, Fan, dynamo and more in the engine and much more. Recommended for experienced modelers only. This is the desirable early version with the most realistic wheel construction. Each wheel is built just like a real spoke wheel with individual spokes and well over 100 parts each. Shipping insurance (and Express Mail for international customers) is required.