Rareplane MFA IA-58 Pucara - (IA/58) - Bagged, 1/72
Vacuform Model Kit, Box Condition: Sealed
$16
Still factory sealed. Very high quality vacuform kit with moldings better than many older injection molded models. Features very fine raised detail, clear canopies and instructions/plans as well as paint and marking guide. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.
Airmodel North American AJ-1 Savage - Bagged, 1/72, 161
Vacuform Model Kit, Box Condition: Sealed
$18
Still factory sealed. Features very crisp and well detailed vacfurom moldings with recessed panel lines, clear canopy (still in mint condition and not yellowed) and numerous injection molded details on two sprue. With plans/instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Contrail Vickers Valiant B.1 - RAF 148 Sq And 49 Sq, 1/72
Vacuform Model Kit, Box Condition: Sealed NM
$32
Still factory sealed. This is a large and well detailed vac kit which includes some injection molded details. Decals are included for two aircraft.
Airmodel Lockheed JetStar C-140, 1/72, 192
Vacuform Model Kit, Box Condition: Sealed NM
$14
Hard-to-find model of the famous early four-engine turbojet civil executive transport. Before the Gulfstream Grumman GII, the Jetstar was one of very few luxury options for corporations with a global network. The C-140 was the USAF designation for the utility transport variant. Well molded with recessed detail. The clear canopy is included and in mint condition and not yellowed. Never started and inventoried complete with all parts and includes plans/instructions. This is a basic vac kit; scratchbuilding skills required.
Airmodel General Dynamics RF-57F Canberra Conversion - Bagged, 1/72, 190
Vacuform Model Kit, Box Condition: Sealed NM
$16
Still factory sealed. Very well molded vac kit with very fine recessed panel lines, white main airframe parts and clear canopy (in mint condition and not yellowed). This is the extra long wingspan Canberra with powerful main fan engines, two additional auxiliary jet engines and very high altitude performance. Airmodel recommends the Frog or Airfix Canberra kits to help complete this model. Only the basic airframe parts are included with this model. Vacuform model kits are not for beginners. Special skills such as scratch building are required. To successfully build this kit you will need to have prior experience with vacuform kits.
Airmodel Fairchild C-123 Provider - Bagged, 1/72, 206
Vacuform Model Kit, Box Condition: Sealed NM
$16
Basic vacuform kit with clear canopy. Nicely molded with recessed panel lines. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Rareplane Henschel HS-126, 1/72
Vacuform Model Kit, Box Condition: Sealed NM
$8
Still factory bag sealed. Very highly detailed and well molded vacuform kit which features fine surface detail, full cockpit & crew stations & clear canopy (in perfect condition an not yellowed). Includes full size, multi-view painting and marking guide and full instructions.
Rareplane Lavochkin LA-5 FN - (LA-5FN), 1/72
Vacuform Model Kit, Box Condition: Sealed NM
$6
Still in the factory sealed bag. Very well molded vacuform kit with better mold quality than some injection molded models. Features fine surface detail, full interior and more. The clear canopy is in mint condition and not yellowed. Includes a full-size, multi-view paint and markings guide. Molded in white and clear plastic.
Airmodel North American AJ-1 Savage - Bagged, 1/72, 161
Vacuform Model Kit, Box Condition: Sealed NM
$16
Very crisp and well detailed vacuform moldings with recessed panel lines. Includes a clear canopy in excellent condition (not yellowed). Complete and never started. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Red Hurricane Yakovlev Yak-25 Flashlight A, 1/72, 7201
Vacuform Model Kit, Box Condition: Good-
$34
Still the only injection-molded kit of the early Flashlight 'A' variant. Features fine recessed surface detail, 'good' cockpit, full landing gear and more. Includes paint guide and decals for both kits listed. Never started. The parts are either inventoried complete or still in the internal factory sealed bag. Includes decals and instructions. The box side shows that the company did some good homework on the This aircraft and a very nice history of the Yak-25 is included. There was some confusion in the translation as that state that in the specifications for the Yak-25 that "The new plane had to be present in the combat area for a long time and it had to be able to destroy the forget in the day or at night, under all weather conditions." Hopefully it could also destroy the forget at dawn or dusk.
Welsh Vickers VC-10 K.Mk3/4 Tanker, 1/144, PJW56
Vacuform Model Kit, Box Condition: Exc
$20
Very high quality vac kit with 24 finely cast metal details. Never started. The small parts are still in the factory sealed bags. The big parts were never sealed and have been inventoried complete including RAF decals and instructions.
Welsh Vickers Super VC-10 - East African Airlines, 1/144, SL38
Vacuform Model Kit, Box Condition: Exc++
$22
Very high quality vac kit with cast metal details. Never started. The small parts are still in the factory sealed bags. The big parts were never sealed and have been inventoried complete including very large & colorful 'East African' decals and instructions.
Welsh Boeing 737-330 Lufthansa or Condor - (737), 1/144, SL43
Vacuform Model Kit, Box Condition: VG
$20
Very high quality injection molded / metal and vacuform kit with metal details and full decals. Features injection molded wings, engine pods and stabilizers, vac fuselage, metal struts, engine cowls, fans, nose and main gear wells, wheels and gear doors. The kit has never been started. All small parts still in the factory sealed bags. The large parts were never factory sealed have been inventoried complete including decals and instructions.
Aeroclub Spitfire Mk.14 / FXIVc Conversion - Bagged, 1/72
Vacuform Model Kit, Box Condition: Sealed
$16
Still factory sealed. Limited run conversion that makes a Spitfire FXIVc from the Airfix or Heller early Spitfire kits. Includes vac fuselage, many cast metal parts and clear canopy.
Execuform McDonnell F2H-3/4 Banshee - Bagged - (F2H3 F2H4), 1/72
Vacuform Model Kit, Box Condition: Sealed
$10
Still factory staple sealed. Basic vacuform kit. Never started. Complete with vacuform main parts, detailed plans, clear parts and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Formaplane Rogozarski IK-3 - WWII Yugoslavian Fighter - Bagged, 1/72, C5
Vacuform Model Kit, Box Condition: Sealed
$16
Bagged kit that is still factory sealed. Very high quality vacuform kit from about 1987. Features recessed panel line detail and raised detail were appropriate, full cockpit, optional position landing gear, prop and clear canopy. Vacuform kits are not recommended for modelers who do not have experience building them.
Broplan PZL P-1/II - 1st Version - Bagged (P.1/II P-1), 1/72, MS-48
Vacuform Model Kit, Box Condition: Sealed
$45
Rare and the only model of this aircraft. The 1st version of the PZL P.1 had a 600hp Hispano Suiza inverted V 12 cylinder water-cooled engine and a fixed pitch 2 blade metal propeller. This is a classic, high-quality vacuform by Janusz Brozek from Gdansk, Poland. Includes very high quality main airframe vacuform parts (of better quality than many injection molded kits), extensive injection molded plastic details on several trees, detailed multi-view painting guide and full instructions. The paint scheme provided had no national markings or manufacturer's markings, so naturally Broplan did not provide decals as they were not needed.
Airmodel TBM-3 R / TBM-3 U / TBM-3 W / AD-4 W (AEW 1) Conversion Set - Bagged, 1/72, 109
Vacuform Model Kit, Box Condition: Sealed
$16
Contains parts to do the listed conversions on any 1/72 Avenger or Skyraider kit. Never used and complete. Conversion kits require a base injection molded kit (not included) to complete. This is a basic conversion only - some scratchbuilding is required.
Airmodel DFS-228 V1, 1/72, AM114
Vacuform Model Kit, Box Condition: Sealed
$19
Basic vac kit. Very nicely molded with recessed detail. This kit has not been started and has been inventoried complete with all parts. Not recommended for builders who are not experienced with vacuform kits.
Airmodel Gloster Meteor F8 Conversion - (For Frog Kit) - Bagged, 1/72, 144
Vacuform Model Kit, Box Condition: Sealed
$6
Nicely done conversion kit designed for the classic and readily available Frog Meteor. Never started. Complete with all parts and instructions.