Carl Goldberg Models The Ultimate Wing Kit - 54 Inch Wingspan, K-93
Wood Model Kit, Box Condition: Sealed Good-
$69
Still factory tape sealed. Please note that this the deluxe Carl Goldberg wing kit only for the 54 inch wingspan 'Ultimate' and not the complete aircraft kit. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Balsa USA Northstar - Land Or Seaplane 44 Inch Wingspan R/C Aircraft, 455
Wood and Plastic Model Kit, Box Condition: Sealed VG
$195
Still factory sealed and rare. This very unique design has landing gear and is also an seaplane...or it can take off and land on snow! This model can do every maneuver that a conventional model can do except spin. It will also do one maneuver that conventional models do not do - a controlled vertical descent. Features full size plans, fully formed landing gear, die-cut balsa parts, premium quality hardwood and plywood parts, quality AAA grade balsa, complete hardware package, and more. The new and revised (for this issue) 36 page instruction manual has over 150 photos and illustrations that leaves nothing to change. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Robbe Balance Motor Glider - 63 Inch Wingspan R/C Aircraft, 3173
Wood and Plastic Model Kit, Box Condition: Exc
$265
Very Rare. This is a highly prefabricated motor-glider model that includes a plastic fuselage with all necessary holds and cuttings done (down to the nose for perfectly pre-defined thrust angle), anodized aluminum tail boom, factory-built wings with main sparts of pine wood, factory-built tail feathers, electric motor and mount, 6x6" folding propeller, spinner and motor switch unit, very complete R/C hardware pack, light-weight vacuformed canopy (still factory sealed and in superb condition), extensive, full color decal (sticker) sheet and more. Never started. Inside, the kit is exactly as it left the factory. Robbe sealed most of the parts in clear bags; those parts are still factory sealed. The very few parts that were never sealed are inventoried complete. Includes all paperwork. The heavily illustrated and large instruction book is in German, English and other languages as well.
Balsa USA 30 Inch Wood Floats - For R/C Aircraft
Wood Model Kit, Box Condition: Good-
$38
This box contains a kit of two 30" long wood floats. Features die-cut wood parts, full instructions and more. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Sure Flite All Foam Floats With Fibreglassed Bottom And Spray Rails - 28 Inch Long For R/C Aircraft
Other Materials, Box Condition: Good
$36
This box contains a set of 28" long injection molded foam floats. The Bottom and Spray Rails have been fiberglassed; the total weight per pair which includes spruce spars and fly plywood attachment tabs is 8 ounces. Capacity is up to 5.5 pounds. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Gee Bee MkIV Float - 33 Inch Long Floats For R/C Aircraft
Plastic Model Kit, Box Condition: VG
$36
This box contains a set of 33" long floats that are completely assembled and ready to mount (not a kit). They will attach to any conventional landing gear or you can assembly your own strut assembly to attach them to. These floats work equally well in water or snow and can be attached and removed in less than 3 minutes; includes mounting bolts and spreader bars. Made from a very lightweight (and hollow) plastic, they are strong & durable and will not puncture in a ground landing. The plastic is paintable. The kit has never been started. The small parts are still in the factory sealed bag; the larger parts that were never sealed have been inventoried complete and includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply and an invoice will emailed to you for that.
Dumas Swamp Buggy Everglades Airboat - 28 Inches Long / 10 Inch Beam / For .19 Engines, 1/8, 1501
Wood and Metal Model Kit, Box Condition: Sealed Exc
$65
Still factory sealed. This Chuck Welch design is easy-to-build and good performer. Features aircraft-grade plywood, plans, full instructions and more. NOTE: this kit was factory-packed in a very sturdy, thick and heavy cardboard box. It will be shipped simply wrapped in heavy brown paper. You can specify that it be boxed if you wish, but additional shipping charges will apply.
SIG Deweybird 1/2A Control Line Model - 22.5 inch Wingspan .049 Engine Flying Model, CL-15
Wood Model Kit, Box Condition: Sealed Exc+
$56
Still factory sealed. The popular Deweybird is an easy to build model and makes a fine first flying model kit. Can be flown as a trainer or sport flyer. Features formed landing gear, di-cut fuselage, wings & tail, formed pushrods, nylon bellcrank & hardware, decals and step by step plans.
SIG Thermal Dart - Frank Ehlings No.2 Model - 24 Inch Wingspan Rubber-Powered Free Flight Aircraft - For Beginners, FF-12
Wood Model Kit, Box Condition: Sealed VG
$20
Still factory sealed. This model is a is a perfect introduction to rubber free flight. The popular design is easy to build, forgiving and a very good flyer. It includes all parts and is stick and tissue construction but a solid motor stick.
Mania THREE Mitsubishi Type 99 Ki-53 Sonia And THREE Type 97 Ki-27 Nate, 1/72, 01-800
Plastic Model Kit, Box Condition: VG
$32
SALE!! Includes all 6 kits in the 2 boxes shown. NOTE: Sold AS-IS and not inventoried. This collector was very meticulous and of his thousands of kits that I did inventory, 95% are complete. But on these kits he cut the sprue (trees) with the part numbers still attached to each number, so the parts are loose. Because of that, I have not inventoried these kits. NOTE: he built minor sub assemblies (cockpit tubs, wing halves, etc.) to 'professional' quality. Again, these kits are sold not inventoried and AS IS hence the very low price.
Aoshima Mitsubishi Ki-67 Hiryu Peggy Bombers - Two Kits, 1/144, 4
Plastic Model Kit, Box Condition: Good+
$24
Contains two complete Peggy bombers. Very nicely detailed and features very fine raised panel lines, finely molded parts, clear windshield, side blisters, turrets & observation windows, rotating wheels & propellers and more. Includes decals for two aircraft. The model has not been started. Inventoried 100% complete with all parts, decals and instructions.
Hasegawa OV-10A Bronco - US Marines Forward Air Controller, 1/72, AT14
Plastic Model Kit, Box Condition: Exc
$22
Limited edition with special decals for the aircraft on the box art. Never started and inventoried complete with all parts and includes decals and instructions.
Hasegawa Morane Saulnier D-3800 - Swiss Air Force MS-406, 1/72, AP116
Plastic Model Kit, Box Condition: Exc++
$19
A fine model of the Swiss-built MS-406 which served into the 1950s. Very nicely detailed and molded kit features all fine recessed panel lines, very good cockpit and more. With decals and paint guide for the box art aircraft. NOTE: this kit has very minor, 'professional' quality subassembly as follows: seat and control stick to floor. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Unicraft Focke-Wulf FW-281 - Focke-Wulf Project VIII Turboprop Fighter - (FW.281), 1/72
Resin Model Kit, Box Condition: Sealed NM
$35
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit. The Focke-Wulf FW-281 was one of many of the Ta.183 projects. It resembled the previous P.VII type but the major difference was the turboprop HeS021 engine which provided the combined power of the nose propeller (driven through a long shaft) and the tailpipe exhaust. This project may have reached an advanced stage of development since it was assigned FW-281 and no "P" prefix.
Unicraft Junkers SFP, 1/72
Resin Model Kit, Box Condition: Sealed NM
$39
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Unicraft Dornier Do P.59 - (Do P59), 1/72
Resin Model Kit, Box Condition: Sealed NM
$49
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Unicraft Bolkhovitinov Spartak - Soviet WWII High Speed Bomber, 1/72
Resin Model Kit, Box Condition: Sealed Exc
$56
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Unicraft Tupolev Tu-91 Boot / Bychok, 1/72
Resin Model Kit, Box Condition: Sealed Exc
$38
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Hasegawa F/A-18 A/C Hornet World Hornet - RAAF Australia / Spanish Air Force / Swiss Air Force, 1/72, DT120
Plastic Model Kit, Box Condition: Exc
$20
Dated 1995. Very nicely detailed kit with 82 pieces featuring all fine recessed panel lines, good cockpit detail, optional position canopy, pilot boarding ladder, optional position speed brake, detailed gear and gear wells, drop tanks and more. With decals and paint guide for the three air forces listed. Never started. The parts are either still in the factory sealed bags or inventoried 100% complete with all pieces. Includes decals and instructions.
Tamiya M3 Lee Tank, 1/35, MM139
Plastic Model Kit, Box Condition: Good+
$29
Very nicely detailed and molded armor kit. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.