Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Lockheed X-17 Re-Entry Research Missile - 'S' Kit, 1/40, H1810-79

Plastic Model Kit,   Box Condition: Exc

$185   

Rare 1957 first and only issue of this important test vehicle for studying re-entry of ICBM warheads. Features three separating stages, launch pad, crew and tracking instruments. Never started. 100% complete with all parts/decals and instructions. The box is in 'excellent' condition with like-new color and gloss, four solid corners, no repairs, no tape (other than the factory sealing tape, of course) and no rips, missing litho, fading or stains. Flaws include very light wear, a light crease at the upper right and the original price tag from "Rogers Toy Stores" on the upper short side panel.

Revell North American X-15 - 'S' Issue, 1/65, H198-89

Plastic Model Kit,   Box Condition: Exc

$155   

First issue from 1958. From the stunning artwork on this kit, it is clear to see why these models are considered the pinnacle of box art and why they are so collectible today. This is a finely molded and well detailed kit for that time and features removable canopy and detailed engine, pilot figure, landing gear and retractable landing skid, movable control surfaces & dive brakes and more. Includes Revell's famous round-based 'Globe' swivel stand, a separate, full size color and marking sheet with four views; there is even an excellent history of the aircraft. Never started. 100% inventoried complete with all parts, decals and instructions present. The box displays better than the rating, but that is because there is some minor litho chipping and moderate edge wear, especially on the left side corners.

Dynaflite Bird of Time Open Class Competition Glider - 118 Inch Wingspan R/C Sailplane - By Marks Models

Wood and Plastic Model Kit,   Box Condition: Exc

$200   

This design features die-cut balsa and plywood parts, many factory-cut balsa parts, wood stock as required, excellent full-size plans and and a highly detailed text instruction manual. Inside, the kit is exactly as it left the factory. It is never started and the parts that were factory sealed are still in the clear sealed bags. The larger parts were never sealed and are inventoried complete. Includes all paperwork. NOTE: this kit came from the factory in a very heavy and sturdy cardboard box. Unless you specify otherwise, this kit will be wrapped in heavy brown paper and shipped exactly like that (without an external box). If you choose to have it boxed, please note that in the comments during checkout or email me after placing the order. Additional shipping charges will apply if the kits is boxed and I will email you a corrected invoice.

Revell Aerojet-General Aerobee Hi, 1/40, H1814

Plastic Model Kit,   Box Condition: Sealed NM

$44   

Still factory sealed. 1996 reissue of the 1950s classic "S" kit. Has movable firing arm with working piston and cylinder, movable wheels, tow bar and detailed crew figures.

Monogram Grumman TBF Avenger - Torpedo Bomber Four Star Issue, 1/48, PA31-149

Plastic Model Kit,   Box Condition: VG+

$74   

First issue hardbox from 1958 and part of an incredibly popular line of Monogram 1/48 scale WWII aircraft. This classic kit features wings that fold properly as on the real aircraft, retractable landing gear, opening bomb bay doors and dropping torpedo, elevating machine gun & rotating turret, rotating propeller & wheels, chocks, pilot, gunner, two ground crew figures and more. Molded in gloss dark blue and clear plastic. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Revell Chance Vought Cutlass F7U-3 with Sparrow Missiles - Lodela Issue - (F7U3), 1/59, H171

Plastic Model Kit,   Box Condition: Good++

$38   

One-piece Lodela issue, likely from the 1960s. This kit is from the 'S' molds but has the AIM-7 Sparrow missiles and missile pylons added. The kit has never been started. The parts are either still in the factory sealed bag or iInventoried 100% complete including decals and instructions.

Revell Admiral Hipper Heavy Cruiser, 1/720, H490

Plastic Model Kit,   Box Condition: Sealed Exc

$40   

Still factory sealed. 974 issue with fantastic box art. Can be built waterline or full hull with complete prop and rudder detail. Features detailed deck and superstructure, rotating main 8" turrets, six dual AA gun mounts, three rangefinders, cranes, gun directors, searchlights, AR-196 floatplane and more.

Revell CSS Alabama - Civil War Raider, 1/96, 5621

Plastic Model Kit,   Box Condition: Good-

$275   

Dated 1988 and from the original high-quality molds. This large-scale model measures 33 inches long and 18 inches tall when assembled. Features preformed ratlines, metal anchor chain and cord for running and standing rigging, 20 crew members, detailed armament, operating propeller hoist and detailed deck fittings. Also includes complete step by step assembly instructions and full rigging instructions/diagrams. Inside, the kit has not been started. All small parts are still in factory sealed bags; the hull was never sealed. Includes building and rigging instructions in 'excellent' condition. The sails are in well-above average 'excellent' condition (not perfect but above average).

Revell HMS King George V British Battleship, 1/568, H380

Plastic Model Kit,   Box Condition: Good

$64   

1974 issue with great box art and a very good model for that time. Features Walrus float plane, rotating cranes, rotating turrets and elevating guns, detailed secondary and AA guns and more. Includes display stand. Never started. Inventoried 100% complete with all parts, decals, color flag sheet flag sheet and instructions present.

Revell Destroyer USS The Sullivans - Early Fletcher Class DD-537 - Pre 'S' Issue, 1/301, H305-129

Plastic Model Kit,   Box Condition: Good++

$79   

1954 Pre-'S' release and among Revell's very earliest ship models. This issue is the 'all gun' version of the Fletcher with the maximum main armament; Revell soon modified the molds to represent the later ships of the class. This is an excellent full hull model for that time and features separately molded superstructure, main, 40mm and 20mm guns, ships boats, gun directors, search lights and more. The kit has never been started. Inventoried and it is 100% complete with all parts, color flag sheet, decals and instructions.

Revell P&O SS Oriana Ocean Liner, 1/493, H376-298

Plastic Model Kit,   Box Condition: VG

$129   

This is a 2006 reissue of the original 1961 kit. The model is 20 inches long, full hull and well detailed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The Oriana was a very famous P&O Orient Liner. In December 1962, in fog off San Diego, Oriana collided with CV-33 USS Kearsarge, causing considerable damage to both vessels. A claims court found Oriana's captain had been steaming too fast for conditions. Afterwards, the CV was good-naturedly nicknamed "The Mighty Kay-runch."

Revell CV-61 USS Ranger Aircraft Carrier - Picture Fleet Issue, 1/542, H360

Plastic Model Kit,   Box Condition: Fair+

$125   

1971 Picture Fleet issue with John Steel artwork. This full-hull model features complete propeller & rudder detail, movable cranes, optional position elevators, an airwing of 16 aircraft & helicopters, 11 tow trucks, mobile deck crane, 10-5" guns, gun directors, lifeboats, detailed island structure with radar & sensors and more. Never started. Inventoried with all ship parts present and instructions. NOTE: missing decals; superior replacements can be purchased at https://www.starfighter-decals.com/. The instructions are from the Revell Saratoga; the two kits are 100% identical, so they work perfect for assembly.

UPC M-40 155mm Self-Propelled Gun - (ex Adams), 1/40, 2151-200

Plastic Model Kit,   Box Condition: Good

$65   

Universal Powermaster reissue of the 1957 Adams 'Action Model' that is amazingly well detailed for that time. Features rotating, elevating and recoiling gun, working track and hatches, hinged platform that opens and closes, working extension ramp, crew and much more. Never started. The parts are still in the internal factory sealed bag and includes decals and instructions. This kit has a fascinating history. After Adams became disillusioned with plastic model kit production (perhaps partially due to Revell's founder), they sold most if not all of the molds to Athearn, the famous craftsman train kit manufacturer. Athearn reissued many of the kits under the SNAP name, which caused a great deal of confusion. Many thought they were snap-together kits; they couldn't have been more wrong. Athearn did a simple modification to each mold; where it would say ADAMS (usually on a part or area that did not show), they machined that away and put the SNAP logo. At some point Athearn stopped production and eventually sold the molds. However, during this time in the 1960s, UPC decided to reissue many of these kits. Evidently Athearn did the molding or a job shop did, while UPC produced their own boxes, instructions and decals. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers (many in Japan) and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.

AMT Bell 222 - California Highway Patrol, 1/48, 8681

Plastic Model Kit,   Box Condition: Sealed VG+

$54   

Still factory sealed and from 1991. AMT's quarter-scale '222 has become even more popular and hard-to-find. It features over 70 pieces, detailed cockpit and cabin interior, optional position landing gear, movable rotor blades, CHIPs decals and more.

Aoshima HMS Victorious Aircraft Carrier, 1/700, WLA109

Plastic Model Kit,   Box Condition: Exc

$32   

Very highly detailed waterline model which includes air wing. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Inpact Hawker Fury, 1/48, P202

Plastic Model Kit,   Box Condition: Good

$24   

This large 1/48 kit is well molded with many parts and fine detail. It features realistic subtle cloth texture on the areas covered by fabric and a smooth surface on metal sections, good cockpit and engine, rigging thread and more. With a clear display stand and very colorful decals for the box art aircraft. Never started. Inventoried and NOTE: missing one minor part, (1) horizontal stabilizer brace. Easily made from pulled sprue or stock plastic. Otherwise includes all other parts, decals and instructions.

Revell Corporal Missile With Transporter, 1/40, 85-7852

Plastic Model Kit,   Box Condition: VG+

$38   

2010 reissue of the venerable large-scale 'S' kit from the 1950s. The model has excellent overall detail and features the Corporal Missile and transporter-erector/launcher that functions like the real one. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell TWO Polikarpov I-16, 1/72, H635-50

Plastic Model Kit,   Box Condition: Good

$39   

SALE!! Includes two kits in the one box shown. Both models are never started and inventoried 100% complete with all parts, decals and instructions present. 1964 two piece box issue with great frameable Brian Knight artwork. Features optional position (extended or retracted) landing gear, pilot figure, clear canopy, detailed engine with removable cowling, rotating wheels and propeller and USSR markings.

Revell Hawker Tempest, 1/72, H620-49

Plastic Model Kit,   Box Condition: VG++

$28   

1963 true first issue with the 49 cent price extension and two piece box with frameable artwork. Features optional position landing gear, movable propeller and wheels, pilot, clear canopy and RAF markings. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Mach 2 SO-9050 Trident French Jet-Rocket Aircraft, 1/72

Plastic Model Kit,   Box Condition: VG++

$28   

Specialty injection molded kit with colored and clear parts, assembly plans and full color decals. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.