Wood Model Kit, Box Condition: Sealed VG
$55
Still factory sealed. Big-scale kit can be built for static display or flown .049 to .15 U-Control, gas free flight or rubber power. Features quality die-cut balsa parts and stripwood, scale wheels and flexible landing gear, movable ailerons, rudder and elevator, plastic cowl and cockpit deck, scale prop, two machine guns, pilot figure, very large full color decals, covering material and more. Includes full size detailed plans. Guillow's founder, Paul K. Guillow, was a WWI naval aviator. In 1926 he began producing wooden model airplane kits. His 'Shelf Models' were some of the earlier non-flying models in production. Guillow's grew during the model boom of the 1930s, and when the Depression hit the hardest, Guillow's responded with lower prices and became one of the low price leaders, frequently advertising in Model Airplane News and other leading publications. During the war, like most manufacturers, Guillow's was forced to alternative materials such as cardboard and pine. Guillow's survived the post WWII slump by creating many inexpensive profile flying rubber powered aircraft and gliders in the 1950s (along with North Pacific) which became famous - some are still available today. The stick and tissue lines have been updated with laser cut parts and are still in production as of 2009.
Plastic Model Kit, Box Condition: Exc+
$26
Excellent injection molded model that is well detailed inside and out. Features all fine recessed panel lines, very good cockpit, enclosed and detailed gear wells and more. Includes painting guide and decals for two different aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Multimedia Model Kit, Box Condition: Good-
$44
Sells brand-new on the Guillow's website for $131.99 + shipping. Very large stick and tissue kit that can be built to fly rubber, gas free flight or U-Control, RC or for scale display. Features retractable landing gear (main and tail wheel), cockpit interior, opening canopy, movable flaps, ailerons, rudder and elevator, complete bomb, drop tank and rocket load and more. Has high quality die-cut balsa, balsa stock as needed, die-cut plywood, completely finished wooden prop, hardware, a very large number of vacuformed plastic parts including a pilot, clear vac canopy, cardstock interior details, other wood and metal stock as needed, full instructions, full size plans and more. The kit has never been started. Inside, it is as it left the factory. The parts that were sealed are still in the factory sealed bags; the parts that were never sealed have been inventoried complete. Includes 'excellent' condition decals and instructions.
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale and includes many brass PE details. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale and includes many brass PE details. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$18
Made in the Ukraine and highly detailed for this scale. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: VG
$16
Made in the Ukraine and highly detailed for this scale. Never started and inventoried complete with all parts and includes instructions.
Plastic Model Kit, Box Condition: Exc
$24
High quality model from new molds. Features all fine recessed panel lines, PE details, very good cockpit, injection molded canopy, detailed gear wells and more. Includes 4-view color paint guide and decals for the two aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$32
Incredibly well detailed inside and out. This model features over 210 pieces, full interior with optional position rear doors, two frets of PE parts, flexible tracks, a full load of 28cm rockets or optional 32cm projectiles and much more. Includes a full color paint guide and markings for three different vehicles. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed NM
$26
Still factory sealed. Incredibly well detailed inside and out. This model includes the vehicle and gun and features over 150 pieces, full interior with optional position rear doors, towing parts for the gun and vehicle, finely reproduced gun stays and hand wheels, armored shield with rivet detail, one-piece 7.5cm Pak with hollow muzzle made by slide mold, optional 'action' or 'stowed' gun trails and much more. Includes a full color paint guide and markings for two different vehicles.
Plastic Model Kit, Box Condition: Exc
$18
Incredibly well detailed inside and out. This model features over 140 pieces, multiple frets of PE parts, flexible tracks, full interior with optional position rear doors, opened or closed vision ports, opened or closed engine hatches and much more. Includes a full color paint guide and decals. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$16
Incredibly well detailed inside and out. This model features over 180 pieces, brass PE parts, flexible tracks, detailed gun area interior and much more. Includes a full color paint guide and decals for 6 different tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$20
Incredibly well detailed inside and out. This model features 218 pieces, brass PE parts, flexible tracks, one-piece return rollers from new tooling, all new muffler assembly, opened or closed hatch, correct MG mount with shield, early production gun mantlet and correct muzzle brake, optional periscope on commander's hatch, optional side skirt armor in PE brass, two-piece bogies (the outer parts are the rubber wheels to simply painting) and much more. Includes a full color paint guide and decals for 7 different tanks. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$26
Limited issue kit that cleanly molded, highly detailed and features all recessed surface detail, high-definition resin details, good cockpit, optional position canopy and more. Includes full color paint guide. Never started and inventoried complete with all parts and includes decals and instructions. The Göppingen Go 9 was a German research aircraft built to investigate the practicalities of powering a plane using a pusher propeller located far from the engine and turned by a long drive shaft. In 1937, Claudius Dornier observed that adding extra engines and propellers to an aircraft in an attempt to increase speed would also attract a penalty of greater drag, especially when placing two or more engines within nacelles mounted on the wings. He reasoned that this penalty could be minimized by mounting a second propeller at the rear of an aircraft. In order to prevent tail-heaviness, however, the engine would need to be mounted much closer to the center of gravity (forward). Dornier patented this idea and decided to build a test aircraft to evaluate it. The aircraft was designed by Dr Ulrich Hütter as a 40% sized, scaled-down version of the Dornier Do 17's fuselage and wing panels without the twin-engine nacelles and built by Schempp-Hirth. The airframe was entirely of wood and used a retractable tricycle landing gear – one of the earliest non-Heinkel-built German airframe designs to do so. Power was supplied by a Hirth HM 60 air-cooled, inverted inline four-cylinder engine mounted within the fuselage near the wings. Other than the engine installation, the only other unusual feature of the aircraft was its all-new, full four-surface cruciform tail, which included a large ventral fin/rudder unit of equal area to the dorsal surface. Initially towed aloft, flight tests began in June 1941, but later flights operated under its own power. The design validated Dornier's ideas, and he went ahead with his original plan to build a high-performance aircraft with propellers at the front and rear, resulting in the amazing Dornier Do 335. The final fate of the Gö 9 is not known.
Plastic Model Kit, Box Condition: Sealed NM
$18
Still factory sealed. Nicely detailed kit with photoetched details and decals for the two aircraft listed.
Plastic Model Kit, Box Condition: VG
$24
Features cockpit detail, optional position cabin doors and detailed rotor head. Contains markings for both Air Forces and a total of 6 helicopters. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The first Sycamore flew in 1947 and deliveries continued until 1957. This very successful design was in use well into the 1970s. Detailed interior and Scale Master Decals for six British Army Machines and one Australian squadron.
Plastic Model Kit, Box Condition: Sealed Exc++
$18
Factory sealed. Features Scale-Master decals for four British, two Swiss and one Venezuelan Aircraft. FB.4 was the last and best version of the venerable Venom, which was one of the world's first jet aircraft specializing in ground attack.
Multimedia Model Kit, Box Condition: Fair
$22
Hard-to-find multimedia kit that features all fine recessed panel lines, many high-definition resin parts (including engines), PE details, film instruments, very good cockpit, fully enclosed & detailed main landing gear wells and more. Includes 4-view paint guide and decals for all three aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions. Please NOTE that the box top is in 'good' condition but it is graded 'fair' because the box tray (the bottom) is missing. I have made a substitute tray from cardboard to protect the kit during shipping.
Multimedia Model Kit, Box Condition: VG
$18
SALE!! Includes both 1/48 scale kits in their original boxes. The Avia B-35 has injection molded details and vacuformed main airframe parts. Never started and inventoried complete with all parts present and includes decals and instructions. The Bu-131 (Aero C-104) is a completely injection molded model in large 1/48 scale version. It has been inventoried 100% complete with all parts, decals and instructions present. NOTE: this kit has very minor 'professional' quality subassembly as noted: wheels halves are built. The typical molding sink marks in the right fuselage half are professionally filled and sanded. There is no other work done.
Plastic Model Kit, Box Condition: Sealed Exc+
$28
Still factory sealed. This model is a quality, limited issue kit of the two-seat '190 trainer. It features all very fine recessed panel lines, photo etched details, film instruments, very good dual cockpits, optional parts for S-8 or S-5 variants and more. Includes paint guide and decals for both aircraft listed.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243