Sweet US PSP Pierced Steel Planking Mat - Marston Matting, 1/144, 20
Plastic Model Kit, Box Condition: Exc
$22
Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale. This model is a very finely molded Marston Matting display for up to four single-engined 1/144 aircraft. Never started. The parts are either inventoried 100% complete or still in the internal factory sealed bags and includes instructions.
Sweet Macchi MC-200, 1/144, 14101
Plastic Model Kit, Box Condition: Exc
$24
Sweet Aviation Models are perhaps the finest and most detailed kits ever produced in 1/144 scale. This model features two complete aircraft kits with very fine recessed panel lines. There is a large and extensive decal sheet for several different aircraft and even a full color painting guide on the back of the box. Never started. The parts are still in the internal factory sealed bags. Includes decals and instructions. NOTE: the instructions are high-quality photocopies from the Sweet C-200 Tropical Version. The original instructions are missing; but the original paint guide is present because it is on the back and inside of the box.
Scale Flight Megow Vultee A-1A / Comet Miller Racer / American Modelcraft Boeing P-26A Dime Scale Flying Aircraft AND Megow S-7 Curtiss Condor Transport Solid Scale Model, Dime
Wood Model Kit, Box Condition: VG
$29
SALE!! Includes all four reproductions of 1930s wooden kits. There are three stick and tissue flying models and one solid scale model. All are never started and have the small parts still factory sealed while all other parts are inventoried complete. Includes all paperwork. On the flying Models, the Megow V-1A has a 12" wingspan, the Comet Miller Racer has a 10" wingspan and the Boeing P-26A has a 16" wingspan. The solid (non-flying) Megow Curtiss Condor has a 8" wingspan, 2D cut fuselage, completely carved and finished engine nacelles, printwood, wood stock and high quality replica plans of the original model, which is from 1933. Complete and never started. Scale Flight Model Company in Bloomington, Indiana, USA was dedicated to releasing authentic reproductions of the finest "Dime Scale" flying model (stick and tissue) kits, solid kits an even an occasional vehicle model from the 1930s/40s. Dime Scale models used to sell for a dime in the 1930's, hence the name. They are actually box scale, but as a general guideline, they usually had a wingspan of 16 inches and have simple and light construction. "Dime Scale" models are now a class flown in some competitions. Kit consists of contest grade printwood, contest quality strip wood, machine cut balsa propeller, the best Japanese tissue, wooden wheels, competition bushed nose plug, brass thrust washers, prop shaft, prop freewheeler, FAI rubber strip motor and a copy of a genuine dime scale plan that was used in the 1930s-1940s.
SIG SIG Cub - 23.5 Inch Wingspan Freeflight Aircraft, FF-1
Wood Model Kit, Box Condition: Sealed Good+
$24
Still factory sealed but the box top has faded. This kit is a very good performer and capable of long distance/high endurance flights. Features die-cut quality balsa wood, stripwood and other wood stock as needed, metal hardware, rubber motor, plastic propeller, very lightweight plastic wheels, covering tissue (made in Japan), full sized plans and SIGs excellent illustrated instructions.
Special Hobby Nieuport 11 Bebe French Aces - Pilot Lt. Paul Tarascon Esc N62 12 Kills / Lt. Pierre Dufaur de Gavardie Esc N12 6 Kills / Lt. Jean M.D. Navarre Esc N67 12 Kills, 1/32, SH32015
Plastic Model Kit, Box Condition: Exc+
$58
Excellent and highly detailed kit. Features injection molded parts with numerous resin and many photoetched details, excellent cockpit & gas tank, very well detailed engine, separately molded elevators and ailerons, choice of propeller types and more. Includes rigging diagrams, full color paint guide and decals for the aircraft listed. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Supermodel TWO Aermacchi MB-326K - Italy / South Africa, 1/72, 10-012
Plastic Model Kit, Box Condition: Exc
$28
SALE!! Includes two complete model kits in one box. Nicely molded and detailed kit with fine raised panel lines and recessed control surface lines. Features some cockpit detail, wing tip drop tanks, optional position canopy and speed brake, underwing drop tanks and rocket pods and markings for all both air forces. SALE!! Includes two models in one box. Ideal builder kits, please read carefully for the condition. NOTE: these models have 'professional' quality subassembly as follows: Kit #1- wing halves assembled and ear bays + intake/exhaust neatly painted. There is no other assembly. Kit #2- the same as kit #1 plus the seat is built and the two main gear doors are installed in the 'up' position. There is no other assembly. Inventoried complete and includes decals and instructions.
UPC F-105 Thunderchief i (ex Marusan), 1/105, 7036-49
Plastic Model Kit, Box Condition: Exc
$16
Small scale kit from the 1960s and ex-Marusan molds. Older but nicely molded model features clear canopy and full landing gear as well as full color decals. Never started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
UPC USMC Winnie the Whale LVT(A)(4) with 75mm Gun - (ex Adams), 1/40, 2157-200
Plastic Model Kit, Box Condition: VG
$65
UPC early to mid 1960s issue from the original high quality Adams molds. This very well detailed model features movable tracks and wheels, rotating turret and machine gun, elevating 75mm gun, four man crew with two infantrymen. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s. These molds must have had a very interesting history. The molds were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Adams never issued the kit. The famous HO model train manufacturer Athearn purchased the Adams molds and ended up with the jeep. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name & logo to a part (or two) of each kit. Then UPC (Universal Power Master) either leased or purchased (probably the former) the Adams molds from SNAP in the 1960s. While most UPC kits say 'Made in Japan' the ex-Adams models do not and say 'Made in USA'. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
UPC M1 120mm Anti-Aircraft Gun Tillie The Toiler - With Mount & 8 Wheel Trailer (ex Adams), 1/40, 2156-250
Plastic Model Kit, Box Condition: Good
$55
From high quality Adams molds. While Scott Edison (of Revell "S" artwork fame) did almost all of the UPC artwork, this one was done by the equally famous Roy Grinnell. This is a very highly detailed and well molded kit that features a 120mm AA gun that recoils, elevates and swivels, has operating hinged platforms and gun trails, removable jack floats and limber, four man crew and more. Never started and inventoried with all plastic gun parts present and instructions. NOTE: missing decals and four figures. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
Unknown Twin Mustang F-82F - USAF 52nd FG Siamese Lady / 68th F(AW) SG USAF, 1/72, FG0082
Plastic Model Kit, Box Condition: Good+
$24
Unusual 1/72 scale F-82F from an unknown Russian or USSR manufacturer. This is a well molded kit that includes very fine raised panel lines, injection molded clear canopies, full landing gear, drop tanks, underwing rockets and much more. Has decals for both aircraft on a very large and extensive sheet with red USAF markings and stencils, white and red national insignia, white and yellow stripes, white and yellow stars in three different sizes and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
UPC Long Tom And Tractor - (Long Tom 155mm Gun And High Speed Tractor - (ex Revell ex Life-Like), 1/40, 2155-200
Plastic Model Kit, Box Condition: VG
$79
A very rare model from the original 1950s Revell "S" issue molds. This is the very first UPC issue and uses the Revell Gift Set box art that included this kit and others. Highly detailed and includes both kits - the High Speed Tractor and the Long Tom 155mm gun. Has many working features - the tractor has movable tracks and working bogies, rotating and elevating machine gun, driver and interior details. The gun can be stowed for transport with the M-4 and all extra gear to do this correctly is supplied. The Long Tom features and elevating barrel, moving limbers and detailed mechanism. NOTE: this kit has minor and 'professional' quality subassembly to four pieces: tractor bottom, sides and rear. There is no other assembly. Inventoried and 100% complete with all parts and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s. These molds must have had a very interesting history. The molds were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Adams never issued the kit. The famous HO model train manufacturer Athearn purchased the Adams molds and ended up with the jeep. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name & logo to a part (or two) of each kit. Then UPC (Universal Power Master) either leased or purchased (probably the former) the Adams molds from SNAP in the 1960s. While most UPC kits say 'Made in Japan' the ex-Adams models do not and say 'Made in USA'. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.
Todays Hobbies F-4E Phantom II - Flying Glider For Catapult Or Static Display, 1/24, J-5
Wood and Plastic Model Kit, Box Condition: Sealed NM
$46
Still factory sealed. This is a large, very well detailed model featuring die-cut wood, light vacuformed plastic details, clear canopy, factory-cut spars and stringers, balsa block and other stock wood as required, complete decals and more. Can be made to fly as a catapult-launched glider.
Testors Mil Mi-28 Havoc Gunship, 1/72, 636
Plastic Model Kit, Box Condition: Sealed Exc+
$14
Still factory sealed. Well detailed with over 70 pieces, full cockpits, five blade rotor assembly with all linkage and actuators, nose turret, weapons loadout and more.
Unicraft Focke-Wulf FW.P.127 - (P127), 1/72
Resin Model Kit, Box Condition: Sealed NM
$38
Still factory tape sealed. Rare model of this advanced German design. Nicely detailed, limited-run resin kit.
Unicraft Dornier P.247 - (DoP247 / P-247), 1/72
Resin Model Kit, Box Condition: Sealed NM
$46
Still factory tape sealed. Very rare model of this advanced German design. Nicely detailed, limited-run resin kit.
Unicraft Focke-Wulf P.V/3 - The Alternative Huckebein - (FWPV3), 1/72
Resin Model Kit, Box Condition: Sealed NM
$35
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit.
Unicraft Bisnovat Samolyot 5-2 - Soviet Skyrocket Bisnovat 5, 1/72
Resin Model Kit, Box Condition: Sealed NM
$32
Still factory tape sealed. Rare. Nicely detailed, limited-run resin kit. The Samolyot 5-2 (or Bisnovat 5) was a Russian manned rocketplane. Bisnovat was assigned the project to develop an all-Soviet equivalent to the 346 supersonic rocketplane being developed by the German Roessing team in OKB-2.Status: canceled 1949. Thrust: 19.60 kN (4,406 lbf). Gross mass: 3,400 kg (7,400 lb). Unfueled weight: 1,900 kg (4,100 lb). Height: 9.92 m (32.54 ft). Span: 6.60 m (21.60 ft).Like the 346, the 5 was a swept-wing aircraft, but about 2/3 the size. First glide flight by A K Pakhomov, dropped from a Pe-8, came on 14 July 1948. The first 5-1 aircraft was destroyed on its third flight 5 September 1948. The 5-2 second aircraft, with RD-2M3BF rocket engine installed, made its first flight on 26 January 1949. After five unpowered flights, the program was cancelled in June 1949. By that time better-funded turbojet-powered fighter prototypes were already achieving the 1200 km/hr top speed of the 5. Biesnovat and Isayev would elaborate the design in unmanned form into the supersonic R-1 air-to-surface missile.
Cromwell Models Tiger II Prototype Conversion Kit - Ferdinand Tiger Prototype, 1/35, VK4502
Resin Model Kit, Box Condition: Fair
$48
Rare. Highly detailed conversion kit cast in high definition resin that features new hull, new turret, optional position hatches and more. Never started. Inventoried and NOTE: missing gun barrel (but includes turret base for gun and flash suppressor). Easily replaced with the plastic donor kit barrel or an aftermarket aluminum barrel. Otherwise includes all other parts and instructions. Please note this is a conversion kit only; a base kit is required but not furnished. Cromwell recommends the Italeri 1/35 as the base kit.
Cromwell Models Flak 41 And Sondergafarstell, 1/35, CK103
Resin Model Kit, Box Condition: Good
$64
Rare and includes both models: Flak 41 and vehicle. Never started. The parts are still in the internal factory sealed bags and includes instructions.
Special Hobby Fairey Firefly Mk.1 Home Fleet - Plus BarracudaCast WWII Era Wheels / And Firefly Post War Wheels / Eduard Mask, 1/48, SH48131
Plastic Model Kit, Box Condition: Exc
$38
Includes factory sealed BarracudaCast #BARBR48003 Resin Firefly Wheelset WII Treadless 5 Slot Main Wheels and also #BR48004 Firefly Resin Wheelset Post WWII Boocktread 4 slot 32" wheels for Mk.I and any post-war Barracuda. There is also a Eduard EX424 Firefly MkI masket set designed for this model and still factory sealed. The actual kit is a well detailed, limited release which features all fine recessed panel lines, cast resin details, superb cockpit including all crew stations, excellent gear well details and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.