Plastic Model Kits
Arii USS Nautilus SSN571 Nuclear Submarine, AR116-D100
Plastic Model Kit, Box Condition: VG
$69
Very rare; not even listed in John Burn's guide. Small scale kit that measures about 6.6 inches long when assembled. The kit is basic, featuring only 10 plastic parts. It is also designed for motorized operation, and comes with a big slow-rpm prop, rubber motor and torpedo-shaped weight holder and weight that hang from the bottom when you wish to operate it. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. The instructions are on the bottom of the box top.
Aurora Atomic Submarine Nautilus SS571, 1/242, 500-98
Plastic Model Kit, Box Condition: Exc
$179
Rare, Brooklyn-produced, early 1950s U-Ma-Kit. This was Aurora's first naval model. Molded in the correct glossy very dark gray plastic and includes a display stand and decals to match the box art. Never started and complete with all parts, 'very good++' condition decals and 'near mint' instructions. The box has excellent color, four solid corners with no repairs, no fading and no price tags. The only tape is the factory sealing tape on the long sides. There is a light grease pencil price at the top center as shown and general shelf/edge wear.
Microscale YF-102 (Prototype F-102 Delta Dagger), 1/60, MS4-4
Plastic Model Kit, Box Condition: Sealed NM
$95
Still factory sealed. Ex-Allyn molds. Rare kit showing the original subsonic configuration of the prototype F-102 before the Area Rule 'Coke Bottle' fuselage. With two decal sheets and stand. Aircraft builds to in-flight configuration and includes display stand.
Hobby-Time Sealed Factory Case of 12 Bell XV-3 US Army Convertiplane, 1/43, 901-98c
Plastic Model Kit, Box Condition: Sealed Exc
$635
This is a factory-sealed case of 12 Hobby-XV-3 model kits from the 1950s. Hobby-Time shipped them to the address on the box, and I purchased them from the man at that address. The case has never been opened and is still securely sealed top and bottom with the factory tape. The box is in 'excellent' condition. The actual model kits (12 inside the case!) are the one and only issue of this amazing aircraft. This is a very nice kit for that time with fine raised panel lines, interior detail and molded in gloss silver and clear.
Pyro IJN Musashi Battleship - Table Top Navy, 1/1200, C392-50
Plastic Model Kit, Box Condition: Good
$22
Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded turrets, stacks, many superstructure parts and more. The kit has never been started. It has been inventoried complete with all parts and instructions. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.
Varney US Navy Fleet Submarine, 1/240
Plastic Model Kit, Box Condition: Exc+
$1100
This model is a landmark in the history of Plastic Kits. The Varney Fleet Sub is the primary candidate for the first all-plastic ship kit made in the USA. The famous HO/O train manufacture, Varney, branched out into other scale model kits at the end of WWII. In late 1945, they introduced what are thought to be the first USA produced plastic model kits - the Fleet Sub and the PT-17 Stearman. Both kits were excellent scale models given the state of modeling at that time. However, Varney was 6 years too early. The Fleet Sub and PT-17 met a cool reception when it was introduced to retailers. Hobby Shops were not sure if it would sell, and did not know how to sell it. Consequently, most retailers would not order it and those who did put them where they were not seen by the public. Distributors stopped carry the kits due to a lack of reporders. The result was inevitable - they did not sell, and Varney pulled both kits from production very quickly. Varney was committed to cutting the molds on the LST and it was released in 1946 with the same result. That marked the end of Varney's venture into non-train scale plastic models. Varney dedicated all production to HO trains and in the late 1940s they sold the molds for the Fleet Sub, the LST and the PT-17 to O-Lin. The molds underwent modification (the hull was divided into two parts instead of one) and were released by O-Lin and Lindberg. This kit is a superb, investment-grade "excellent++" example. The box top has like-new color and gloss, four solid corners with no repairs, no tape or price tags, no marks from tape or tags and no tears or other litho damage. Flaws include very light and even edge wear (as shown), very slight 'dishing' inward and very light foxing on two box sides. Inside, the kit is still as it came from the factory. The yellow parts display is 'very good++' and the only flaw is the scuffing as shown. The small parts bag is still factory sealed and factory stapled to the yellow display. The glass display stand arm is tucked into its holder. The heavy one-piece molded hull is beautiful and in rare crack-free condition and cradled into the holder. The base was factory glued to the yellow display but has come loose. It also includes the unused factory tube of Testors cement in its own holder. Very large instruction sheet is near mint and folds out to illustrate construction and offers numerous display ideas for this new medium in hobby kits. Decals were not provided with the kit. This kit was made with gray injection molded details, glass stand arm and black injection molded stand and sub hull. I have seen versions with no paint on the base and hull; however, this one has the base and hull factory painted gray. The paint is in 'near mint' condition on the hull and 'excellent' on the stand base. A rare example of a classic kit. Shipped with insurance only.
Kemziv Antonov AN-2M - (ex-MEE), 1/50
Plastic Model Kit, Box Condition: Good
$69
Rare and likely from the late 1970s. One of at least two Kemziv issues, and probably the earliest of the two known. Large almost 1/48 scale kit of the popular and successful AN-2, the world's largest single engined biplane. The model has never been started and all parts are still sealed in the factory 'krinkle' clear plastic bags. Includes color insignia sheet and full instructions. The insignia are CCCP and Aeroflot for a civil AN-2 transport. This model is the Ex-MEE 1/50 AN-2 kit that was sold as a built up display model and a kit. Production ended at MEE in about 1984. Some molds passed to Genton at that point, and obviously Kemziv got them at some point. Thanks to Tom Marino for help on this.
Revell F-105B Thunderchief - 'S' Issue, 1/75, H285-89
Plastic Model Kit, Box Condition: Exc
$89
1958 first issue with dramatic hardbox artwork. The box has excellent color and gloss. Features optional position landing gear, movable wheels, four bombs, pilot figure and hinged cockpit canopy and refueling probe. The kit has never been started. Inventoried 100% complete including decals and instructions.
Airmodel Dornier Do-217 K-1 Conversion, 1/72
Plastic Model Kit, Box Condition: Exc
$14
Injection molded conversion has new nose section molded in clear, full instructions and paint guide with listed colors. Never started and complete with all parts and instructions. Conversion kits require a base injection molded kit to complete (the Airfix kit is recommended for this one). Parts included are for the conversion only. Some scratchbuilding may be required.
Life-Like 1936 Ford Roadster - (ex-Pyro), 1/32, 09288
Plastic Model Kit, Box Condition: Sealed Exc+
$32
Still factory sealed. 1970s Life-Like issue from original 1960s Pyro molds. Features detailed molded chassis underside with separately molded front and rear suspension, complete interior, top boot or top in the 'up' position and rear trunk mounted spare tire. In the early to mid 1960s the Pyro company chose many of its kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Pyro stated that it can be converted to a 'road racing' or slot car.
Airfix Focke-Wulf FW-190D - Craftmaster Issue, 1/72, 1223-50
Plastic Model Kit, Box Condition: Exc
$24
1960s issue in the larger format box with black box sides. The smaller box is kit #6-39. A well-holed and damaged FW makes a hasty power-off landing in this dramatic box art. The emergency vehicles race down the runway ready to douse the flaming engine. The pilot has the canopy open to clear the smoke or to make a hasty exit...or both. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Aurora De Haviland DH-10 Bomber, 1/48, 125-198
Plastic Model Kit, Box Condition: Exc+
$125
Dated 1957 with classic Jo Kotula box art. This is the edition with the '198' price circle in the upper right and no Parent's Magazine approval seal. Box is in 'excellent+' condition with like new color and gloss, four solid corners and no tape or price tags. Flaws include very, very light wear and creasing. Molded in gloss olive drab and clear. Never started. Inventoried 100% complete with all parts, decals and instructions. Even includes the original tissue packing paper.
Yunyj Tyechinik Yakovlev Yak-18 II Light Acrobatic Aircraft - Bagged, 1/40
Plastic Model Kit, Box Condition: Exc+
$18
Classic Cold War kit in large 1/40 scale. Features fine raised panel lines, pilot figure, 'in flight' configuration and decals. Molded in gray, white and clear. The kit has not been started. NOTE: missing prop retainer and display stand. Inventoried with all other parts, decals and instructions. I believe this is a 'Yunyj Tyechinik' release and not the earlier MZMPI. This company succeeded MZMPI (which was the first kit manufacturer in the USSR) and continued till a new name was introduced in the mid 1970s. Yak-18s have been observed in service with the North Korean air force as recently as August 2018.
Aurora Regulus II Guided Missile with Launcher, 1/48, 378-249
Plastic Model Kit, Box Condition: VG
$379
1958 release of this kit featuring classic Jo Kotula boxart. The large 1/48 scale missile comes with a fully operational scale launcher. The hardbox has 'very good' color and gloss, four solid corners, no price tag or tape tears and no torn or missing litho. Flaws include general wear and edge and corner wear as shown. The kit has never been started and is factory new inside right down to the original tissue packing paper. Aurora factory sealed the silver parts and the red missile parts; these are both still sealed. The deep blue parts were not sealed but have been inventoried 100% complete. Includes decals and instructions in 'excellent' condition. This kit must be shipped insured. The Aurora "Missile Line" is legendary. In the late 1950s, the first missile model kits sold briskly, so Aurora and Revell both planned extensive lines. However, the missile modeling craze disappeared as quickly as it started. Models that were in the works were canceled or completed if they were far enough along. Those that were completed were fine efforts but sold poorly and had very short lives, making them rare collector items today.
Merlin Models Kawasaki Ki-32 Mary, 1/72, 3
Plastic Model Kit, Box Condition: VG
$9
Basic injection molded kit with decals and instructions. The kit has never been started. NOTE: missing vacuform clear canopy. Otherwise inventoried with all other parts, instructions and decals.
Pegasus Fairey Fulmar Mk.I or Mk.II & Airwaves Detail Set - Fleet Air Arm or USAAF - Bagged, 1/72, 3002
Plastic Model Kit, Box Condition: VG
$28
Includes factory-sealed Airwaves AC7261 Fairy Fulmar super detail set with brass PE parts. The actual model is the limited edition that builds either variant. Features all injection molded main parts with recessed panel lines, metal details, injection molded clear canopy and decals for either version. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Farpro Seiran Type 11 M6A1 Submarine Floatplane - (ex-Aoshima), 1/72, 105
Plastic Model Kit, Box Condition: Good-
$20
From Aoshima molds. Features working ailerons, crew of two and beaching stand. Molded in medium blue and clear. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Farpro existed for a short time in the late 1960s. All the kits were all made in Japan by Aoshima but specifically for US distribution. Some kits had provision for motorization and some did not.
Aurora De Havilland Tiger Moth, 1/48, 110-79
Plastic Model Kit, Box Condition: Sealed VG
$70
Still factory sealed but the seal has split on the bottom and left, and the box has damage as shown on the left. First issue dated 1958 with brilliant Jo Kotula box artwork. This was a very nice kit for that time.
Kader Vickers Viscount BEA - British European Airways, 1/121, 393
Plastic Model Kit, Box Condition: Good
$36
Ex-Lincoln molds. Very close to 1/144 scale. Good detail and complete decals including all pin stripes. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Box has a stain on the bottom tray- outside only. All parts, decals and instructions are 'excellent' and undamaged.
Kader Douglas DC-7 - BOAC, 1/150, 395
Plastic Model Kit, Box Condition: Good
$44
Ex-Lincoln molds. Very close to 1/144 scale. Good detail and complete decals including all pin stripes. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.