Plastic Model Kits
KP Sukhoi Su-25K Frogfoot, 1/72, KP030
Plastic Model Kit, Box Condition: Good
$16
Nicely molded kit. Includes full underwing stores and decals for Czech and Soviet (USSR) Air Forces as well as a variety of aircraft numbers to code your model any way that you wish. Never started. It has been inventoried complete with all parts and includes decals and instructions.
MPC Dodge D-50 Pickup Truck, 1/25, Q1-10753
Plastic Model Kit, Box Condition: Sealed Exc
$54
Still factory sealed. Dated 1980. Can be built stock or custom with many optional parts such as roll bar, sun roof, rear bucket seats, custom wheels, etc. Includes opening hood, detailed engine with optional turbocharger, and more. Molded in color, clear, chrome and rubber.
Sanwa B-26D Invader Bomber - (A-26 / A/B-26), 1/110, 514
Plastic Model Kit, Box Condition: Sealed Exc-
$58
Still factory sealed. Dates from the early 1960s and very hard to find. The scale is approximate. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. There was even a cut away 727 in big 1/96 scale and an Airport Set with a Cessna 180 and Bell 47D Helicotoper. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.
Faller Noratlas 2501 Motorized - Luftwaffe, 1/100, 1501
Plastic Model Kit, Box Condition: Good
$55
Rare kit from the 1960s designed for dual electric motor drive with the Faller no. 1001 Miniature Electric Motor (not furnished; Faller sold the motor separately). Nicely molded for the time featuring rotating propellers, positionable ailerons, rudders and elevator, optional position rear boarding door and forward crew boarding door, rear drive-on boarding ramp, clear side and cockpit windows and more. The kit has never been started. The small and motorizing specific parts are still in the internal factory sealed bag. The other parts were never sealed and have been inventoried complete including decals and instructions.
Aurora British Churchill Tank, 1/48, 327
Plastic Model Kit, Box Condition: Sealed NM
$95
Still factory sealed. 1972 Big A softbox issue is in investment-grade condition. Features elevating gun, rotating turret, figures, operating treads and bogies and battlefield display stand.
Faller Junkers Ju-87 Stuka Motorized - Dive Bomber or Anti-Tank, 1/100, 1087
Plastic Model Kit, Box Condition: VG
$55
Rare model kit from the early 1960s and nicely molded for that time. It is designed to be motorized with the Faller No. 1001 Miniature Electric Motor (not included, Faller sold it separately.) Features parts to built either version, cockpit with crew of two and rear machine gun, wing cannon, main centerline bomb load, small wing-mounted bombs and a large decal sheet for multiple aircraft. Molded in a stunning swirl green and butterscotch brown, gray, orange-yellow, red and with clear canopy & display stand. The kit has never been started. The small parts (with motorizing-specific parts) are still in the factory sealed bag. The parts that were never factory sealed have been inventoried complete, including decals and instructions. Even the Faller packing quality inspection slip is still present.
Nichimo Mitsubishi A6M5 Reisen Zero Type 52, 1/48, S-4803-200
Plastic Model Kit, Box Condition: Good-
$24
Early to mid 1960s model with collectible high-gloss box art. Nicely molded and detailed for that time with fine recessed panel lines and fine raised rivet detail. Features retractable landing gear and closing gear doors, very nice cockpit detail with side panels and other cockpit equipment, moving rudder, elevator, ailerons and wing flaps, three piece canopy, drop tank, excellent full color painting guide and decals for several aircraft. The model as never been started. Inventoried and NOTE: missing one small part, ADF loop antenna. Otherwise complete with all other parts, decals and instructions present.
Pegasus Supermarine Spitfire F22/24 - 603 'City of Edinburgh' Sqn 1950 - Bagged, 1/72, 002
Plastic Model Kit, Box Condition: Sealed
$16
Still factory sealed. Limited edition injection kit. Features very nice moldings with fine recessed panel lines and full decals.
AMT 1965 Buick Riviera 3 in 1 Kit Movie 'Villa Riviera' George Barris, 1/25, 6555-200
Plastic Model Kit, Box Condition: Fair
$125
Early issue hardbox. Legendary AMT 3 in 1 kit can be built stock, custom or competition. George Barris served as the AMT consultant for the customized kits, and designed and built the 'Movie Car of the Year' for the movie Villa Riviera. This model will build the stock, Barris Custom or Barris' movie version. Model includes numerous optional parts for suspension, motor, exterior and interior as well as custom decals. Includes a special clear display stand also. Molded in white, clear and chrome with rubber tires and metal axles. Never started. Inventoried 100% complete with all parts, vinyl material, decals and instructions. NOTE: box looks better than the 'fair' grade but it is graded that low because there is a large stain and box damage to the lower left long side and short left side of the box top. Additionally, there is identical damage to the tray (lower box) and I would grade it 'fair-.' NOTE: the instructions have only very minor bug damage but the decals have significant damage and are only 70% intact (about 30% destroyed).
Airfix Dornier Do-217 E.2 - Craftmaster Issue, 1/72, 1402-100
Plastic Model Kit, Box Condition: Good++
$24
Action-packed artwork shows a British fighter in a hot gun battle with the main Do-217, which is receiving major damage. Another Do-217 released its bomb load, while the starboard wing on another snaps away in flames as the crew hits the silk. Kit features movable elevators, rudders and ailerons, elevating gun and rotating turret, cockpit detail, four crew members and rotating wheels and props. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Revell Documented Arizona Factory Display Owned By Esther Ross, Who Christened The USS Arizona
Plastic Model Kit, Box Condition: VG
$3800
An incredibly rare, documented, one-of-a-kind piece of history in amazing investment-grade collector condition. For the very advanced collector of unique military history and model kits. This Revell Factory Model was originally owned by Mrs. Esther Ross Wassell, who earlier was Miss Esther Ross who christened the USS Arizona in New York on June 19, 1915. She went on to play a very key role in the creation of the USS Arizona Memorial. Thanks to newspaper reports, we know that her father, William Ross, was a prominent pharmacist in Prescott, Arizona. He and his friends convinced Gov. Hunt to choose his daughter from the other 100 applicants anxious to do the honors. It turned out to be a wise choice reasons no one could foresee. Miss Ross took the task of launching the world's most powerful battleship very seriously. She practiced her duties every day after school for months, smashing syrup bottles full of water against a fence behind the house. Miss Ross was popular and well respected in Prescott. Even the Associated Press reported that she "was one of the prettiest girls in the state." A special train took Gov. Hunt, Miss Ross, her family and others to New York for the event. Although the applause for the then unpopular Gov. Hunt, the cheering for Miss Ross was "heard for miles." Page 1 of the Prescott Journal Miner, June 20th, 1915, reported that at the Brooklyn Navy Yard Miss Ross cried "I dub thee Arizona," and "Not a hitch or sign of accident marred the success of the launching." "This is the proudest moment of my life," she stated, "and I am most intensely gratified at the magnificent demonstration that my friends and the city of Prescott has given me." Sometime after the launching ceremony, Miss Ross married Mr. Arthur Wassell and became Mrs. Esther Ross Wassell. She saw the horror of World War II and the disaster of the Arizona touched her deeply. After the war, she joined the drive to create a memorial over the ship to the 1177 sailors entombed in her. She joined the Arizona Memorial Committee which raised all the funds needed to build the Arizona Memorial. She served on the staff and toured the USA giving numerous media interviews and key speeches for the fund raising. Out of gratitude, the USS Arizona Memorial Committee ordered a special Revell Factory Display USS Arizona for her. It came with two specially affixed small Fleet Reserve and Arizona Committee signs (shown in the photos) on the right side; these special markings are only found on the rare "appreciation gift" factory displays from the Arizona Memorial Committee members to important fundraisers. The model was shipped to her in Los Angeles. You can see the original "Arizona Memorial Committee" mailing label that has her full name and address, documenting that it was her model. Esther treasured this gift and kept it in remarkable and very complete condition. Included is the original shipping box in "very good++" condition with all the original shipping tape, all the original internal special cardboard packing material, the model ship in exceptional condition, the cardboard display base(complete but with small tears and very light wear as shown), the colorful backdrop (with wear and slight tears as shown, missing one lower tab), the original display assembly instructions and even an original fund raising card from the Arizona memorial campaign. This display, box and all materials were always in a climate controlled environment. The colors on the cardboard display are in stunning, factory-new condition. The instructions for the display are 'excellent.' The ship is 100% complete and the factory paint is in exceptional condition. Even the factory rigging and all flags are intact. There is very little dust on the ship; it appears to be in 'not displayed' condition; but I know it was displayed for a short time because of the small tears and one tab on the cardboard display backdrop (see photos), which were probably due to putting it up and taking it down. I have only found one repair; the jackstaff broke and was neatly repaired at some point. The factory shipping box still has all the original tape and very little wear for that age. The original Arizona Memorial Committee shipping label is in 'very good' shape. Due to it being on the bottom of the shipping box, it does have some wear, but all the writing can be clearly read with slight magnification. This piece passed to Esther's daughter, who gave it to a friend who then gave it to another friend. The later friend is wife to an OMK customer, who sold me the model. This kit must be shipped insured and I may require it shipped by special courier.
Hobby-Time Sealed Factory Case of 12 Bell XV-3 US Army Convertiplane, 1/43, 901-98c
Plastic Model Kit, Box Condition: Sealed Good
$545
This is a factory-sealed case of 12 Hobby-XV-3 model kits from the 1950s. Hobby-Time shipped them to the address on the box, and I purchased them from the man at that address. The case has never been opened and is still securely sealed top and bottom with the factory tape. The box is in 'excellent' condition. The actual model kits (12 inside the case!) are the one and only issue of this amazing aircraft. This is a very nice kit for that time with fine raised panel lines, interior detail and molded in gloss silver and clear.
UPC Kawasaki Ki-61 Hien 'Tony' (ex-Fujimi), 1/70, 8016-49
Plastic Model Kit, Box Condition: Exc
$16
From older but quality Fujimi molds and with box art by Scott Eidson. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s.
Monogram Ford F-150 Ranger Pickup Truck - (F150), 1/24, 2262
Plastic Model Kit, Box Condition: Fair
$36
This kit is dated 1980. Very nicely detailed featuring full engine, excellent engine compartment and opening hood, detailed chassis with two or four wheel drive driveline & differential, opening tail gate, optional bed cover, detailed interior and more. Molded in gloss red, clear and chrome plate with rubber tires. NOTE: this kit has minor and neat assembly. The long block (engine 1/2, intake, heads and exhaust manifolds) are built to 'professional' quality. The two bed inner walls are assembled to 'excellent++' quality. There is no other assembly and zero painting. It has been inventoried complete with all parts and includes decals and instructions. Although the box has bug damage, the decals and instructions are in 'excellent++' condition. Before you use any older kit decals, please read the articles (located on this website) about saving old kit decals.
Varney US Navy Fleet Submarine - The First Plastic US Ship Model, 1/240
Plastic Model Kit, Box Condition: Good+
$795
This model is a landmark in the history of Plastic Kits. The Varney Fleet Sub is the primary candidate for the first all-plastic ship kit made in the USA. The famous HO/O train manufacture, Varney, branched out into other scale model kits at the end of WWII. In late 1945, they introduced what are thought to be the first USA produced plastic model kits - the Fleet Sub and the PT-17 Stearman. Both kits were excellent scale models given the state of modeling at that time. However, Varney was 6 years too early. The Fleet Sub and PT-17 met a cool reception when it was introduced to retailers. Hobby Shops were not sure if it would sell, and did not know how to sell it. Consequently, most retailers would not order it and those who did put them where they were not seen by the public. Distributors stopped carrying the kits due to a lack of re-orders. The result was inevitable - they did not sell, and Varney pulled both kits from production very quickly. Varney was committed to cutting the molds on the LST and it was released in 1946 with the same result. That marked the end of Varney's venture into "non-train" scale plastic models. Varney dedicated all production to HO trains and in the late 1940s they sold the molds for the Fleet Sub, the LST and the PT-17 to O-Lin. The molds underwent modification (the hull was divided into two parts instead of one) and it was released by O-Lin and later Lindberg. This kit is a a very nice, never started and complete example. The box top grades 'good+' and has nice color as shown, general light stains and wear, three solid corners and one closed split corner. Three sides are as nice as the top, with one small piece of clear tape on both long sides. The right short side does have a 3/4" x 1/2" tape tear but is fine beside that . Inside, it is complete. The yellow parts display is intact and in 'good-' condition. The original krinkle small parts bag is present but split open; I have included the bag and all parts are inventoried complete. The original glue is present but the tube shattered; I have put it in a zip lock. The stand was glued to the yellow at the factory; the glue has come off. The factory glass rectangle for the stand arm is still present and in it's holder. The heavy one-piece molded hull is in rare crack-free condition and cradled into the holder. The base is in very good condition also. Very large instruction sheet is 'very good++' and folds out to illustrate construction and offers numerous display ideas for this new medium in hobby kits. Decals were not provided with the kit. This kit was made with gray injection molded details, glass stand arm and black injection molded stand and sub hull. I have seen versions with no paint on the base and hull; however, this one has the base and hull factory painted gray. The paint is in 'very good' condition on the hull and 'excellent' on the stand base. A rare example of a classic kit. Shipped with insurance only.
Premiere BAe Hawk T.Mk 1A Red Arrows, 1/48, P3102
Plastic Model Kit, Box Condition: Exc+
$26
Large scale 1/48 Hawk. Features colorful decals for any of 11 (10 flying aircraft and a spare) of the Red Arrows Display Team, detailed cockpit, optional position landing gear, AIM-9 Sidewinder missiles and optional gun pack. The model has not been started. Factory sealed bags with decals and instructions.
Revell F-84F Thunderstreak Pre 'S' Issue, 1/54, H215-79
Plastic Model Kit, Box Condition: Exc
$95
1955 Pre 'S' issue with dramatic box artwork. Kit features rotating wheels, cockpit and pilot detail, famous 'Revelving' clear globe stand and is molded in gloss silver and clear. Never started. 100% inventoried complete with all parts/decals and instructions present.
Airfix Bristol Beaufighter Craftmaster Issue, 1/72, 7-49
Plastic Model Kit, Box Condition: VG
$28
Purchased new on September 28, 1965 in Cleveland, Ohio. Very colorful box art of a Beaufigher making a low attack run on shipping. Kit includes torpedo and rocket load-outs. Never started. Inventoried and 100% complete with all parts, decals and instructions. Please NOTE the box looks better than the grade, but is graded 'very good' because there is a closed tear on one side. Craftmaster kits were made in the UK by Airfix and marketed by MPC in the USA.
Revell Douglas DC-7 Pan Am Airport Scene - 'S' Kit with Boarding Ramp / Stanchions / Gasoline Truck & Trailer / Tractor with 3 Baggage Carts / Aircraft Tractor and 7 Figures, 1/122, H257
Plastic Model Kit, Box Condition: Exc
$2200
Very, very rare, complete and 100% correct. The Pan Am Airport Scene was commissioned by Pan Am in the late 1950s and only sold through the airline, not through Revell distributors. This has made it one of the rarest Revell kits in existence. It is widely considered an 'S' kit since it was made at that time and features that style of artwork, but the box never had the yellow 'S' anywhere on it. It contains all the parts and markings listed in the title and makes an incredible airport diorama. The box has excellent color and gloss with no tears or stains. Three corners are solid - the other has been repaired very neatly with clear tape. There is general wear as shown but no other damage. Inside, the parts are as new. All pieces are in the correct gloss silver plastic with the clear Revell 'Swivel Base Display Stand.' The airport accessories are still sealed in the original factory bag, including the metal axles. The unique decal sheet for this special issue is intact, never cut and in 'good' condition. It contains Pan Am DC-7 decals and markings for the ground equipment. The decals are flat but have some yellowing and two creases. On the back they have the correct Revell markings and part number to be original for this model. The instructions are 100% correct and original for this model. They are in 'very good+' condition with the usual yellowing, two very small thin spots and one very light stain. In all, an excellent investment piece that has never been started with the airport parts bag sealed and otherwise inventoried complete with the correct decals and instructions. Please note that Revell did NOT issue this kit with paper 'carpet' like the United Airlines Flight 707 Airport Scene. The 'carpet' has been intentionally de-listed from the area of the box that describes the contents and has been removed from the instructions as well. Although this kit does not have an 'S' on it, I have included it as an 'S' kit since it is from that time frame and shares the common box art theme.
Kader Vickers Viscount BEA - British European Airways, 1/121, 393
Plastic Model Kit, Box Condition: Exc
$36
Ex-Lincoln molds. Very close to 1/144 scale. Good detail and complete decals including all pin stripes. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.