Plastic Model Kit, Box Condition: Exc+
$159
From late 1966. This is the very rare first issue and ever rarer in never started, 100% complete and in an 'excellent+' box. This kit was issued in late 1966 and is well detailed. It features parts for all three versions, a big block 427 with single or tri-power carb set ups, detailed engine compartment, opening hood, detailed chassis underside with separately molded suspension, shocks, springs, sway bar, drive shaft, differential and exhaust, full interior, decals and more. Molded in gloss white, clear, red-tinted clear, chrome plate and with rubber narrow whitewall tires (with narrow red lines on the back). The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Decals are flat, intact and in remarkable 'excellent++' condition while the instructions are 'excellent.' NOTE: there is a small tire burn on a sway bar and a burn on a muffler; fortunately, 90% of the burn is on the top (the unseen side) of the muffler.
Plastic Model Kit, Box Condition: Sealed VG++
$58
Still factory sealed. Rare original issue and very hard-to-find in this condition. Has more than 100 parts and fits any of the AMT tractor models. Features fully detailed F-2 Tandem suspension, operating 'Select-A-Point" sliding suspension, air brake system with flexible lines, mud guards, rear doors that open realistically, two position support assembly either 'raised' or lowered for static display and more. Molded in white, chrome plate, red-tinted clear and with rubber tires and metal axles.
Plastic Model Kit, Box Condition: Sealed VG+
$56
1970s issue that is still factory sealed. This model features detailed engine and engine compartment, opening hood, full interior with opening doors, positionable front wheels, stock and custom bumpers and headlight and more. Molded in colored plastic, clear, red-tinted clear, chrome plate and with rubber tires and metal axles.
Plastic Model Kit, Box Condition: Sealed VG
$46
Still factory sealed. Features full engine detail, transaxle assembly, removable hood, underside detail, complete interior and more.
Plastic Model Kit, Box Condition: Sealed Exc+
$42
Still factory sealed and the rare original 1979 issue; not the common reissue. Nicely detailed and can be built one of two ways; stock or competition. Competition version features full roll cage, tuned racing exhaust, Firestone 'Super Sports' hollow vinyl tires, Ferraro steering wheel, Recaro Racing Seat, racing air dam and grille, racing fender flares, BBS wheels and more.
Plastic Model Kit, Box Condition: VG+
$29
1970s T issue that can built one of two ways. Features detailed engine compartment and opening hood, full interior, detailed molded chassis, numerous custom parts and more. Never started. The parts that were factory sealed are still in the factory sealed bag. The parts that were never factory sealed (chrome & clear) have been inventoried complete. Includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$34
Very nicely detailed kit. Features 80 parts, detailed engine and compartment, underside and suspension and interior. Has opening hood, real rubber tires and optional ZR-1 decals. Molded in white, chrome, clear, red-tinted clear and with rubber tires. The model has not been started. The parts are either in factory sealed bag(s) or inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: VG
$59
Very large scale first-generation T-Bird features detachable hard top, 312CID Thunderbird Special engine with flexible ignition wires and hoses, detailed engine compartment, opening hood, complete interior, opening doors, underside driveline, suspension and exhaust, many optional parts for the custom version and decals for the custom version. Molded in light blue, chrome, clear, red tinted clear and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. NOTE: the decals are for the custom version only; they are flat and intact but have numerous stains on the backing paper. I would rate the decals as 'fair-'.
Plastic Model Kit, Box Condition: Sealed Exc
$49
Still factory sealed. 2009 reissue from original ERTL molds. Very highly detailed kit with over 250 parts and builds a complete rolling chassis just like the full-size truck. Features complete engine and engine compartment, tilting hood, detailed cab with complete interior, full suspension and underside details and more.
Plastic Model Kit, Box Condition: Sealed Exc++
$36
Still factory sealed. Recent reissue from the original molds of the rare 1970s model. Well detailed with over 130 parts, rubber tires, vinyl air hose, components designed to hitch to your choice of AMT tractor models, mud flaps and your choice of loads.
Plastic Model Kit, Box Condition: Sealed NM
$42
Still factory sealed. 2017 reissue from the original 1970s molds. Very highly detailed kit with over 280 pieces that features a rolling chassis build up just like the actual truck, full suspension & drive line, complete engine and engine compartment, tilting cab, detailed cab with complete interior, sleeper bed, optional sun visor, CB radio with antenna, roof running lights, dual horns, sliding fifth wheel, air deflector and more.
Plastic Model Kit, Box Condition: Sealed NM
$39
Still factory sealed. This is a modern reissue of this highly detailed kit.
Plastic Model Kit, Box Condition: Fair
$28
This very highly detailed model features more than 250 piecesm detailed Cummings 250 HP six-cylinder diesel, opening hood, detailed rolling chassis build up just like the real truck, 'Holland' sliding fifth wheel, full interior, optional accessories and more. The kit has never been started. The white parts are still in the factory sealed bags. The chrome and clear parts wew never factory sealed have been inventoried complete. Includes decals and instructions. NOTE: the box is intact but water damaged. The instructions have very light staining but are otherwise fine. The decals look 'very good' and are 100% intact; however, they may not work because they were exposed to moisture like the instructions were.
Plastic Model Kit, Box Condition: Sealed Exc+++
$44
Still factory sealed. This large-scale, highly detailed kit features a large number of pieces, rolling chassis build up like the real truck, detailed Ford 534 CID Super-Duty V8 engine, tilting cab, full suspension, complete interior, trailer with operating Todco overhead sliding door, Todco operating power tailgate, Spyder wheels, Kysor Air Conditioner and much more. Molded in white, chrome plated, clear, red-tinted clear, amber-tinted clear, metal axle and rubber tires. With a large and extensive Hostess Cake decal sheet.
Plastic Model Kit, Box Condition: Sealed Good
$48
Still factory sealed but the seal has shrunk and drawn the box top concave as shown. This reissue dated 2008 features more than 230 parts and measures more than 2.5 feet in length when built. Features two vans with authentic converter dolly with fifth wheel coupler for 'train' configuration, detailed suspension, TODCO overhead operating sliding doors, adjustable landing gear, hollow rubber tires and CF decals for your trailers AND a semi tractor.
Plastic Model Kit, Box Condition: Sealed Exc++
$38
Still factory sealed. Features over 160 parts and measures over 19 inches long when built. Fits any AMT tractor model. Very nicely detailed with two position supports, detailed suspension, spare tire, rim and tire carrier, pipe and valve detail and more.
Plastic Model Kit, Box Condition: Sealed Exc++
$32
Still factory sealed. Very well detailed kit of this unique trailer made for variable long loads. Features voer 150 pieces, woodgrained trailer bed which extends from 19 3/16" to 31 3/16", adjustable rear suspension to suite the load, front landing gear snaps up or down and can be built with either wheels or sandshoes, removable front bulkhead with grab handles, detailed scuff rails have open pockets so you tie down the scale load, chrome spoked wheels, Goodyear tires and more. Molded in white and black and includes an extensive decal sheet.
Plastic Model Kit, Box Condition: Good
$42
From the 1970s and well detailed inside and out. Features an excellent cockpit and other interior, optional position landing gear, detailed wheel wells, complete bomb bay with optional position bomb bay doors, rotating turrets with elevating guns, rotating propellers & wheels, crew of three and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The decals are for the colorful box art aircraft.
Plastic Model Kit, Box Condition: Good+
$110
Large-scale model includes both the lowboy trailer and the Bulldozer. Just the bulldozer alone is a highly detailed kit with over 350 pieces features 6 cylinder turbocharged diesel engine, optional center tooth ripper attachment with vinyl hydraulic line tubing, adjustable blade and ripper, detailed track roller frames with working idler wheels, track rollers, track carrier rollers and drive sprockets, snap-together individual track sections and more. Molded in 'Cat Yellow', chrome plate, dull silver (treads), metal axles and with rubber tires. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc+
$69
Rare factory sealed original issue from the 1970s. This super detailed model features hundreds of parts, full rolling chassis build up like the real truck, detailed Cummins NTD-35 6 Cylinder Turbocharged Diesel Engine, Spicer 16 speed transmission, Holland sliding fifth wheel, Mercury sleeper, Hendrickson tandem rear suspension, full interior, optional Frigiking Air conditioner, tilting hood and much, much more.