Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airmodel Junkers JU-188 A and E Conversion - Bagged, 1/72, 113

Vacuform Model Kit

$8   

Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit to complete. Parts included are for the conversion only. Basic conversion only - some scratchbuilding is required.

Maintrack Saunders-Roe SR.177 - (SR-177), 1/72, PX010

Vacuform Model Kit

$68   

Highly detailed vac kit with better mold quality than most injection molded kits. Includes cast metal details and decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The SR.177 was a further development of the SR.53. The SR177 combined rocket with turbine power. The 177 had a jet engine of significantly more power than the 53, so it could cruise without use of the rocket motor. The interceptor was to be armed with two Firestreak missiles. Although British air policy changed, the work continued due to German interest in the project. However, the program was dropped when Germany went with the Lockheed F-104 Starfighter.

VP Blohm & Voss BV-40 Armored Attack Glider - Bagged, 1/72

Vacuform Model Kit

$14   

Very high quality vac kit. Beautifully molded with all fine recessed panel lines. Includes white vac parts and clear window material. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

RCM U-9 German WWI Submarine, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$119   

The famous submarine of Kommandant Otto Weddigen who sank three British Armored Cruisers in just a few hours. SPECIAL ORDER vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic components, full size plans plus metal or resin parts such as guns, anchors, cleats, etc. Does not include decals. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Aeroclub Mig-17A Conversion Kit, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$16   

Conversion kit. Makes the Hasegawa Mig-17 into the early 'A' variant. Kit includes high quality vacuform fuselage and metal intake. Never started and complete.

Airmodel Heinkel He-115 - Bagged, 1/72, 133

Vacuform Model Kit,   Box Condition: Bagged

$9   

Basic vac kit with main airframe parts and clear canopy. Nicely done moldings with recessed panel lines. Complete and never started. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

RCM Sikorsky S-39B Amphibian, 1/48

Vacuform Model Kit,   Box Condition: Bagged

$62   

SPECIAL ORDER larger (1/48) vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, prop, struts, etc. Does not include decals. Advanced modeling skills are required to build vacuform kits. Not recommended for beginners.

RCM USS Ward DD139 - WWI / WWII, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$125   

Very large (1/72) partial) kit of this historic destroyer. Includes information so you can build it as she was in World War I or World War II. This is a really basic kit consisting of a 2 piece hull, some small vac pieces and a lot of resin small items such as the screws, bitts, cleats, guns, etc. It includes full size plans and 15 pages of detailed instructions that include photographs. The instructions list the fittings required (Bluejacket and Model Shipways). SPECIAL ORDER only; not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. This model is not recommended for builders lacking experience with vacuform kits. Scratch building skills will be essential. The USS Ward is said to have fired the first shots of World War II. Before the main strike on Pearl Harbor, the Ward was on patrol. She located and sank one of five Japanese Midget Submarines.

Airframe Arado Ar-231 - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$9   

Still factory sealed. The Arado 231 was designed as a small submarine borne spotter aircraft and was first flown in 1941. It could be dismantled in six minutes and stored in a tube with a diameter of 6.56 feet. The aircraft was not considered successful and only six machines were completed. Basic vacuform kit; not recommended for modelers who have not built vac kits. Scratch building experience and a large spares box is necessary.

Airmodel Curtiss XF-15 C-1 - Bagged, 1/72, 174

Vacuform Model Kit,   Box Condition: Bagged

$18   

Still factory sealed. One of Airmodel's better jobs with nice recessed panel detail, clean canopy and instructions with assembly diagrams. The Curtiss XF-15 C-1 was a mixed powerplant (piston and jet engine) long-range aircraft carrier based interceptor. Basic vacuform kit. Vaccuform kits are only recommended for modelers who are experienced with this type of kit.

Contrail Westland Welkin - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$12   

Still factory sealed. Features white vac main parts and a clear canopy; however, the canopy has become brittle and split as shown.

Fowler Boeing 727-200 Conversion Kit - Two Conversions Bagged, 1/144, CF-1

Vacuform Model Kit,   Box Condition: Bagged

$5   

Possibly from ex-Griffon molds. Includes enough conversion parts for two models. Includes full instructions and side and cockpit window and door decal sheet. Never started. Complete with all parts and instructions.

Aeroclub Mig-17PF Conversion Kit, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$16   

Still factory sealed. Kit contains full instructions, cast metal nose and tail cone and high quality vacuform fuselage. Requires a base kit, and the Hasegawa 1/72 Mig-17 is recommended.

Airmodel McDonnell F3H-2 Demon - (F3H2), 1/72, 202

Vacuform Model Kit,   Box Condition: Sealed

$10   

Basic vac kit with main airframe parts and clear canopy. Well detailed moldings with recessed panel lines. Complete and never started. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Maintrack De Havilland DH-108 - VW120 or TG/283 - Bagged, 1/72, PX-026

Vacuform Model Kit,   Box Condition: Sealed

$42   

From 1993. Very high quality vac kit with moldings of higher quality than many injection molded kits. Features two complete fuselages so you can build one of two versions, main vac parts, detailed cockpit, cast metal details and full decals for two aircraft. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Maintrack Supermarine 508 - Bagged, 1/72, PX-015

Vacuform Model Kit,   Box Condition: Sealed

$44   

Sale Pending
Email for availability.

Kit is still factory sealed. Bag has a tear at right, but all small metal parts are in an internally sealed bag and all other parts are present. Very high quality vac kit. Features excellent moldings, full decals for both airplanes and many metal details. Kit is of Type 529 VX136 or VX133. Initially designed as an undercarriage-less aircraft for use from the 'flexible deck' aircraft carrier being though of at the time. Interest was quickly lost in the flexible deck and the Admiralty ask for real landing gear. This was easily incorporated into the design, and the 508 was born. The aircraft has folding wings, an offset nosewheel, two very early 'Avon' engines and a unique variable incidence tail. Performance was good, and the 3rd prototype was given swept wings...which gave birth to the Scimitar fighter.

Sierra AEG G-IV Night Bomber - Bagged, 1/72, 72-14

Vacuform Model Kit,   Box Condition: Sealed

$29   

Still factory sealed. Kit features superbly molded main vacuform parts of better quality than many injection molded kits, injection molded details and plans/instructions.

Esoteric Hawker Nimrod I or II, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$24   

Esoteric was known for making perhaps the finest vacuform kits. Very well molded and highly detailed with metal parts - shaped struts and full instructions. Molds are equal to or of higher quality than most injection molded kits. The kit is still factory sealed.

Rareplane Douglas F3D-1 Skyknight - (F3D1), 1/72

Vacuform Model Kit,   Box Condition: Sealed

$18   

Very high quality vacuform kit with moldings equal to or better than many injection molded models. Features very fine detail, complete cockpit, clear canopies and instructions/plans. Never started. Factory bag is still sealed. Note: significant modeling skill is needed to assembly vacuform kits. They are not recommended for beginners.

Contrail Zeppelin Staaken R.VI - Land Bomber or German Navy 'L' Floatplane, 1/72

Vacuform Model Kit,   Box Condition: Exc

$56   

Features very nice vac moldings, all optional parts for land or seaplane, injection molded undercarriage, propellers, struts, etc and decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.