Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Convair B-58 Hustler - 'S' Issue, 1/94, H252-98

Plastic Model Kit,   Box Condition: VG+

Sold   

First issue dated 1957 with the wonderful box art that has made these models so desirable today. Very nicely detailed and features very fine recessed and raised panel lines, full crew, three opening cockpit hatches, rotating wheels, 'The Pod' for weapons and fuel and highly detailed gear struts and braces. The kit has never been started. It has been inventoried and NOTE: missing the two tiny hatch windows. Easily made (or reproduced with clear glue) if you wish to build it. Otherwise complete with all other parts and includes decals and instructions.

Cox Thimble-Drone L-4 Grasshopper Control Line Gas Aircraft, 7200-898

Plastic Model Kit,   Box Condition: Good-

Sold   

Rare in this condition. Never flown, still in the original box. This is a one-owner gas model purchased new by a discriminating collector. The box is complete but has a closed tear and tape on it as shown, only at the lower left. Beyond that it is good and the original clear cello is intact. Inside, it is factory new. The airplane has never been flown or even displayed; it is mint. it is still held in the original factory cardboard retainers which are in very good condition. The control line handle is present, mounted to the side as the factory did. The instructions are present and not even yellowed; but they do have minor bug damage.

Glencoe Curtiss Condor - Argentine Navy / Byrd / American Airways, 1/82, 06101

Plastic Model Kit,   Box Condition: Good-

Sold   

Ex ITC molds. Contains decals for all three versions. The Condor was perhaps the first 'Modern Airliner' featuring electric retractable landing gear and a comfortable sound-proofed cabin. Large colorful decal sheet. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Encore Naval 24 Pounder Cannon - (ex-Palmer / Life-Like), 1/24, EC9690

Plastic Model Kit,   Box Condition: VG

Sold   

Encore did an excellent job of cleaning up the molds for this kit, as this issue looks much better than the original Palmer or Life-Like ones ever did. Measures approximately 6 inches long assembled and is molded in gray plastic and includes scale rope and metal chain. The kit has never been started. Internal factory sealed bag including instructions.

Italaerei Dornier Do-24T Seaplane, 1/72, 122

Plastic Model Kit,   Box Condition: Good-

Sold   

Very nicely molded and detailed kit with 116 parts. Features all fine recessed panel lines, detailed cockpit, rotating turrets, separately molded elevators and markings for two aircraft. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The Do-24 was being built in Holland under license. When the Germans invaded, they found 3 done and 25 in various states of completion. The Air Ministry was looking for aircraft suitable to salvage sunk aircraft, and the Do-24 fit the bill. The American Wright engines were removed and BMWs installed. The Do-24 went on to see successful service in WWII as recon, supply and ambulance aircraft. A squadron was supplied to Spain, and one Do-24 remained operational until 1970.

Italeri Road Commander US Wrecking Truck - Western Star Heavy DutyTow Truck, 1/24, 794

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Very high quality and detailed model.

A-Model Saab J-21A Fighter - Bagged, 1/48

Vaccuform Model Kit,   Box Condition: Sealed NM

Sold   

Still the only 1/48 scale model ever made of this unique and successful Saab fighter. From 1977 and includes all major airframe parts vacuformed in white plastic and a clear canopy sheet that is in fine condition (still clear and not yellowed). Never started. It has been inventoried complete with all parts and includes plans. Please note that vacuform modelers are not for beginners. Certain skills, including scratch building, are required to build this type of kit.

Supermodel Blohm und Voss BV-138 B-1 / C-1 /MS Minesweeper / B-1, 1/72, 10-017

Plastic Model Kit,   Box Condition: Good

Sold   

Long range diesel powered WWII flying boat known as 'The Flying Clog'. Bv-138s supported many operations in WWII, but may be best known for its ability to support U-Boats for days a time by being towed and refueled by the U-Boats themselves. Nicely detailed kit can build one of three version including the unique minesweeper with the flying ring. Color painting guide included. Never started. The parts are still in the internal factory sealed bags along with all paperwork. Literally everything is still in the sealed bag.

Monogram Rambo Attack Set UH-1 and Vietnam River Boat, 1/48, 6039

Plastic Model Kit,   Box Condition: Good

Sold   

1985 kit issued with the hit movie. Contains both 'Copter and Vietnam River Boats in 1/48 scale. The models have not been started. The Huey and the River Boat are both still in the factory sealed bags. With decals and instructions.

Revell Custom Harley Chopper - Harley Davidson Motorcycle, 1/8, 7911

Plastic Model Kit,   Box Condition: Sealed Good

Sold   

Rare. Still factory sealed. 1984 issue of this large scale model is very highly detailed.

Kyosho Douglas DC-6 (C-118 Liftmaster) - 71 Inch Wingspan Flying Aircraft Model - (ex Eureka And KYO, 1/20

Multimedia Model Kit,   Box Condition: VG

Sold   

Very rare. Giant 71 inch wingspan scale DC-6 designed for four .19 engines and control line flight. Can be converted to RC or also built as a C-118 if you have the extra resources and conversion skills. Extensively pre-fabricated, high quality kit of very sturdy design is intended to be complete sheeted with balsa - no tissue. The model features completely die cut ribs, plywood bulkheads and main spar, keel, nacelle bulkheads & inner structures and more, factory assembled metal sprung landing gear struts with balloon wheels, four aluminum cowls, clear vacuform cockpit windshield (clear and not yellow, but has a crack/split to a small but visible section), metal push rods and a great deal of other factory-cut wood parts and metal parts as needed. Includes two huge sheets of full size plans. The kit has not been started. The parts that were factory bag sealed are still sealed. Almost all of the parts that were factory taped are still in tape. The parts that were no longer taped have been inventoried complete and includes plans in 'excellent' condition. Recommended only for highly experienced modelers. This box is labeled both Kyosho and 'KYO.' 'KYO' was often used on early Kyosho kits. Please note this kit must be shipped insured.

Pyro 1931 Alfa Romeo Gran Turismo 6C-1750cc, 1/32, C320-50

Plastic Model Kit,   Box Condition: Poor

Sold   

1966 Pyro issue from original molds. Ideal builder- the box is rough but the kit and instructions inside are mint. In the early to mid 1960s the Pyro company chose many kit subjects based on historical significance instead of popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to, such as this Alfa, which was in the collection of John C. Silva Jr of the Silva Auto Engineering Shop in Massachusetts. Features detailed chassis, complete motor and interior and a removable hood. Molded in red and clear. The kit has never been started. Inventoried 100% complete including instructions.

Revell Boeing B-52 Stratofortress - From Pre S Molds, 1/175, H150

Plastic Model Kit,   Box Condition: Good++

Sold   

1976 issue and very likely the last release from the original Pre-S molds; makes an ideal 'Classic Builder.' Molded in black and clear and includes long range fuel tanks, clear cockpit and tail gunner canopies & display stand. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Roco Bell AH-1G Huey Cobra Gunship HO Scale, 1/87, Z247

Plastic Model Kit,   Box Condition: VG++

Sold   

Hard to find. Older but very well detailed HO scale kit. Includes cockpit detail, crew of two, rotating main and tail rotors, rotating turrets, external stores and full color decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram OS2U-3 Kingfisher - RAF Or US Navy - Blue Box Issue - (OS2U3), 1/48, PA135-150

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

Still factory sealed but the seal has many splits as shown and also along the left and right lower sides. First issue dated 1966. This kit is part of the very famous line of 1/48 scale World War II action kits. Finely molded and detailed for that time with traditional Monogram quality. Features optional parts so you can built a the ship-based (float) or wheeled land version, good cockpit detail, underwing bombs, elevating and rotating gun, pilot and gunner figures, five piece canopy that can be positioned closed or in several open configurations and choice of US Navy or Royal Navy decals. The Royal Navy aircraft were called Kingfisher I and 100 of them were delivered with both wheel and float gear. The US Navy aircraft is that of Lieutenant William F. Eadie from a Kingfisher squadron based in the Ellice Islands. He spotted and rescued Capt. Eddie Rickenbacker and his companions after they had been on a raft in the Pacific for 21 days and virtually given up for lost. Lt. Eadie moved the most injured into the radio compartment while Rickenbacker and the other crew member were lashed to the wings. Eadie figured that the aircraft could not fly, and luckily he met a PT boat and transfered the uninjured men to it.

AMT New Ford Pinto Runabout - Stock hatchback or Blown Boss 429 Drag Gasser, 1/25, T422-225

Plastic Model Kit,   Box Condition: VG

Sold   

Unusual and hard to find original issue. Nicely detailed and includes parts to build the stock Pinto or 429 Boss street racer. Features stock 4 cylinder overhead cam engine, opening hood, detailed engine compartment, full interior, separately molded suspension and exhaust, optional 429 V-8, Hi-Rise hood, side pipes, American mags, gauges, tach, custom shifter, custom decal treatments and more. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Aurora The Man From UNCLE Illya Kuryakia, 1/8, 412--98

Plastic Model Kit,   Box Condition: Sealed Good+

Sold   

Still factory sealed and very rare in this condition. 1966 hardbox issue from the famous TV show. When built, this model can be a single display or it is designed to interlock with the Napoleon Solo model to form a larger action scene. The box appears slightly better than the listed condition but is only given the 'sealed good+' grade because there is are two heavy creases at the top as shown, some light wear and the box is very slightly concave on the top & very slightly convex on the two long sides. The seal has an 8" split along the bottom but all of the seal is present. Please note this kit must be shipped insured.

Tamiya British Centurion MkIII Motorized Remote Control, 1/35, MT230

Plastic Model Kit,   Box Condition: Exc+

Sold   

Rare. 1/35 scale tank kit with dual motor drive, metal gearbox and Tamiya wired Remote Control system. Even includes both RE140 electric motors. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Tamiya US Army M60A1 Medium Tank Motorized Remote Control, 1/35, 4028

Plastic Model Kit,   Box Condition: Exc

Sold   

Very rare early version with dual motor drive and hand-held remote control. Features all metal gear box, two RE-140E electric motors, factory wired switches, all hardware and remote box. Realistic drive is through the sprockets like on the actual tank. Flexible tracks are in excellent condition. Includes decals for 3 tanks from the US 3rd Cavalry Division 'Spearhead', 194th Independent Calvary Brigade and the 5th Mechanized Infantry Division. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Contrail Saunders-Roe S.36 Lerwick - (S-36), 1/72

Vacuform Model Kit,   Box Condition: Exc+

Sold   

The Lerwick was an all metal flying boat powered by two Hercules engines. Initial versions had twin stabilizers and rudders. Designed for long patrols, she was armed with three powered turrets and a variety of weapons. The Lerwick was found to be aerodynamically unstable, even with the addition of a single large vertical fin. Because of this, it was not used much and only 21 were built. The PBY was found to be a much easier platform to fly, and the last Lerwick patrol was in 1943. This model features vac main parts, decals and injection molded and cast white metal details. Never started. The small parts are still in the factory sealed bags; the parts that were never factory sealed have been inventoried complete. Includes decals and plans/instructions. Significant modeling skill is required to build vacuform kit. Not recommended for beginners.