Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Revell Lockheed P-38J Lightning, 1/32, 4749

Plastic Model Kit,   Box Condition: Good

Sold   

From 1992. Features full underwing stores, detailed Allison engines with removable cowls, fully detailed cockpit, four 50 cal. Machine guns and one 20mm cannon and movable wheels and props. Has decals for 'Pudgy IV'. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

KVZ Mig-21F, 1/100, 15100

Plastic Model Kit,   Box Condition: Sealed Exc+

Sold   

Still factory sealed. One of the later KVZ issues. Made in Communist East Germany. KVZ was East Germany's primary model manufacturer (if not the only one) and made a wide range of injection molded civil and military kits. Often these are the only models ever made of some subjects.

Pyro USS Essex Aircraft Carrier - Table Top Navy, 1/1200, C388-50

Plastic Model Kit,   Box Condition: NM

Sold   

Small scale ship kit from the Table Top Navy series. Very nicely done kits for their time. Can be built full hull or waterline. Features propeller and shaft detail, separately molded island and other deck details and more. The kit has never been started. It has been inventoried complete with all parts and instructions. Many of the Pyro kits came from Eagle (then Eaglewall) molds in England. Eaglewall went out of business around 1962 and Pyro acquired at least some of the molds. Pyro reissued some of these kits in the mid 1960s with AJ Rudisill artwork. Evidently the line was successful, as Pyro then cut some of their own molds and expanded the series significantly. The earlier issues have the full color artwork and a three digit part number. Later issues have a 'B' or 'C' in front of the three digit kit number; some have simplified box art that is a modification of the original Rudisill paintings by painting out most of the background. Pyro issued these kits into the late 1960 when Life-Like took over the molds. Some were reissued by Life-Like.

Lindberg Chesapeake Bay Skipjack Oyster Boat (ex-Pyro 'Carrie Price'), 1/60, 850

Plastic Model Kit,   Box Condition: Good

Sold   

From 1989. Beautiful sloop model from ex-Pyro molds originally cut in the early 1960s. Measures 12 inches long when assembled and an excellent kit for that time. Features full hull, optional position keel, optional position cabin and deck hatch if you wish to super-detail the insides, full deck fittings, two detailed small boats, railings and life rings, furled sails (as shown on box art)and rigging material with a rigging diagram. Never started. Factory sealed parts bag with instructions. The skipjack 'Carrie Price' is an exact replica of a typical small sailing vessel used along the Chesapeake Bay area to dredge for oysters. The center keel stabilizer could be pulled up for working in very shallow water. Until 1942 sail was the only power permitted for oyster dredging; after 1942 the state passed a law allowing power boats to be used. This lead to almost all the skipjacks being converted to power and having the main mast cut down. Although its days are past, many yachtsmen restore and sail this beautiful small craft today.

MPC Battle of Britain Diorama Spitfire / Bedford QL / AEC Tanker and Crew, 1/72, 2-1206-200

Plastic Model Kit,   Box Condition: Good

Sold   

1970s kit is a complete diorama of a Battle of Britain scene. Features airfield display base, Spitfire model, AEC Tanker and Bedford QL kits and 11 crew. The model has not been started. The Spitfire is still sealed in the factory bag. The other parts are not bagged but are inventoried 100% complete with all parts, decals and instructions.

MPC Prinz Eugen - WWII Heavy Cruiser, 1/600, 1-5251

Plastic Model Kit,   Box Condition: VG++

Sold   

From Airfix molds in the 1960s. For that time this was a very highly detailed full-hull kit. This kit has not been started. The parts are still in the factory sealed bag with the instructions.

Hobby Boss Mig-17 Fresco C + Eduard PE + Pavla Seat - Soviet Air Force / East German / North Vietnam, 1/48, 80334

Plastic Model Kit,   Box Condition: NM

Sold   

Includes Eduard #48455 Color PE interior details and Pavla #S48003 KK-1 Ejection seat in resin. Both are still factory sealed. The kit itself is very nicely molded with all recessed panel lines, excellent cockpit tub, highly detailed engine with removable back fuselage section, 'good' gear well detail, separately molded wing flaps and ailerons, optional position canopy and speed brakes (with detailed wells), a nice variety of weapons and decals for the air forces listed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Pontiac Grand Am Revelleader Funny Car, 1/16, 7444

Plastic Model Kit,   Box Condition: VG++

Sold   

Mickey Thompson designed Pontiac Grand Am racer driven by Butch Maas. 2000+ HP funny car was the hottest thing on the NHRA circuit in the early 1970s. Very highly detailed large scale (1/16) funny car kit. Body tilts up to reveal detailed tubular chassis, full cockpit, completely wired motor and more. Front wheels are steerable. Includes full colorful decals. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (the chrome tree) has been inventoried complete including decals and instructions.

Hobby Craft Vought F7U-3/3M Cutlass - US Navy - (F7U3/3M), 1/48, HC1600

Plastic Model Kit,   Box Condition: Sealed VG

Sold   

Still factory sealed, but the seal has drawn the box top concave as shown. Large scale kit with all fine recessed panel lines. Features four separately molded leading edge wing slats, separately molded ailerons, two piece canopy, drop tanks and four Sparrow I Missiles.

Fujimi Mitsubishi F-1 Support Fighter, 1/48, 5A30-1200

Plastic Model Kit,   Box Condition: VG+

Sold   

Very rare 1/48 scale F-1 kit. Beautifully molded with all fine recessed panel lines, detailed cockpit and gear wells, optional position speed brakes, two piece canopy, drop tanks, air-to-surface missiles, rocket pods, AIM-9 Sidewinders, 500 and 750lb iron bombs, loading chart with different loadouts and decals for several aircraft. The kit has never been started. Internal factory sealed bags including decals and instructions.

Revell P2V-7 Neptune 'S' Issue - (P2V7), 1/104, H239-98

Plastic Model Kit,   Box Condition: VG

Sold   

1955 first issue hardbox with timeless 'S' box art. Very nicely molded and detailed kit for that time. Plastic is gloss silver and clear and includes the famous Swivel Base Display Stand. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: box displays 'excellent' but is graded 'very good' because there is a 1" by 1/2" tape tear on the right short side.

AMT Intrepid - Civil War Balloon with Aeronaut Thaddeus Lowe, 1/57, T571

Plastic Model Kit,   Box Condition: Sealed NM

Sold   

Still factory sealed. Early issue from about 1975. Large 1/57 scale kit. Features thread for a realistic simulation of netting, figure of Balloon Corps founder Thaddeus Lowe, color 'Intrepid' decals for each side and eyelet for mounting from the ceiling or other.

Revell Sikorsky CH-53G - US Marines or Luftwaffe, 1/48, 4511

Plastic Model Kit,   Box Condition: Good

Sold   

1981 issue. Large and highly detailed kit. Features full cockpit and cargo bay, optional position cargo doors, rotating main and tail rotors, decals for two versions and a payload of one scale Army Jeep and 105mm Howitzer. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram 1957 Chevrolet Bel Air (Belair) Sport Coupe - Stock / Street Custom / Drag Strip, 1/12, 2800

Plastic Model Kit,   Box Condition: Good

Sold   

1986 issue of this classic highly detailed kit. Molded in black, chrome, clear, red, white and with rubber tires. Features stock 282 Fuel Injection motor, street 2X4 carbs and strip blower engines, ignition wiring, stock three speed or custom Borg Warner 4 speed transmission, complete exhaust, suspension and underside drive train details, detailed complete interior (custom interior includes roll cage), optional fender skirts, detailed engine compartment down to flexible heater hoses, fuzzy dice, opening hood and more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (chrome parts) have been inventoried and are missing the (4) custom rims. The stock rims are present. There are no other missing parts. Includes decals and instructions but NOTE that the decals are missing 1/3 of them. Also, NOTE: the rear clear window has a crack in it.

Revell BO-105 Helitow - Sweden, 1/32, 4416

Plastic Model Kit,   Box Condition: Sealed Exc++

Sold   

Still factory sealed. Dated 1990.

RCM Douglas C-74 Globemaster, 1/72

Vacuform Model Kit,   Box Condition: Bagged

Sold   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

ITC Stinson Model T Tri-Motor - Eastern Air Service, 1/61, 3722

Plastic Model Kit,   Box Condition: VG

Sold   

Rare. This famous early 1930s transport was the primary competition of the Ford Tri-Motor and saw widespread use. It was the idea of E.L. Cord, the money behind the aircraft and the owner of the Auburn-Cord-Duesenberg automobile company. Cord also owned Lycoming, the engines that ended up on the final product. Another of Cord's companies was Century Airlines, which naturally used the aircraft. Century later became part of American Airlines. The Model T was used by many other airlines including Eastern, Delta, Braniff, TWA, United and American when they rolled up Century. The Tri-Motor carried 10 passengers, baggage and of course the mail, which was critical to early airline revenue. The aircraft proved successful and economical to operate. Includes clear windows, interior with passengers and pilots, Eastern Air Service decals and clear blue-tinted display stand. Never started. Inventoried 100% complete with all parts, decals and instructions. The clear parts and decals are still in the factory sealed bag.

ITC Stinson Model T Tri-Motor - Eastern Air Service, 1/61, 3722

Plastic Model Kit,   Box Condition: VG++

Sold   

Rare. This famous early 1930s transport was the primary competition of the Ford Tri-Motor and saw widespread use. It was the idea of E.L. Cord, the money behind the aircraft and the owner of the Auburn-Cord-Duesenberg automobile company. Cord also owned Lycoming, the engines that ended up on the final product. Another of Cord's companies was Century Airlines, which naturally used the aircraft. Century later became part of American Airlines. The Model T was used by many other airlines including Eastern, Delta, Braniff, TWA, United and American when they rolled up Century. The Tri-Motor carried 10 passengers, baggage and of course the mail, which was critical to early airline revenue. The aircraft proved successful and economical to operate. Includes clear windows, interior with passengers and pilots, Eastern Air Service decals and clear blue-tinted display stand. Never started. Inventoried 100% complete with all parts, decals and instructions.

AMT Model T Ford - Two 3 in 1 Kits - Stock T Convertible or T Chopped Coupe, 1/25, 626

Plastic Model Kit,   Box Condition: Exc++

Sold   

2010 reissue of this classic kit. Contains both Model T kits. The 'Stock' T can be built as a Stock Roadster, Stock Pickup or Street Roadster and the Competition Coupe can be built one way. Features stock 'T' engine and a Lincoln engine in Street or Competition version. Each kit builds a rolling chassis just like the actual car with detailed suspension, driveline and other parts. Tailgate can be positioned opened or close. Both cars have full interiors and the coupe has optional up or down tops. Molded in white, chrome and clear and with rubber tires. The kit has never been started. Inventoried 100% complete including decals and instructions.

Gabriel Duesenberg Model SJ Dual Cowl Phaeton - (ex-Hubley), 1/18, 4864

Multimedia Model Kit,   Box Condition: Good

Sold   

NOTE: builder only, please read carefully. From quality Hubley molds. Large 1/18 scale, highly-detailed multi-media kit with over 140 parts. Features primarily metal parts with injection molded plastic, rubber and other materials for the details. Builds up a rolling chassis just like the real automobile. Chassis includes complete engine and transmission, exhaust system, drive shaft, axles, tie rod and metal worm gear working steering and more. The engine alone is 34 parts. The six piece hood can be opened and closed. Includes full interior detail, rubber tires, chrome wire wheels, clear windshields and large tree of chrome plated details. Very realistic kit since most items that were metal on the real car are metal on this kit. NOTE: this kit has minor and very neat assembly, all of which is 'professional' to 'excellent' quality. The flash has been cleaned from the parts. The body shell halves, engine halves, front and rear suspension and steering box are assembled. There is no other assembly and zero painting. NOTE: inventoried and missing two small screws (easily replaced) and both front suspension springs. All other parts, decals, instructions are present.