Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Vac Wings Illyushin Il-2 Sturmovik, 1/48, WV486

Vacuform Model Kit

$9   

High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

RCM Boeing 314 Pan Am Clipper, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$98   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. NOTE: vacuform kits are not recommended for modelers who are not highly experienced with this type of kit. Extensive fabrication and scratch building skills are required.

Airmodel McDonnell F2H-2/2P Banshee - Bagged - (F2H2), 1/72, 198

Vacuform Model Kit,   Box Condition: Bagged

$12   

This kit is often used just for the conversion parts to transform the Airfix / MPC Banshee to the recon-nose variant. Builds either version of the Banshee. Basic vac kit that is nicely molded with recessed panel lines. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners or builder without scratch building experience.

Vac Wings Kawasaki Ki-32 'Mary', 1/72

Vacuform Model Kit,   Box Condition: Bagged

$8   

High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Still factory sealed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Vac Wings Kawasaki Ki-10 Perry, 1/72, VW7220

Vacuform Model Kit,   Box Condition: Bagged

$9   

Still factory sealed. High quality vacuform kit with recessed panel lines, full plans/instructions and clear parts as needed. Certain modeling skills are required to build vacuform kits. Not recommended for beginners.

Execuform 29 Aircraft Engines from 1927-1948 - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$27   

Still factory sealed. Includes 29 different engines including a full chart. Engines are radial and in-line. Cavity molded for excellent detail.

Execuform Northrop XP-56, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$12   

Basic vacuform kit. Never started. Complete with vacuform main parts, plans, clear parts and instructions. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Roseplane Nieuport 12 French and RAF WWI Fighter, 1/72

Vacuform Model Kit,   Box Condition: Good

$28   

Very high quality vac parts with full interior and vac windscreen. Extruded rod is included for struts. Never started and complete with all parts and plans/instructions. Roseplane did not furnish decals with this kit. The Nieuport 12 was a larger and more powerful Nieuport 10. Several hundred were built and served with RFC and the RNAS as well as the French Air Force. The unique feature of the aircraft was a transparent 'skylight' in the center upper wing.

RCM Republic XF-12 Rainbow, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$99   

SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Airmodel Two seat FW190 A-8/U-1 with A and F Conversions - Bagged, 1/72, 135

Vacuform Model Kit,   Box Condition: Bagged

$6   

Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit to complete. Parts included are for the conversion only. Some scratchbuilding is required.

Airmodel Curtiss P-40 N / Goodyear FG-1A Corsair / P-51D Conversions - Bagged, 1/72, 107

Vacuform Model Kit,   Box Condition: Bagged

$9   

Contains all three ;short' conversions. Never started Complete with all parts and instructions. Conversion kits require a base injection molded kit (not included) to complete. This is a basic conversion only - some scratchbuilding is required.

Airmodel Vickers Wellington B.I / GR XIV Conversion - Bagged, 1/72, 116

Vacuform Model Kit,   Box Condition: Bagged

$12   

Vacuform conversion kit only - requires base kit to complete. Never started. Complete with all uncut parts and instructions. Basic conversion only - some scratchbuilding is required.

Airmodel Junkers JU-188 A and E Conversion - Bagged, 1/72, 113

Vacuform Model Kit,   Box Condition: Bagged

$8   

Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit to complete. Parts included are for the conversion only. Basic conversion only - some scratchbuilding is required.

Maintrack Saunders-Roe SR.177 - (SR-177), 1/72, PX010

Vacuform Model Kit,   Box Condition: Bagged

$68   

Highly detailed vac kit with better mold quality than most injection molded kits. Includes cast metal details and decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. The SR.177 was a further development of the SR.53. The SR177 combined rocket with turbine power. The 177 had a jet engine of significantly more power than the 53, so it could cruise without use of the rocket motor. The interceptor was to be armed with two Firestreak missiles. Although British air policy changed, the work continued due to German interest in the project. However, the program was dropped when Germany went with the Lockheed F-104 Starfighter.

VP Blohm & Voss BV-40 Armored Attack Glider - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$14   

Very high quality vac kit. Beautifully molded with all fine recessed panel lines. Includes white vac parts and clear window material. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

RCM U-9 German WWI Submarine, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$119   

The famous submarine of Kommandant Otto Weddigen who sank three British Armored Cruisers in just a few hours. SPECIAL ORDER vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic components, full size plans plus metal or resin parts such as guns, anchors, cleats, etc. Does not include decals. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.

Aeroclub Mig-17A Conversion Kit, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$16   

Conversion kit. Makes the Hasegawa Mig-17 into the early 'A' variant. Kit includes high quality vacuform fuselage and metal intake. Never started and complete.

Airmodel Heinkel He-115 - Bagged, 1/72, 133

Vacuform Model Kit,   Box Condition: Bagged

$9   

Basic vac kit with main airframe parts and clear canopy. Nicely done moldings with recessed panel lines. Complete and never started. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

RCM Sikorsky S-39B Amphibian, 1/48

Vacuform Model Kit,   Box Condition: Bagged

$62   

SPECIAL ORDER larger (1/48) vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, prop, struts, etc. Does not include decals. Advanced modeling skills are required to build vacuform kits. Not recommended for beginners.

RCM USS Ward DD139 - WWI / WWII, 1/72

Vacuform Model Kit,   Box Condition: Bagged

$125   

Very large (1/72) partial) kit of this historic destroyer. Includes information so you can build it as she was in World War I or World War II. This is a really basic kit consisting of a 2 piece hull, some small vac pieces and a lot of resin small items such as the screws, bitts, cleats, guns, etc. It includes full size plans and 15 pages of detailed instructions that include photographs. The instructions list the fittings required (Bluejacket and Model Shipways). SPECIAL ORDER only; not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. This model is not recommended for builders lacking experience with vacuform kits. Scratch building skills will be essential. The USS Ward is said to have fired the first shots of World War II. Before the main strike on Pearl Harbor, the Ward was on patrol. She located and sank one of five Japanese Midget Submarines.