Plastic Model Kit, Box Condition: Sealed NM
$79
Still factory sealed and from 1994. this is a popular and very accurate, detailed model of the legendary space vehicle that took man to the moon. Features individual stages can be taken apart and reassembled to demonstrate all phases of a moon flight, individual LEM, CM & SM and more. With display base and full decals.
Plastic Model Kit, Box Condition: Good+
$20
Features fine raised panel lines and recessed control surface outlines, pilot figure, wing-mounted drop tanks, full landing gear and more. Includes a large and extensive decal sheet for both colorful aircraft. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: NM
$28
Long out of production and still considered one of the finest 1/72 scale U-2 models. It features optional optional parts to make either the single or double cockpit versions. NOTE: this kit has minor, 'professional' quality subassembly as follows: stick and seat to the floor; instrument panel to one fuselage half; wing halves. There is no other assembly. The aircraft has been inventoried with all parts present and includes decals and instructions. the decals are 100% intact but NOTE: there is some darker age foxing on the upper and right portions of the sheet. You may need to provide your own decals.
Plastic Model Kit, Box Condition: Exc
$26
Type 3 logo issue from the 1960s that is well molded and features cockpit and pilot, intake & exhaust detail, optional position speed brakes & landing gear and more. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Good
$18
1970s Type 4 logo issue. Very detailed, finely molded and includes the 88mm gun, tow dolly and the half track. Never started and inventoried complete with all parts and includes instructions. Please note that Airfix did not supply decals with this kit.
Plastic Model Kit, Box Condition: Good
$32
From new molds and a fine model that features 119 pieces, very fine recessed surface detail, very good cockpit, optional position canopy, pilot figure, enclosed and detailed gear wells, nonfolding wing set for the FR46, optional folded or extended wings on the FR47, separately molded rudder and split trailing edge wing flaps, drop tank, rockets and more. Includes decals for all three aircraft listed. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. Please NOTE that the decals have age spotting; 95+% of it is on the backing paper only.
Plastic Model Kit, Box Condition: Sealed Exc
$24
Still factory sealed. Very well molded with fine panel line detail and features 86 pieces, very nice cockpit, pilots, parts for both tropical and standard variants and a large weapons load of bombs (centerline and wing) and drop tanks. Includes decals for both aircraft.
Plastic Model Kit, Box Condition: Exc
$29
A more recent issue from the original 1960 molds. This contains both kits - a very nicely detailed LCM and M4. Sherman features flexible treads, detailed bogies and rotating turret. LCM includes full interior, pilot house and figure, opening front gate, prop and rudder detail and two additional crewmen. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Both decals and instructions are in 'excellent++' condition.
Plastic Model Kit, Box Condition: VG
$20
Detailed model from all new molds that features 157 pieces, all fine recessed panel lines, detailed cockpit, excellent engines, ventral gun tray, separately molded ailerons, trailing edge split flaps, rudder & elevators, rotating turrets and much more. Includes a full color paint guide and decals for the two aircraft listed. NOTE: this kit has minor, 'professional' quality subassembly as follows: seats, control stick & bulkhead assembly; engines (4 pieces each. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$22
SALE!! Includes two models in one box. Ideal builder kits, please read carefully for the condition. NOTE: these models have 'professional' quality subassembly as follows: Kit #1: clear light lens to lower wing 1/2; instrument panel to right fuselage 1/2; cockpit tub. There is no other assembly. Inventoried complete with all parts, decals and instructions present. Kit #2: same as #1 plus one bomb 1/2 and spinner to propeller. There is no other assembly. Inventoried complete and includes decals and instructions. Features parts and decals to build either A-1 or B-1 variants. Very well molded with very fine raised panel lines, detailed cockpit, optional position canopy molded in 4 parts, rotating wheels and prop and optional bomb load.
Plastic Model Kit, Box Condition: Good++
$22
SALE!! Includes two kits in the one box shown. Kit #1 is never started and inventoried complete with all parts, including decals and instructions. NOTE: Kit #2 has minor and 'professional' quality subassembly as follows: propeller built; gear doors in the lower wing in 'up' position. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.
Plastic Model Kit, Box Condition: Good
$44
Large, quality model from 1988 featuring very good cockpit and gear well detail, optional position air-to-air refueling probe, optional position folding wing tips, optional position canopy and AIM-9 Sidewinder missiles. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc++
$39
Still factory sealed. Very highly detailed and widely considered the early best SBD in 1/48 scale. Features over 110 pieces, all fine recessed panel lines, full cockpit, optional position canopies, detailed R-1820 engine, optional position perforated dive flaps and more.
Plastic Model Kit, Box Condition: Sealed Exc++
$32
Still factory sealed but the seal has split from age. Revell-Kikoler Brazil issue from the popular original 1958 'S' molds. Well detailed and features moving rudder, flaps and elevators, rotating wheels and props and optional position cabin door with boarding stairs. With colorful and complete KLM decals. Molded in white and clear plastic.
Plastic Model Kit, Box Condition: No box
$42
Bagged kit - there is no box. The box is shown for reference only. Features a very large and colorful decal sheet for either Eastern Airlines, Western or Pan Am, all recessed panel lines, full cockpit, pilots, internal bulkheads, cabin floor, detailed engines and more. Never started and still in the Testors factory sealed bag. Includes instructions and decals. The DC-3 is directly responsible for bringing the US airlines into the modern transportation age. She pioneered regular cross-country travel and flew over 90% of the passenger miles in 1939, virtually taking over the airline business. The speed, comfort and economy of the DC-3 was responsible for doubling air traffic only two years after it went into service.
Plastic Model Kit, Box Condition: Exc-
$25
Molded in light gray-blue. Very nicely molded model. Includes decals for both versions. This kit has never been started. Inventoried complete with all parts, decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.
Plastic Model Kit, Box Condition: Good
$74
1961 issue. Done in a big 1/16 scale, this kit and the other 'Old Timers' in the series represented a significant leap forward in quality for Aurora. The kit features full suspension, transaxle and driveline detail. It builds up a rolling chassis like the real car, and includes full exhaust and a detailed interior. Molded in gloss ivory, gloss black and with chrome plated parts and real rubber tires. The kit has never been started. Inside, it is exactly as it left the factory. The black parts are still in the factory sealed bags. The ivory, chrome and clear were never factory sealed and have been inventoried complete including the instructions. Please note that the radiator emblem is neatly broken off but present for a simple repair. Aurora was renowned for turning a profit and for keeping expenses down. In researching new kit subjects, they came upon a forgotten jewel - the Hudson Miniatures line of 1/16 scale wooden kits. Hudson had discontinued this line due to lack of sales of wooden kits. But the Hudson models were second to none in quality, research and documentation. Aurora was quick to realize this and used the research and layout from these kits to create the subjects for this 'Old Timers' series. It is fortunate for us that they did, because in most cases this is the only injection molded kit of these rare and classic early automobiles.
Plastic Model Kit, Box Condition: VG+
$125
Rare issue with 'Famous Fighters' in the oval sunburst logo; this release only lasted only one year and is the true 1961 issue. (in 1962 the 'Famous Fighters' was dropped from the logo). The kit is molded in the correct gloss olive drab and clear plastic and contains the correct clear Aurora 'world' triangle stand. The kit has never been started. Inventoried 100% complete with all parts, decals and instructions.
Plastic Model Kit, Box Condition: Good+
$62
The Daimler company created the first practical gasoline powered automobile in 1886 when everyone else was still using steam power. The lightweight Benz gas engine was a breakthrough when married to the Daimler coach. This is a fine model from the original high-quality Bandai molds and features engine, driveline, front and rear suspension, steerable front wheels and more. Molded in green, black, dark brown, chrome plate and brass plate. Never started and the parts are still in the internal factory sealed bags and includes instructions. This is part of an incredible series of very large 1/16 scale automobile kits produced by Bandai which are very well detailed inside and out even by today's standards. Thankfully, Entex reissued them in the USA in the 1970s which has made them much more available. The Japan issues are rare and they were mainly available in that country, through certain west-coast mail order hobby shops and US Military PX stores.
Plastic Model Kit, Box Condition: Good
$110
From high quality Revell molds. This 1980s Entex issue of this large-scale, highly detailed, full-hull model kit measures over 19 inches long when assembled. Features movable elevating tower, bow monitor, hose outlets, fire hoses, rotating deck water guns, hose reels, radar, railings, crew, detailed wheel house, display stand, bollards, jackstaff, propellers and much more. Because of the large size of this model, many people have converted this kit to R/C operation but you need to furnish all parts for the power, hardware and radio gear (R/C equipment not included). Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219