Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale...

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Mitsubishi G4M2 Type 1 Betty Model 22 - Plus Ohka And Trolley - Yokosuka Naval Flying Group Fukuoka Tuiki Air Base Sept. 1944 / 701st Attack Sq 755th Naval Flying Group April 1944 / 762 NFG Ibaragi Kounoike Air Base April 1944, 1/72, CP7

Plastic Model Kit,   Box Condition: VG++

$54   

Rare and very highly detailed Betty from new molds; this is not the older Hasegawa Betty kit. Dated 1996 and features 160 pieces, all fine recessed panel lines, excellent interior and cockpit & crew station detail, optional position bomb bay doors, detailed bomb bay with either bomb or torpedo loads and more. Includes paint guide and decals for the three aircraft listed. Never started and inventoried complete with all parts and includes decals and instructions. This model also includes the Hasegawa 1/72 Ohka and ground trolley kit. It has never been started and is inventoried complete but NOTE: missing decals and instructions.

AFV Club M2A1 105mm Howitzer With Carriage M2A2 - Late WWII Version, 1/35, AF35182

Plastic Model Kit,   Box Condition: VG+

$28   

From new molds and highly detailed. Features new tooling for the carriage, flexible equilibrator springs that move with the barrel, working recoil mechanism, rubber wheel with correct period tread pattern, metal gun barrel with rifling, photoetched details, parts that can be stowed in 'towing' or 'firing' positions and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.

Adams Aerial Missile Transporter - Cessna YH-41 With Hawk Missiles, 1/40, K-158-98

Plastic Model Kit,   Box Condition: VG++

$145   

This was Cessna's only helicopter design and was considered as a transport to quickly resupply remote Hawk SAM launchers. Very nicely detailed model features full cockpit and interior, pilot and co-pilot figures, opening cabin doors, missile loader figure and Hawk Missiles with cradles. Never started. It has been inventoried complete with all parts and includes decals and instructions.

Ace Russian 3 Inch AA Gun - With PE Details, 1/72, 72265

Plastic Model Kit,   Box Condition: Exc

$18   

Highly detailed for this small scale and is perfect for a WWI aircraft ground diorama. Features 54 pieces and brass PE details. Never started and the parts are still in the internal factory sealed bags and includes instructions.

J Zinger Products TWO 13-6-10 Wood Propellers NOS - JZ - Bagged, 502

Plastic Model Kit,   Box Condition: Exc

$26   

NOS (new old stock) from the contents of a R/C-only hobby shop that closed in about 2003. Includes high quality, brand-new & never used wooden propellers of the size and quantity listed. Please note that the package you receive may or may not have the yellow header. I have duplicates of some props and some are missing the header.

J Zinger Products FIVE 15-10 Wood Propellers NOS - JZ - Bagged

Plastic Model Kit,   Box Condition: Exc

$34   

NOS (new old stock) from the contents of a R/C-only hobby shop that closed in about 2003. Includes high quality, brand-new & never used wooden propellers of the size and quantity listed. Please note that the package you receive may or may not have the yellow header. I have duplicates of some props and some are missing the header.

Italaerei TWO Panavia MRCA Tornado - RAF or Luftwaffe Prototypes, 1/72, 124

Plastic Model Kit,   Box Condition: Exc

$26   

SALE!! Includes two kits in the one box shown. Kit #1 is never started and inventoried complete with all parts, including decals and instructions. NOTE: Kit #2 has minor and 'professional' quality subassembly as follows: missiles build; bombs built; bulkhead, seat & side consoles to floor. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. Excellent kit with all fine recessed panel lines, working swing wings, moving horizontal tail planes, very good cockpits and more. Includes parts and decals for either aircraft - also includes weapons loadouts.

PST S-300 PMU SA-10 Grumble Air Defense Missile System And 5P85D Mobile Missle Lancher, 1/72, 72055

Plastic Model Kit,   Box Condition: VG

$20   

Very highly detailed. Includes missiles, launching/transporter tubes and mobile truck system. Never started. The parts are still in the factory sealed bags. With instructions.

Wingnut Wings Roland C-II - (C.II), 1/32, 32026

Plastic Model Kit,   Box Condition: Exc

$265   

Out of production. This is an amazingly well detailed injection molded model with a fret of PE details and a wide variety of decal choices. Never started. All parts are still in the internal factory sealed bags and includes decals and instructions.

UM Models TWO BA-9 Armored Vehicles / TWO 76mm Division Gun / TWO 57mm Anti-Tank Guns / TWO BA-6M Armored Vehicles, 1/72, 365

Plastic Model Kit,   Box Condition: Exc

$30   

SALE!! Includes all eight kits - there are two in each box. All have never been started. They are either still in the factory sealed internal bags or inventoried complete. Includes all paperwork.

Revell USS Oriskany Aircraft Carrier - Essex Class Angled Deck, 1/500, 85-0318

Plastic Model Kit,   Box Condition: Sealed Exc++

$145   

Still factory sealed. Hard-to-find 2017 reissue from the original 1967 molds of the Mighty 'O' of Korea and Vietnam. Aircraft from the Oriskany waged the Navy's first all-jet dogfight over Korea against eight Migs. Well detailed and features a full hull, complete propeller and rudder detail, movable elevators and cranes, separately molded AA armament & gun directors, detailed island structure with radar/sensor suite and much more. Includes an air wing with S-2 Trackers, F-8 Crusaders, A-4 Skyhawks and SH-3 Seakings. The decal sheet is large and extensive covering aircraft markings, elevator warning outlines, all flight deck markings and more.

Amodel Tu-128UT Pelican - (Fiddler Trainer), 1/72, 72115

Plastic Model Kit,   Box Condition: VG

$34   

At long last, an injection molded model of Fiddler's Three-Cockpit Trainer. Nicely detailed with over 100 pieces, all recessed surface detail, very good triple cockpits, optional position canopies, separately molded ailerons, trailing edge flaps, elevators & rudder, detailed landing gear, four K-80 missiles and more. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions. The giant Fiddler is still the world's largest fighter aircraft and was designed to range far and wide to hunt down B-52 bombers. The Soviet Union had such a large northern border that it could not be covered with the existing range surface-to-air missiles and the short-ranged fighters available. Instead of leaving large gaps unprotected, PVO opted for defending the entire front but loosely; the Fiddler was the result of this policy. The original design for this task was the La-250, which was unsuccessful and Lavochkin's last aircraft. The lessons learned helped develop the Tu-128. The large fuel load was carried internally while all the missiles were carried on wing pylons. The AA-5 "Ash" was one of the most powerful air-to-air missiles at that time. The aircraft was first shown publicly in 1961. 198 were built and production ended in 1970. Fiddler was not a dogfighter or highly sophisticated but was reliable. The only 'combat' experienced by this type was in shooting down NATO reconnaissance balloons. Fiddler had a very long service life, being replaced in 1990 by the much more capable Mig-31.

KP Yak-23 / Aero L-39 Albatross / Mig-15 UTI / Mig-21 MF, 1/72

Plastic Model Kit,   Box Condition: Good+ to VG

$22   

SALE!! Includes all 4 kits in the original boxes shown. All four are never started and the actual aircraft are inventoried complete with all parts and includes decals and instructions. NOTE: most if not all are missing the display stands.

Eidai German Missile V-2, 1/76, 712-600

Plastic Model Kit,   Box Condition: Good

$129   

Very rare model. Superbly detailed and includes V-2 missile, heavy tractor, Meiller Trailer, launching pad, 8Ton Half Track and Fire Guidance Center. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Aurora United States Sailor, 1/8, 410-98

Plastic Model Kit,   Box Condition: Good++

$125   

First issue dated 1957 and with artwork by Marinelli. This model is part of the famous early Aurora 'figure' kits, which were launched with the purchase of the Crown knight molds. Never started. It has been inventoried and the actual sailor is complete but NOTE: missing the ~1" disc for the display stand. Otherwise complete with all other parts and includes decals and instructions.

Frog Bristol Blenheim Mk 1 Bomber or Mk 1F Night Fighter Finnish - Romanian or RAF - Green Series, 1/72, F190

Plastic Model Kit,   Box Condition: Good-

$24   

This kit will build night fighter or bomber version and has decals for all three aircraft listed. It is a typical excellent Frog model with clean, quality moldings and no rivets, just fine panel lines. Never started and inventoried complete with all parts and includes decals and instructions. Frog is considered the father of injection molded model kits. The Lines Brothers opened Frog in 1932, capitalizing on the fever caused by Lindberg's solo transatlantic flight. Almost overnight the western populations became 'Air-Minded', and anything aviation was in high demand. Frog created a quality line of stick and tissue rubber powered aircraft and gliders as well as innovative ready-to-fly rubber powered aircraft that required no assembly. The box even contained a built-in rubber motor winder and fuselage holder. Model airplane flight competitions were popular in Great Britain, and one category was 'Rise Off the Ground', or ROG. By changing this to 'Flies Right Off the Ground', the FROG name was born. In 1936 Frog created a line of injection molded plastic models, the first such kit line in the world (Hawk sold a line of injection molded aircraft models in 1934 but they were factory assembled and painted). Named 'Penguin' after the bird that does not fly, the kits were innovative beyond the means of production. At a time when models were simply built by wingspan, the Penguin line was a constant 1/72 scale. Furthermore, a large 1/72 Short S.30 Empire class flying boat contained a full interior and lights! A line of accessories such as AA guns, tractors, hanger, ambulance, sound locator, searchlights and lighting kits were quickly added to the line. WWII caused a pause in production. After the war the box color changed from silver to green, and Penguin kits were also marketed in the USA. Production ended in 1950. Frog quickly expanded and released the Red, Orange, Black, Green, Gold Token, Spin and Comet series as well as Trail Blazers and several others. It is noteworthy that while most manufacturers in the 1940s/50 were making toy-like models, Frog attempted to make very realistic models. For example, 'detailing' kits with excessively large rivets was once very popular. Frog ignored this trend and continued to mold aircraft with fine panel lines and no rivets. As a result, Frog kits can be built into very realistic replicas. Production ended in the late 1970s, but Frog molds are still in use around the world.

OS Engines TWO Cover Plates For 40 and 46LA Engines, 24007110

Metal Model Kit,   Box Condition: Sealed

$20   

NOS - New Old Stock and still factory sealed. Contains two as shown.

Airfix 1911 Rolls Royce Silver Ghost, 1/32, 02444

Plastic Model Kit,   Box Condition: Good+

$32   

Nicely molded kit dated 1987 features front & rear suspension and axle detail, full interior, rear luggage rack, spare side-mount tires, rolling wheels, driver figure and more. There is a very extensive, illustrated painting guide. The kit has never been started. Inventoried 100% complete including instructions.

Comet Focke-Wulf Fw-190 Speed-O-Matic - 18 Inch Wingspan Flying Model, E7

Wood Model Kit,   Box Condition: VG

$44   

Rare kit from 1943. This '190 features printwood, factory-cut stringers and spars, fully formed nacelle and wheels, hardwood 3 blade propeller kit, balsa and hardwood stock as required, die-cut cardstock sheet, covering tissue and insignia sheet. With full size building plans. Never started and inventoried complete with all parts and includes all paperwork. Comet was a famous manufacturer of stick and tissue flying and static models. In the 1930s Great Depression, they lead the low-priced kit revolution with the "Dime Scale" kits and famous advertisements in Model Airplane News magazine and others. Comet reached it's peak in the 1930s when they acquired the services of Carl Goldberg. Goldberg was a highly accomplished modeler with articles in Model Airplane News and famous designs that won him several National level competitions in the 1930s and beyond. (Carl Goldberg went on to found his own company and produced well designed and popular free-flight and RC aircraft). Comet survived the post World War economic slump and continued kit production until they were bought out by long-time competitor Guillow's in 1998.

OldModelKits SS Rex Ocean Liner - With Real Wood Deck - Italian Line / Mid To Late 1930s, 1/350

Resin Model Kit,   Box Condition: Exc+

$669   

Finally, the Pride of the Italian Line in 1/350 scale! The SS Rex is from the same team that brought you the 1/350 SS Normandie Ocean Liner. This four year project is a 100% new model and represents the Rex in her glory years of the mid 1930s. All design work was done in CAD by Ken Friend, a master modeler, designer and builder of experimental engines and test equipment and an engineer who specialized in CAD/CAM/CAE Systems Management and Implementation. All of the smaller parts are printed on ultra-high resolution 3D SLA resin printers. These parts meet and often exceed what is possible with injection molded plastic. Only the larger parts (hull, deck pieces and funnels)are cast resin. These are pressure-cast from de-aired molds to minimize air bubbles. The Italian Line advertised that "The Southern Route Is the Lido Deck Route." By virtue of avoiding the stormy and cold North Atlantic, travelers experienced a true outdoor lifestyle. The Rex was intentionally designed for this. For this model, extensive research and time was spent capturing the exact look of the colorful 1st and 2nd Class Aft Pool Areas- from the changing room & showers, grab rope on the pool, pool slide, stairs & diving boards, tables with umbrellas, recessed (covered) 1st Class Restaurant/Lounge and more. Because of the superior performance of 3D Printing, over 90% of the usual PE (photoetched) metal parts are now 3D printed resin. This is a vast improvement as they are no longer flat, but are true to the shape of the prototype. This also makes for a nearly complete model "out-of-the-box." Includes a real wood deck. NOTE: railings are the only parts not included with the model shown. However, 1/350 PE ship railings are very easy to locate from a large number of sources; I will refer the buyer to the ones that I like to use but you can always use your preference.