Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

  Plastic Model Kits

Airfix Harrier, 1/72, 266

Plastic Model Kit,   Box Condition: Exc

$16   

1960s type three logo issue. Hard-to-find accurate kit of an early Harrier. Features pivoting engine nozzles, optional position landing gear and a very wide variety of bombs, tanks, rocket launchers and missiles for loadout. The kit has never been started. Inventoried 100% complete with all parts decals and instructions. NOTE: one drop tank is short shot. All other parts are perfect.

Sealsmodel Hashidate and Itsukushima ( Matsushima Class oProtected Cruisers) - Two Ship Kits, 1/700, SMP003800

Plastic Model Kit,   Box Condition: Exc+

$32   

Sale Pending
Email for availability.

Includes both cruiser kits. Very highly detailed and finely molded waterline models. The kits have never been started. They have been inventoried complete with all parts and includes flags and instructions. The Matsushima class consisted of three ships - Matsushima, Hashidate and Itsukushima. These three ships were the primary Japanese Naval force during the First Sino-Japanese War. On the advice of the French military adviser Louis-Émile Bertin, these ships were light, fast, thinly armored but had a huge main gun. The first of the class was built in France and delivered in 1891. While the basic design sounded good, it was not workable in service. The boilers also proved defective, with Itsukushima's failing during the delivery voyage. It was only after a prolonged stay in Ceylon and a visit by a French emergency team that she eventually made it to Japan. The Japanese wisely upgrade the boilers but the basic design could not be changed. But as the most modern ships in the fleet, they were destined for very active service. In the First Sino-Japanese War, they were certainly enough to overwhelm the inferior Chinese ships. Although badly outdated, the sisters were also very active in the Russo-Japanese War.

Sealsmodel Mikasa Pre-Dreadnought Battleship, 1/700, SMP0013800

Plastic Model Kit,   Box Condition: Exc++

$36   

Very highly detailed and finely molded waterline model. The kit has never been started. It has been inventoried complete with all parts and includes instructions. Mikasa was the only ship of her class and took parts in the Sino-Japanese war. In the late 1890s the Japanese shipyards were not quite yet ready for such a project, so the Navy contracted with Vikers in Great Britain to build this ship, which is actually a highly modified Formidable class. Mikasa saw a great amount of action at Port Arthur and the Battle of the Yellow Sea. She was preserved as a museum ship in 1923. Mikasa suffered from neglect during and after WWII, but was restored to her former glory in the 1950s after a campaign led by the Japan Times and Admiral Chester Nimitz. The Mikasa is the only surviving pre-dreadnought in the world.

Sealsmodel Fuji Pre-Dreadnought Battleship, 1/700, SMP0103800

Plastic Model Kit,   Box Condition: VG+

$42   

Very highly detailed and finely molded waterline model. The kit has never been started. The parts are still in the internal factory sealed bags and includes flags and instructions. Fuji was a very famous and active Japanese capital ship. In the late 1890s the Japanese shipyards were not quite yet ready for such a project, so the Navy contracted with Thames Iron Works in Great Britain to build the class of four. Fuji took parts in the Russo-Japanese War (1904–1905) in the Battle of Port Arthur with her sister Yashima. Fuji then engaged Russian forces in the Battle of the Yellow Sea and Tsushima. In 1910 she was designated a coastal defense ship in 1910 and served in a training roll. She was hulked in 1922 and actually survived WWII to be scrapped in 1948.

Aurora McDonnell F-4H Phantom, 1/48, 394-198

Plastic Model Kit,   Box Condition: NM-

$135   

First issue from 1961 with the sunburst oval logo and 'Famous Fighters' in the border. Large scale kit with fantastic Jo Kotula box artwork. The box is exceptional with factory-new color and gloss, no tape or tags, four solid corners and no fading. It does have very light general wear, mainly on the sides. Nicely detailed kit for 1958 with cockpit, full landing gear, four AIM-7 Sparrow missiles and a large, clear 'Triangle World' display stand. Even includes a tiny two-piece F-4 model that is almost 2 inches long. Molded in gloss gray and clear. The kit has never been started. Inventoried 100% complete with all parts and including decals and instructions.

Aurora McDonnell F-4H Phantom, 1/48, 394-250

Plastic Model Kit,   Box Condition: VG

$95   

Third issue dated 1961 but actually from '64 or '65 judging from the oval logo with no 'Famous Fighters' and the 250 price extension. The box has excellent color and gloss, four solid corners, no tape/tape marks and no price tags or tag marks. It does have light general wear, edge wear and a very light crease at the upper right as flaws. Large 1/48 scale early Phantom kit with great Jo Kotula box artwork. Nicely detailed kit for that time with cockpit, full landing gear, four AIM-7 Sparrow missiles and a large, clear 'Triangle World' display stand. Even includes a tiny two-piece F-4 model that is almost 2 inches long. Molded in gloss gray and clear. The kit has never been started. Inventoried 100% complete with all parts and including decals and instructions. This model includes a tiny two-piece scale Phantom model as well as the big one.

Heller Submarine Cruiser NN3 Surcouf, 1/400, 1074

Plastic Model Kit,   Box Condition: Good

$24   

Includes the best article I have read a about this unique submarine. Surcouf was a huge 360 foot long submarine cruiser with twin 8 inch guns, heavy AA guns, torpedo tubes for two different diameter torpedoes and a seaplane/hanger. The advanced design had a range of 10,000 miles but experienced many critical teething and design issues. Due to this fact, she was the only ship of her class. Her fate is unknown except that she may have sunk in the Gulf of Mexico. Nicely molded full-hull kit from the 1970s. Includes seaplane. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

AMT XB-35 / YB-35 Flying Wing, 1/72, 8615

Plastic Model Kit,   Box Condition: Fair

$27   

Builds either version of Jack Northrop's famous flying wing bomber. The kit has never been started. The gray plastic parts are all still in the factory sealed bags. NOTE: the clear parts were not factory sealed are missing a nearly flat panel (easy to make) and the main cockpit bubble (not easy to make). Otherwise complete and includes the paperwork, which is still factory sealed.

Renwal The Visible Airplane Engine WASP 9 Cylinder Radial by Pratt & Whitney, 1/4, 809

Plastic Model Kit,   Box Condition: Good-

$1200   

From the late 1950s. Very large (1/4 scale) and highly detailed kit. By far the finest working visible aircraft engine kit ever made. Comes with electric motor, gear and battery boxes and all hardware. Transparent housings permit viewing the correctly working pistons, valves, rocker arms, connecting rods, cam and gears in action with synchronized firing of the spark plugs using red electric bulbs. Propeller also changes pitch. Kit is molded in clear, red, black, blue metallic and gray plastic. Inside, the kit is as it left the factory. The inner (bottom or tray) box is excellent, and all cardboard inserts and clear panels are intact as shown and display very well. The outer box has seen significant wear as you can see. It had closed splits along the seams (corners and one side) and I correctly fixed those from the inside with card stock and book binding glue. The kit has not been started. It has been very carefully inventoried and the plastic parts are 100% complete. The metal parts and bulbs are all still in factory sealed envelopes. The Renwal cement is present and mint. Includes all the factory paperwork- instructions, parts sheet, yellow lubrication warning, small Renwal catalog and special booklet on 'The Aircraft Engine and How It Operates.' All of these are in 'excellent' to 'near mint' condition. It is amazing that this kit is complete - most of these models, even if still factory sealed, are missing parts due to poor packing procedures.

Entex Type 41 Bugatti Royal Coupe de Ville - 'The Biggest Most Expensive Car Ever Made', 1/16, 8451

Plastic Model Kit,   Box Condition: VG+

$150   

From Bandai molds. Very highly detailed, large-scale kit with over 250 parts. Features rolling chassis construction just like the actual car, highly detailed engine, suspension, exhaust, steering linkage and driveline, complete interior with opening front and rear doors, detailed engine compartment and opening hood and more. Molded in black, red, wood tan, clear, butterscotch and with three large trees of chromed parts and rubber tires and ignition wire. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Revell Boeing 720 Jet Flagship United, 1/144, 85-0243

Plastic Model Kit,   Box Condition: VG

$32   

Dated 2000. Reissue of the old 1960s kit. Features optional position landing gear, movable rudder, optional position doors and clear Revell 'Globe' stand. Large very nicely done sheet of colorful United decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

AMT Chevrolet 1955 Corvette - Stock or Drag, 1/25, T287

Plastic Model Kit,   Box Condition: VG

$54   

Nicely molded and detailed kit featuring all parts for stock or race versions. Custom features include 2x4 carbs, chrome valve covers, headers, four speed shifter, steering wheel, headlight fillers, drag grille, rear spring shackles, extended shocks, traction bars, wheels and rims and more. Kit includes working hood, detailed engine/chassis and interior, removable hardtop and decals. Nicely molded in chrome, white, clear and rubber. Never started. The chrome and white parts are still in the factory sealed bags and includes clear, tires, decals and instructions.

AMT 1937 Chevrolet Convertible - Stock or Street Rod, 1/25, T316-200

Plastic Model Kit,   Box Condition: VG

$39   

Older issue from the 1960s with fantastic box art titled 'Staging Area.' Very well detailed kit can be built one of two ways - stock or racing. Includes extensive customizing and racing parts. Features detailed Stovebolt 6 engine with stock carbs or dual carbs with chrome air cleaners, stock or chrome valve cover, blown 427 engine, detailed engine compartment with removable hood and custom clear plastic hood, very good chassis detail with separately molded front springs with shocks, front axle, brake backing plates, steering arm, tie rods, racing link, drive shaft, rear axle and springs and exhaust, choice of stock or racing wheels, Cragar racing wheels with trim rings, complete stock interior or custom interior with buckets, roll bar, shoulder harness and custom wheels, shifter and dash, optional position stock convertible top, numerous custom body parts and a very large sheet of decals. Molded in white, clear, red-tint clear, chrome and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (chrome and clear) have been inventoried complete including decals and instructions.

AMT 1970 Chevrolet Chevelle SS 454, 1/25, 8940

Plastic Model Kit,   Box Condition: Sealed NM

$42   

Still factory sealed. 1994 issue with over 80 parts. Molded in gray, clear, red tint clear, chrome and with rubber tires. Includes parts for stock or custom versions. Features detailed engine and engine compartment, removable hood, detailed chassis and full interior

Frog DH Hornet F.Mk.3 Long Range Fighter, 1/72, F239

Plastic Model Kit,   Box Condition: VG+

$20   

Very finely molded. Excellent full color painting guide is located on the bottom of the box. Has markings for No 41 Sqn, RAF Church Fenton, Yorkshire 1950 or No. 19 Sqn., RAF, Church Fenton, Yorkshire, 1950. Never started. Inventoried 100% complete with all parts, decals and instructions.

Revell Hawker Siddeley Harrier - RAF or US Marines VMA-513, 1/32, H194

Plastic Model Kit,   Box Condition: Good-

$79   

1973 issue. Large 1/32 scale kit measures 17 inches long when assembled. Contains decals for both RAF and US Marines version. Features detailed rotating side jet nozzles, detailed engine, removable engine inspection panel, optional position landing gear, optional position speed brake, full cockpit with pilot, underwing loadout of rocket pods and drop tanks, opening canopy and movable wheels. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.

Monogram 1967 Chevrolet Corvette 427 - 1/12 Scale Stock / Drag Strip / Street Racer, 1/12, 2801

Plastic Model Kit,   Box Condition: Sealed Exc+

$129   

Still factory sealed. Well detailed, large-scale kit from 1987. Includes parts to make one of three different versions. Features fully detailed 417 engine and engine compartment, opening hood, detailed chassis, suspension and exhaust, full interior and choice of three different 427 configurations including stock 3x2, single 4 bbl and blown. Other custom parts include Center Line Wheels, Goodyear Street Eagles and drag slicks, custom manifold and rocker covers, roll bar, fire extinguisher, pro hood and scoop and more. Molded in red, black, clear, chrome and with rubber tires.

Airfix DeHavilland DHC-1 Chipmunk - RAF or RCAF - Bagged, 1/72, 134

Plastic Model Kit,   Box Condition: Sealed Exc++

$28   

Still factory sealed with an 'Excellent+' condition header and the T3 logo. From the 1960s. Has decals for both version.

AMT-Frog Blackburn Shark Torpedo Bomber - RAN / Canadian / Portugal, 1/72, A605-80

Plastic Model Kit,   Box Condition: Sealed Exc++

$28   

Still factory sealed. Rare short-lived AMT marketing promo to sell Frog kits in the USA. Older kit with very high quality moldings and fine detail. The very sturdy Shark was the final biplane torpedo bomber for the FAA, with 238 delivered after production began in May of 1935. Features decals for three aircraft- British Fleet Air Arm, Portuguese Navy (6 were delivered) and one of the 20 Shark license built by Boeing for Canada. Kit features movable control surfaces, prop, wheels, optional floats or wheeled version and torpedo and bomb loads. With color painting guide on the back of the box.

Pioneer 2 Beechcraft Kansan AT-11 - USAF or Turkish, 1/72, 4-4009

Plastic Model Kit,   Box Condition: Exc

$28   

Has decals for both versions. Well detailed and molded. Has all recessed panel line detail and interior. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.