Flyline Models Earl Stahls Howard - 24.5 inch Wingspan for Rubber Free Flight or CO2 Power, I09
Wood Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Stick and tissue flying model airplane kit. Flyline Models was a manufacturer out of Fairfax, Virginia USA. The models are known for their high quality. The kit contains full size detailed plans/instructions, high quality printed balsa sheets, decals, wheels, tissue and more.
Sterling Curtiss P-6E Hawk - 16 inch Wingspan Flying Model Aircraft that Drops Bombs in Flight, A10
Wood Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. 16 inch wingspan kit for free flight or control line. Includes innovative system for automatically dropping bombs in flight. Sterling was a famous manufacturer dating back to the 1930/40s flying model craze. Although they continued to produce kits for decades after the flying model slump following World War II, they eventually fell victim to the general lack of interest in modeling that occurred in the early 1980s. I always considered Sterling kits to be deluxe kits as they featured color decals, high-grade die cut balsa, vacuform plastic detail parts, plastic wheels (if required), finished wire landing gear, rubber motor and plastic prop, full size plans with instruction details and instructions for conversion to control line.
Cal Aero-Model Playboy Senior (Reproduction) - 36 inch Wingspan Wooden Flying Aircraft
Wood Model Kit, Box Condition: Exc++
Sold
Smaller scale repro kit of the famous Cleveland Playboy Senior. For .020 power free flight or RC. This model came from the estate of a very active and particular early aircraft kit collector. It is like factory-new inside and has not been started. Complete with all parts, plans and decals (if originally included). Designed for 'Sniffing Thermals', the honored pastime of a generation of model enthusiasts. Flying model aircraft predated powered flight; however, balsa wood and printwood were not introduced until the early 1930s and the hobby took off, as well as the hunt for thermals. Gas flight began in the early 1930s, and powered models (most all driven by Brown engines) took home so many awards that they were forever separated in competition from rubber powered models. Design of gas models was tricky since RC (radio control) models could not yet be applied to the mass market; so a gas model had to not only fly and climb under power, but then glide sufficiently - all in a stable fashion and without any operator inputs once the airplane took off.
Hasegawa Nakajima Ki-27 Nate, 1/48, JT24
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. Large scale (1/48) Nate with 46 pieces. Excellent detail and moldings.
Aurora Wolf Man - Universal Pictures, 1/8, 425-98
Plastic Model Kit, Box Condition: Exc-
Sold
Very rare original issue hardbox kit from 1962. The box is in excellent condition with great color and gloss. The box does have light shelf wear, light creases and corner wear. All four corners are solid and there are no tape or price tags or marks. Inside, the kit is molded in the correct dark gray. It has never been started. It has been inventoried 100% complete with all parts. The instructions are in mint condition.
Aurora F7U Cutlass, 1/70, 496-49
Plastic Model Kit, Box Condition: NM++
Sold
1957 to 1959 issue. Inventoried 100% complete with all parts decals and instructions.
Top Flite Bell P-39 Airacobra - 60 inch Wingspan Scale RC Airplane for .4 to .6 Engines, RC-18
Wood Model Kit, Box Condition: Exc+
Sold
Very large stand-off scale P-39 that can be built as USAAF or RAF. Ideal for electric conversion. Weight is 5.5 to 6.5 lbs built. Contains many prefabricated parts to speed assembly. This model came from the estate of a very active and particular early aircraft kit collector. It is like factory-new inside and has not been started. Complete with all parts, plans and decals (if originally included). NOTE: this kit was factory packed in a rugged and sturdy box. The model will be shipped with this box only (no external box) unless you request otherwise.
Lindberg Bangster Custom Hot Rod, 1/32, 138
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. One piece box issue from the mid to late 1960s.
Revell USAF B-52 with NASA X-15, 1/175, H273-130
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Dated 1964. Soft box release from 'Jet Command' Series. Kit includes Revell's original Pre-S B-52 model with a new stand, unique decals and the special starboard wing pylon for the X-15, and of course a scale X-15.
Strombecker Ryan PT-19 USAAF Trainer - Flying Model 15 inch Wingspan, 1/28, FM3-150
Vacuform Model Kit, Box Condition: Good+++
Sold
Large scale (1/28) PT-19 model. In addition to a fine line of solid wooden models and a handful of injection molded kits, Strombecker branched out into flying models. One feature of this line was some fantastic box art by Cal Smith. This kit contains vacuform plastic parts (38 total) and has a wingspan of 15 inches. Power is by rubber band motor with a plastic prop. The kit has not been started and is complete. Includes all plastic/metal parts, full decals and complete instructions.
RCM Go-229 Horten, 1/32
Vacuform Model Kit, Box Condition: Bagged
Sold
SPECIAL ORDER vacuform kit. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Kit includes resin and/or metal details -clear canopy and full size plans/instructions. Details included will vary from kit to kit but may contain landing struts - wheels - props - engines (not jets) - some cockpit parts - seats - etc. Other parts will need to be scratch built or from your spares box. Decals not furnished. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.
Microscale Convair 880 Delta TWA or CAT (Taiwan) Decals, 1/144, MS4-5
Resin Model Kit, Box Condition: VG+++
Sold
Ex-Topping molds. Resin kit with large colorful decals (TWA, Delta and CAT)and stand. The kit has never been started. Internal factory sealed bag or inventoried 100% complete including decals and instructions. NOTE: Decals are flaking badly
Italeri Lockheed F-104 Starfighter Cockpit with Verlinden Cockpit Instruments, 1/12, 2991
Plastic Model Kit, Box Condition: Exc++
Sold
Hard-to-find. This ex-ESCI mold F-104 cockpit is a large 1/12 scale highly detailed kit of the entire cockpit as shown on the box art. As you can imagine, this scale allows every knob and switch to be duplicated. Also includes is Verlinden Productions C112-002 F-104 Cockpit Instruments which is a detail set designed specifically for this model. This kit has never been started. It is either still in the internally sealed factory bag or has been inventoried 100% complete with all parts, decals and instructions.
Aurora Douglas F4D Skyray, 1/88, 292-50
Plastic Model Kit, Box Condition: NM+
Sold
The kit features a box in fantastic near mint condition. Color and gloss are as new. The box is dated 1957, but the blue oval logo dates this much closer to 1961. This 50 cent issue is a slightly larger box than 29 cent release. Never started. Factory sealed box/bag or 100% inventoried with all parts decals and instructions present.
Revell North American A-5A Vigilante Strategic Air Power Issue, 1/82, H134
Plastic Model Kit, Box Condition: Exc++
Sold
1969 issue. This is the about the fourth (perhaps fifth?) issue of the Vigilante bomber "S" kit that Revell first produced in 1959. This model marked a turning point in Revell kit quality. Features all recessed panel lines, excellent scale detail, opening tandem canopies, moving control surfaces, detailed, removable jet engines and two pilots. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Revell Douglas A3D (A-3) Skywarrior Advent Issue, 1/84, 3355
Plastic Model Kit, Box Condition: Sealed Mint
Sold
Still factory sealed. 1970s Advent issue of the original "S" kit from the 1950s. Features folding wings and tail, optional position landing gear and speed brakes, escape hatch, three crew figures and refueling probe.
Nitto Grumman Hellcat F6F-5 - (F6F5) Motorized, 1/75
Plastic Model Kit, Box Condition: VG++
Sold
Rare early Nitto kit from the late 1950s/early 1960s. High gloss box top with very collectible artwork. Very nicely molded kit for the time. Features retractable landing gear, rotating wheels, folding wings, working rudder and ailerons and a rubber band powered propeller. The model as never been started. The parts are either still in the factory sealed bag or have been inventoried 100% complete with all parts, decals and instructions.
Revell Hawker Hurricane, 1/72, H616-49
Plastic Model Kit, Box Condition: NM+
Sold
1962 issue in the early two piece box and frameable box artwork. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.
Airmodel Convair XF2Y-1 Sea Dart - Bagged, 1/72, 183
Vacuform Model Kit, Box Condition: Sealed
Sold
Still factory bag sealed. Nicely molded with fine recessed panel lines and clear canopy. Basic airframe components only. Never started and complete. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.
Airmodel Vought F7U-3 Cutlass - Bagged - (F7U3), 1/72, 156
Vacuform Model Kit, Box Condition: Sealed
Sold
Basic vac kit with main airframe parts and clear canopy. Well detailed moldings with recessed panel lines. Complete and never started. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.