CA Atkins Phonix D-I / D-II, 1/72
Metal Model Kit, Box Condition: VG
$34
Rare, limited issue, very high quality cast metal kit. Has parts for either D-I or D-II variants. Includes full instructions. Never started. The parts are still in the factory sealed bag.
Airmodel Yak-15 Conversion (from Yak-9), 1/72, 195
Vacuform Model Kit, Box Condition: VG
$6
Very finely molded conversion with recessed panel lines; better mold quality than many injection molded kits. In white and clear plastic with instructions/plans. Never started. Complete with all parts and instructions. Conversion kits require a base injection molded kit (not included; Airfix Yak-9 is recommended) to complete. Vac kits are only recommended for experienced modelers and some scratchbuilding may be required.
MPC Dodge D-50 Pickup Truck, 1/25, Q1-10753
Plastic Model Kit, Box Condition: Sealed Exc
$54
Still factory sealed. Dated 1980. Can be built stock or custom with many optional parts such as roll bar, sun roof, rear bucket seats, custom wheels, etc. Includes opening hood, detailed engine with optional turbocharger, and more. Molded in color, clear, chrome and rubber.
Aurora Cutty Sark Clipper Ship, 1/260, 432-198
Plastic Model Kit, Box Condition: Fair
$45
Excellent builder kit. Nicely molded, smaller scale full-hull kit. Kit features molded rat lines, detailed deck and fittings, display stand and rigging instructions. Molded in green, wood tan and black. The kit has never been started. Inventoried 100% complete with all parts including flag sheet and instructions. NOTE: the smallest yard has 1/3 of the tip broken off and that tip is missing.
Hobby-Time McDonnell F3H-1 Demon Shipboard Interceptor - (F3H1), 1/45, 2003
Vacuform Model Kit, Box Condition: VG
$65
Rare large scale Demon. Very close to 1/48; measures 15.5 inches long when assembled. Can be built as a flying model with retracted landing gear or a static model with extended landing gear. Features recessed panel line detail, vacuform main parts, injection molded details, clear canopy, catapult launcher and decals. The kit has never been started. Inventoried 100% complete including decals and instructions.
Sanwa B-26D Invader Bomber - (A-26 / A/B-26), 1/110, 514
Plastic Model Kit, Box Condition: Sealed Exc-
$58
Still factory sealed. Dates from the early 1960s and very hard to find. The scale is approximate. The kit is dated by the 'Tokyo Plamo' logo, which was used between 1960 and 1964. Sanwa was one of Japan's earliest post-WWII kit producers, making model kits in the 1950s; some sources say 1955. Kits were marketed under Sanwa and Tokyo Plamo, with the general consensus being the the later logo came out around 1960 or later. Production ended in 1964, making all Sanwa kits rare and collectible. The entire line was extensive. It included very small scale tanks (some that were motorized), battleships in three scales with the larger ones motorized with dual prop drive, slot cars, civil sport boats and an electric outboard, a full line of hand gun models that actually shot plastic bullets, two fighter groups and bomber groups (probably Monogram), several different lines of scale aircraft, missile kits, scale (static) car models of early Japanese automobiles, at least 7 flying model aircraft that had electric and rubber motors, a 'Super Control Stand' P-51 that moved with a joystick and had an electric propeller and sound unit, two different lighthouses and a windmill, an air cushion boat, motor cycles, a diving submarine (electric) and a working (rubber band) George Washington Class SSBN and even a garden tractor with an electric motor. There was even a cut away 727 in big 1/96 scale and an Airport Set with a Cessna 180 and Bell 47D Helicotoper. Just before going out of business, Sanwa issued some kits in conjunction with the 1964 Tokyo Olympic games - these kits even included a copy of an Olympic medal.
Faller Noratlas 2501 Motorized - Luftwaffe, 1/100, 1501
Plastic Model Kit, Box Condition: Good
$55
Rare kit from the 1960s designed for dual electric motor drive with the Faller no. 1001 Miniature Electric Motor (not furnished; Faller sold the motor separately). Nicely molded for the time featuring rotating propellers, positionable ailerons, rudders and elevator, optional position rear boarding door and forward crew boarding door, rear drive-on boarding ramp, clear side and cockpit windows and more. The kit has never been started. The small and motorizing specific parts are still in the internal factory sealed bag. The other parts were never sealed and have been inventoried complete including decals and instructions.
Aurora British Churchill Tank, 1/48, 327
Plastic Model Kit, Box Condition: Sealed NM
$95
Still factory sealed. 1972 Big A softbox issue is in investment-grade condition. Features elevating gun, rotating turret, figures, operating treads and bogies and battlefield display stand.
LS Mitsubishi A6M5 Type 52 Zeke, 1/72, 6
Plastic Model Kit, Box Condition: Good-
$26
Very early LS kit dating from the start of the 1960s. Even at this early date, you can see why LS became legendary for quality. Features well molded parts with all fine recessed panel lines, decals for several aircraft, moving rudder, wing flaps and ailerons, choice of drop tank or bomb, sliding canopy, retracting landing gear and decals for a large number of aircraft. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. Even the original glue is present. Please note, this box has closed tears and damage to the upper right. The fact that Hasegawa still uses some LS molds testifies to their detail and accuracy.
Faller Junkers Ju-87 Stuka Motorized - Dive Bomber or Anti-Tank, 1/100, 1087
Plastic Model Kit, Box Condition: VG
$55
Rare model kit from the early 1960s and nicely molded for that time. It is designed to be motorized with the Faller No. 1001 Miniature Electric Motor (not included, Faller sold it separately.) Features parts to built either version, cockpit with crew of two and rear machine gun, wing cannon, main centerline bomb load, small wing-mounted bombs and a large decal sheet for multiple aircraft. Molded in a stunning swirl green and butterscotch brown, gray, orange-yellow, red and with clear canopy & display stand. The kit has never been started. The small parts (with motorizing-specific parts) are still in the factory sealed bag. The parts that were never factory sealed have been inventoried complete, including decals and instructions. Even the Faller packing quality inspection slip is still present.
Premiere Shorts Tucano T.MK.1, 1/72, P1001
Plastic Model Kit, Box Condition: Good++
$19
This RAF Trainer aircraft is cleanly molded and detailed with recessed panel lines. Never started. Factory sealed bag with decals and instructions.
Aurora Ryan X-13 Vertijet With Trailer And Launcher, 1/48, 376-198
Plastic Model Kit, Box Condition: VG
$425
Old hobby shop stock that has never been up for retail sale. Very rare kit dated 1957; first and only issue. Very nice, large-scale model for that time with a fully operational mobile operations trailer. The aircraft is molded in gloss silver & clear while the trailer/launcher is bright yellow. The kit has never been started. When you open the box, it is exactly as it left the factory down to the packing tissue paper. The silver parts (aircraft) are still in the factory sealed bag. The yellow parts and clear canopy were never factory sealed and are inventoried complete. Includes 'excellent' condition decals and instructions. The box grades 'very good' which is rare for this kit. The red color is in unusually good shape, which is rare; as you may know, it usually ages poorly. The colors are bright and vibrant, all four corners are solid with no repairs, there is no fading, no tape, no price tags and no stains. Flaws include edge wear as shown and 3 small litho chips as well as creases visible at the lower left corner and center right. Although not perfect, it is one of the best I have seen.
Nichimo Mitsubishi A6M5 Reisen Zero Type 52, 1/48, S-4803-200
Plastic Model Kit, Box Condition: Good-
$24
Early to mid 1960s model with collectible high-gloss box art. Nicely molded and detailed for that time with fine recessed panel lines and fine raised rivet detail. Features retractable landing gear and closing gear doors, very nice cockpit detail with side panels and other cockpit equipment, moving rudder, elevator, ailerons and wing flaps, three piece canopy, drop tank, excellent full color painting guide and decals for several aircraft. The model as never been started. Inventoried and NOTE: missing one small part, ADF loop antenna. Otherwise complete with all other parts, decals and instructions present.
Dumas Curtiss P-6E Hawk - 17.5 inch Wingspan For Rubber Power or Electric And R/C Conversion, 219
Wood Model Kit, Box Condition: Sealed Mint
$28
Still factory sealed. Excellent wooden kit designed for rubber power but can also be converted to electric and R/C with modern small components. Features hand-selected laser cut balsa, contest rubber and plastic prop, vacuformed details, color decals, full size plan, hardware, lightweight colored tissue and full step by step instructions.
Duracraft Inc Dura-Plane With Extras - 45 Inch Wingspan R/C Trainer Quick Build
Metal and Plastic Model Kit, Box Condition: VG
$119
Very rugged and crash-survivable R/C trainer that is easy to build. Features 45" molded foam wing, durable PVC fuselage, aluminum main channel, aluminum landing gear and all hardware included. Designed for .20 to .40 two cycle power and a 3 to 4 channel radio. Building time is estimated at 6-10 hours. Includes highly illustrated instructions for building and radio installation. Iron on covering is not required. Never started. The parts that were factory sealed are still in the sealed internal bags. The parts never sealed have been inventoried complete with all paperwork. Includes the following after-market extra parts: (2) 2.5 Inch Wheels, Du-Bro #140 5/32" plated brass Dura Collars (sealed), Du-Bro fuel tank (sealed), Blue Line Silicone thick fuel line (sealed) and a big sealed package of R/C Latex Foam for shock mounting equipment. NOTE that this item will be shipped in the factory-original sturdy shipping box unless you specify otherwise. If you do wish to have it boxed, extra shipping will apply.
Dumas P-26 Peashooter - 17.5 inch Wingspan For Rubber Power or Electric And R/C Conversion, 223
Wood Model Kit, Box Condition: NM
$26
Excellent wooden kit designed for rubber power but can also be converted to electric and R/C with todays small components. Features hand-selected laser cut balsa, contest rubber and plastic prop, vacuformed details, color decals, full size plan, hardware, lightweight colored tissue and full step by step instructions. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.
Pegasus Supermarine Spitfire F22/24 - 603 'City of Edinburgh' Sqn 1950 - Bagged, 1/72, 002
Plastic Model Kit, Box Condition: Sealed
$16
Still factory sealed. Limited edition injection kit. Features very nice moldings with fine recessed panel lines and full decals.
AMT 1965 Buick Riviera 3 in 1 Kit Movie 'Villa Riviera' George Barris, 1/25, 6555-200
Plastic Model Kit, Box Condition: Fair
$125
Early issue hardbox. Legendary AMT 3 in 1 kit can be built stock, custom or competition. George Barris served as the AMT consultant for the customized kits, and designed and built the 'Movie Car of the Year' for the movie Villa Riviera. This model will build the stock, Barris Custom or Barris' movie version. Model includes numerous optional parts for suspension, motor, exterior and interior as well as custom decals. Includes a special clear display stand also. Molded in white, clear and chrome with rubber tires and metal axles. Never started. Inventoried 100% complete with all parts, vinyl material, decals and instructions. NOTE: box looks better than the 'fair' grade but it is graded that low because there is a large stain and box damage to the lower left long side and short left side of the box top. Additionally, there is identical damage to the tray (lower box) and I would grade it 'fair-.' NOTE: the instructions have only very minor bug damage but the decals have significant damage and are only 70% intact (about 30% destroyed).
Constructo Clipper Great Republic - Highly Prefabricated 20 Inch Long Wooden Ship, 1/265, U601
Multimedia Model Kit, Box Condition: VG
$129
20 inches long and 11.5 inches high when assembled. Constructo kits are the finest of all the older prefabricated wooden ship kits. Features a completely shaped and sanded hardwood hull with predrilled mast, bowsprit, anchor chain and pedestal mounting holes, finished wood display stand, finished and painted stand pedestals and mounting nails, a large sheet of heavy cardboard with dozens of completely cut and finished and numbered hardwood parts held on with string, a factory sealed bag of fully finished fittings of metal, wood and plastic, numerous other hardwood parts completely cut to shape and numbered, deadeyes and blocks, paint and glue, wood stock as required and a complete set of sewn, ready-to-install cloth sails, black and white standing and running rigging thread, instructions in English and a full size plan sheet with many views, complete part identifications by number and excellent rigging diagrams. The kit has never been started. All the small parts are still in the factory sealed bags or factory-tied to the display piece. Only the hull was not factory sealed. With full size plans and instructions. Constructo kits were made in Spain and early issues in the USA were marketed by Constructo Nautical Miniatures, Inc, New York 1. There were many series of kits issues by size; some smaller and some larger than this kit.
Airfix Dornier Do-217 E.2 - Craftmaster Issue, 1/72, 1402-100
Plastic Model Kit, Box Condition: Good++
$24
Action-packed artwork shows a British fighter in a hot gun battle with the main Do-217, which is receiving major damage. Another Do-217 released its bomb load, while the starboard wing on another snaps away in flames as the crew hits the silk. Kit features movable elevators, rudders and ailerons, elevating gun and rotating turret, cockpit detail, four crew members and rotating wheels and props. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.