Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Hasegawa Mitsubishi A6M5 Zero Fighter Type 52 - Strange Insignia USA / UK, 1/48, SP10

Plastic Model Kit,   Box Condition: Sealed Exc

$24   

Still factory sealed. Limited edition dated 1989. Features a nicely detailed but older Zero model with some fascinating markings. One is a USA TAIC aircraft, most likely for evaluation and the other is a UK aircraft with 'ATAIU SEA' on the side in large letters.

Hasegawa Mitsubishi A6M5 Zero Fighter Type 52 - Strange Insignia USA / UK, 1/48, SP10

Plastic Model Kit,   Box Condition: Good+

$22   

Limited edition dated 1989. Features a nicely detailed but older Zero model with some fascinating markings. One is a USA TAIC aircraft, most likely for evaluation and the other is a UK aircraft with 'ATAIU SEA' on the side in large letters. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Grumman F6F-3 Hellcat - (F6F3) Catmouth, 1/48, JT120

Plastic Model Kit,   Box Condition: Sealed Exc

$32   

Still factory sealed but the seal has a split on the right side. Very highly detailed kit with all fine recessed panel lines.

William H Low Co La France Aerial Ladder New York Fire Department Truck Circa 1900 - Wilo Line Fire Truck, 1/24, FL10

Multimedia Model Kit,   Box Condition: VG+

$179   

Very, very rare and the flagship kit of the line. Likely from the 1940s. William H Low Co., of Braintree Mass., issued the 'Wilo Line' which included a superb series of antique commercial firefighting equipment. The scale is given as 1/2" and the finished wagon is over 14 inches long with the ladders, and even bigger with the 6" front carriage bar. The kits were very advanced for the time and shared many of the pre-fabrication methods of Hudson Miniatures. This kit is based on the La France prototype made for the NYFD around 1900. Please note this is a full operating model and not for the faint of heart! Features plastic injection molded spoke wheels, precut large hardwood parts, fully formed hardwood ladder frames that are drilled for the pre-cut ladder rungs, extinguishers, lanterns and much more, two clear factory-sealed small parts bags including a great many fully cut or carved wood ones, metal parts and even plastic parts. Also includes brass screen material metal stock, complete instructions with detailed plans and full text step-by-step guide, painting notes and even a photo of the actual prototype. The kit has never been started. The small parts are still in the factory sealed bags. The parts that were never factory sealed have been inventoried complete including instructions/plans. The kits in this line include CH110 Combination Hose Wagon, FC15 Chemical and Reel Carts, F16 Horses in the same scale, CL120 Hook And Ladder, CL120 (again) City Service Ladder (a completely different kit from the previous one), FC180 Combination Chemical Wagon, FH130 Hose Wagon, FP7 Amoskeag Steamer, CR110 Service Hose Reel, FL10 Aerial Ladder, F18 Chemical Engine and more. In most cases they are the only kits in existence of these historic vehicles. Bill Low did design at least one 'non-fire truck' kit in his Will-O-Line - a Conestoga Wagon, advertised as being 1/24 scale, kit #B14 for $2.85 list as "This is another Museum Piece by Bill Low." After seeing these fire truck kits, I do not doubt that.

William H Low Co Holloway Hook And Ladder Truck 1880 - Wilo Line Fire Truck, 1/24, CL120

Multimedia Model Kit,   Box Condition: Good+

$169   

Very, very rare. Mr. Low himself proclaimed this to be "...the handsomest in the Willoline." Likely from the 1940s. William H Low Co., of Braintree Mass., issued the 'Wilo Line' which included a superb series of antique commercial firefighting equipment. The scale is given as 1/2" and the finished wagon is well over 12 inches long with the ladders, and even bigger with the 6" front carriage bar. The kits were very advanced for the time and shared many of the pre-fabrication methods of Hudson Miniatures. This kit is based on the 1880 Holloway Manufacturing Company prototype. Features plastic injection molded spoke wheels, precut large hardwood parts such as completed tanks, fully formed ladder frames, pre-cut ladder rungs, extinguishers and more, a sealed bag of smaller parts including a great many fully carved wood with more of metal and plastic, brass screen, a variety of metal stock as needed, sandpaper, complete instructions with detailed plans and full text step-by-step guide and even a big photo of the actual prototype. The kit has never been started. The small parts are either internal factory bag sealed or inventoried complete; the parts that were never sealed are inventoried complete including instructions/plans. The kits in this line include CH110 Combination Hose Wagon, FC15 Chemical and Reel Carts, F16 Horses in the same scale, CL120 Hook And Ladder, CL120 (again) City Service Ladder (a completely different kit from the previous one), FC180 Combination Chemical Wagon, FH130 Hose Wagon, FP7 Amoskeag Steamer, CR110 Service Hose Reel, FL10 Aerial Ladder, F18 Chemical Engine and more. In most cases they are the only kits in existence of these historic vehicles. Bill Low did design at least one 'non-fire truck' kit in his Will-O-Line - a Conestoga Wagon, advertised as being 1/24 scale, kit #B14 for $2.85 list as "This is another Museum Piece by Bill Low." After seeing these fire truck kits, I do not doubt that.

William H Low Co Rumsey Light City Service Hook and LadderTruck Circa 1900 - Wilo Line Fire Truck, 1/24, CL120

Multimedia Model Kit,   Box Condition: Good+

$159   

Very, very rare. Likely from the 1940s. William H Low Co., of Braintree Mass., issued the 'Wilo Line' which included a superb series of antique commercial firefighting equipment. The scale is given as 1/2" and the finished wagon is over 14 inches long with the ladders, and even bigger with the 7" front carriage bar. The kits were very advanced for the time and shared many of the pre-fabrication methods of Hudson Miniatures. This kit is based on the Rumsey prototype first made just before 1900. Features plastic injection molded spoke wheels, precut large hardwood parts, fully formed hardwood ladder frames with pre-cut ladder rungs, extinguishers and more, smaller parts including a great many fully cut or carved wood ones, metal stock as needed, sandpaper, complete instructions with detailed plans and full text step-by-step guide and even a big photo of the actual prototype. The kit has never been started. Inventoried 100% complete including instructions/plans. The kits in this line include CH110 Combination Hose Wagon, FC15 Chemical and Reel Carts, F16 Horses in the same scale, CL120 Hook And Ladder, CL120 (again) City Service Ladder (a completely different kit from the previous one), FC180 Combination Chemical Wagon, FH130 Hose Wagon, FP7 Amoskeag Steamer, CR110 Service Hose Reel, FL10 Aerial Ladder, F18 Chemical Engine and more. In most cases they are the only kits in existence of these historic vehicles. Bill Low did design at least one 'non-fire truck' kit in his Will-O-Line - a Conestoga Wagon, advertised as being 1/24 scale, kit #B14 for $2.85 list as "This is another Museum Piece by Bill Low." After seeing these fire truck kits, I do not doubt that.

William H Low Co Combination Chemical Wagon - Wilo Line Fire Truck, 1/24, FC180

Multimedia Model Kit,   Box Condition: Good+

$89   

Very rare. Likely from the 1940s. William H Low Co., of Braintree Mass., issued the 'Wilo Line' which included a superb series of antique commercial firefighting equipment. The box top photo shows the actual model as assembled by Bill Low. The scale is given as 1/2" and the finished wagon is a large 8" long (13.5" with the front carriage bar). The kits were very advanced for the time and shared many of the pre-fabrication methods of Hudson Miniatures. Features plastic injection molded spoke wheels, precut large wooden parts, fully finished chemical tanks, completely cut and drilled ladder frames and pre-cut rungs, smaller parts including a great many fully carved of wood & others of metal and brass (chain), with a variety of metal stock as needed, sandpaper, complete instructions with detailed plans, additional drawings, complete text instructions and a big photo of the actual built model. The kit has never been started. Inventoried 100% complete including instructions/plans. The kits in this line include Amoskeag Steamer, Hose Reel, Hose Wagon, Chemical Engine and many others. In most cases they are the only kits in existence of these historic vehicles. Bill Low did design at least one 'non-fire truck' kit in his Will-O-Line - a Conestoga Wagon, advertised as being 1/24 scale, kit #B14 for $2.85 list as "This is another Museum Piece by Bill Low." After seeing these fire truck kits, I do not doubt that.

Revell Focke Wulf FW-200 C-5/C-8 Condor, 1/72, 04387

Plastic Model Kit,   Box Condition: Good+

$24   

Dated 2006 - kit is from new molds. Well detailed with over 200 parts. The kit has not been started. NOTE: missing missiles. The airplane is complete with all parts, decals and instructions.

RCM F-4 Phantom II - Early B through S Variants with GE and Spey Exhausts, 1/24

Vacuform Model Kit,   Box Condition: Bagged

$110   

Very large scale (1/24) SPECIAL ORDER vacuform kit with resin/metal details. Includes the critical parts for early B through S variants as well as USA and UK exhaust. Scratch building is required for smaller details between variants. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, struts, basic cockpit parts, etc. Does not include decals. Vacuform kits are only recommended for experienced builders who have experience with these kits and with scratch building.

Glencoe McDonnell XV-1 Convertiplane, 1/32, 5201

Plastic Model Kit,   Box Condition: Good+

$32   

From ITC molds. Large 1/32 scale kit with good detail for the time. Includes full interior, pilot and instrument panels, sliding clear entry doors, working rotors and prop, movable ailerons and US Army decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Delta 2 Campini Caproni, 1/72

Plastic Model Kit,   Box Condition: VG++

$46   

The Campini Caproni was a early jet with a unique propulsion system. A regular piston engine turned the compressor stages, then the compressed air was mixed with fuel in a combustion chamber behind the piston engine and ignited. Never started. Factory sealed bag with decals and instructions.

Hobby Craft de Havilland DHC-2 Beaver (U-6A / L-20) - USAF or Royal Australian Air Force, 1/72, HC1398

Plastic Model Kit,   Box Condition: Sealed Exc++

$32   

Still factory sealed. Nicely molded with all recessed panel lines and the fuselage molded in clear so the windows can be realistically represented. Includes colorful decals for both aircraft.

Hobby Craft Avro CF-100 Mk.V Canuck All-Weather Fighter, 1/72, HC1394

Plastic Model Kit,   Box Condition: Sealed NM

$45   

Sale Pending
Email for availability.

Still factory sealed. Nicely molded kit with recessed panel lines and accurate outline.

Airfix Apollo Saturn V, 1/144, 9170

Plastic Model Kit,   Box Condition: VG

$95   

Dated 1976 and well detailed. Includes individual LEM/CM/SM and a display stand. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.

Hasegawa Blue Angels History - A-4F Skyhawk - F9F Panther - F9F Cougar - F11F-1 (F11F1) Tiger - F-4J Phantom Kits, 1/72, 1209

Plastic Model Kit,   Box Condition: Sealed Exc++

$139   

Still factory sealed but the seal has small splits. Limited issue box set includes all five kits and full decals for the Blue Angles.

Airfix Martin RB-57E or B-57B Canberra, 1/72, 05018

Plastic Model Kit,   Box Condition: Sealed Exc+

$34   

Still factory sealed. Dated 1987 and nicely detailed for that time. Contains optional parts to build the rare recon version or US B-57B bomber and full decals and paint guide for both aircraft.

Airfix Martin RB-57E or B-57B Canberra, 1/72, 05018

Plastic Model Kit,   Box Condition: Fair

$26   

Rare recon version or builds US B-57B. The kit has never been started. Internal factory sealed bag including decals and instructions. The box is worn but the kit inside is like new.1

Fujimi Aichi type 99 Model 22 D3-A2 Val Carrier Dive Bomber - Markings for Two Aircraft, 1/72, 8

Plastic Model Kit,   Box Condition: Sealed NM

$26   

Still factory sealed. This model dates from when Fujimi made the finest models in the world. Features all fine recessed panel lines, cockpit detail, rotating propeller, dive brakes and centerline and wing mounted bomb loads. Decals represent two different aircraft.

Hasegawa Boeing F4B-4 - 1930's Biplane Fighter - (F4B4), 1/32, QP12

Plastic Model Kit,   Box Condition: Sealed NM

$40   

Still factory sealed. Nicely detailed, big-scale model from 1991. The F4B-4 was the Navy version of the P-12E and was very popular with all services. They served as front line interceptors from 1932 till 1938.

Hasegawa F-4B / F-4N Phantom II - (F-4B/N), 1/48, P5

Plastic Model Kit,   Box Condition: VG

$65   

Limited production issue. The Hasegawa 1/48 Phantom series is considered the finest F-4 kits every produced in this scale. All very fine recessed panel lines and superior detail. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.