Pioneer 2 Hawker Sea Fury T-20 and TWO Hawk Sea Fury, 1/72
Plastic Model Kit, Box Condition: Good
Sold
SALE!! Includes all three kits. All kit have not been started and are either in factory sealed bags or have been inventoried complete with all parts. Includes decals and instructions. The two Sea Furys are from newer molds and nicely done with all recessed panel line detail. Includes a color paint guide and decals for both FAA Historical Flight Yeovilton 1989 or Royal Canadian Navy 871 Squadron 1953. The Sea Fury T20 features all fine recessed panel lines, detailed gear wells and decals for the Royal Navy aircraft on the box art and the all red DLB aircraft.
RCM DeHavilland DHC-5 Buffalo, 1/72
Vacuform Model Kit, Box Condition: Bagged
Sold
SPECIAL ORDER vacuform kit with resin/metal parts set. Not shipped from stock. Kit is molded upon receipt of payment. Time from receipt to shipping your kit is usually 8 to 10 weeks. Contains vacuform basic airframe components, full size plans plus metal or resin parts such as wheels, prop, struts, etc. Does not include decals. Vacuform kits are only recommended for modelers who are experienced with this type of model. Special skills and scratch building experience are required. If you are curious, I highly recommend that you read the article 'How To Build Vacuform Model Kits' which is located on this website.
AMT 1940 Ford Sedan Delivery - Stock or Custom, 1/25, T253
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed. Nicely detailed kit. Features underside suspension and exhaust detail, stock Ford Flathead V-8 or tri-carb (3x2) Buick Nailhead engine, full interior, optional position rear cargo door and more. Other optional features include lowered front end, tube bumpers, Keystone mags, wide tires, custom decals, spotlights, tachometer, floor shifter, gauge package, header exhaust system, etc. Molded in color, clear, chrome and with rubber tires.
Life-Like 1949 Ford Tudor 2 Door Coupe - (ex-Pyro), 1/32, 09290
Plastic Model Kit, Box Condition: Exc
Sold
Ideal for slot car conversion. Life-Like release from original quality Pyro molds. Features detailed underside chassis with separately molded rear differential and drive shaft, full interior including door side panels and more. Never started. Inventoried 100% complete with all parts and instructions present. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. Even luckier is the fact that Life-Like reissued most of these kits.
Matchbox M47 Patton Tank, 1/32, 40990
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. I very strongly suspect that this is the ex-Renwal kit. Features rotating turret, elevating 90mm gun, hinged doors and hatches, flexible treads, detailed engine compartment and US Army decals.
Tamiya British Centurion MkIII Motorized, 1/35, MT130-698
Plastic Model Kit, Box Condition: Exc+++
Sold
Rare 1/35 scale motorized model with a completely metal gear box and all hardware. Even includes the RE-26 electric motor. Very nicely detailed and an excellent operating model when completed. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Steve McQueen Bullitt 2008 Ford Mustang Bullitt, 1/25, 85-4233
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Special issue dated 2008. Features detailed engine and engine compartment, interior and underside.
Lincoln Lockheed Constellation - BOAC, 1/140, 102
Plastic Model Kit, Box Condition: Good-
Sold
In 1956/57, Lincoln leased or purchased some Hawk molds and this Constellation is one of those. Nicely done 1/140 scale model with full color BOAC decals. The kit has never been started. The small parts are still in the factory internal sealed bag and the larger parts that were never sealed are inventoried 1 complete including decals and instructions. Lincoln International was based in Hong Kong. Plastic kits were not the primary business, but they established quite a line of them before discontinuing production in the late 1960s/early 1970s. Many molds moved to Kader, also in Hong Kong, who reissued the line. Many molds eventually found their way to the USA either through ATP (who purchased the excess kit stock when Kader sold out) or IM.
IM Viscount British European Airways BEA and Lockheed Constellation BOAC - Bagged, 1/100, 7
Plastic Model Kit, Box Condition: Good-
Sold
Includes both kits including the rare 1/100 Vickers Viscount. They have not been started. The Viscount has the small parts still factory bag sealed; the parts that were never factory sealed are complete including decals and instructions. NOTE: the Constellation is about 1/144 and is missing the nacelles and props; includes all other parts and decals; no instructions. These kits are from ex Lincoln, ex Kadder molds.
IM Bristol Britannia BOAC - Bagged, 1/166, 12
Plastic Model Kit, Box Condition: Good-
Sold
Ex Lincoln, Ex Kadder molds. Close to 1/144 kit of the fantastic British Airliner. With full color BOAC decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: although all parts are present, two props assemblies are each missing a blade and the blades are gone. There is a tear in the instructions but no important assembly information is missing.
Revell 1964 Ford Fairlane Tasca Thunderbolt Dragster, 1/25, 7450
Plastic Model Kit, Box Condition: Sealed VG+
Sold
Still factory sealed. 1990 Hot Rod magazine issue. Very nice kit with detailed chassis and engine, opening hood, full interior and more. Molded in maroon, clear, chrome plate and with rubber tires.
Addar B-58 Hustler and 707 Stratotanker 367-80 Dash 80 - 2 in 1 (Ex-Comet / ex-Aurora), 1/175, 904
Plastic Model Kit, Box Condition: VG
Sold
Addar was created by ex-Aurora associates and production spanned 1972 to 1977. The B-58 and 'Supertanker' (actually the Prototype 707 367-80) are ex-Comet kits that Aurora obtained when they bought out Comet. The B-58 is 1/175 scale and the Dash 80 is 1/300. The Dash 80 has the prototype marking decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions.
Revell C1124 Dragster Chrome Parts / C1142 Custom Car Wheels / TWO C1141 Competition Wheels and Mags - Bagged, 1/25
Plastic Model Kit, Box Condition: VG
Sold
Rare. Early to mid 1960s 'Custom Car Parts' issues with no box. NOTE: not complete. The dragster tree is missing about 4 small parts; the custom car wheels contains 3 each of all the hubcaps and brake drums and one competition wheels and mags tree is missing two small parts (bushing and one spinner) while the other one contains all bushing and spinners but only one set of four wire wheels and two mags with two trim rings as shown.
Berkeley Sinbad 40 - 40 Inch Wingspan Towline Launched Glider
Wood Model Kit, Box Condition: Good
Sold
Excellent kit dated 1946 on the plans and is from the older West Hempstead NY address. Part of the famous 'Sinbad' series tow-line gliders from Berkeley, this is most likely a mid 1950s issue. Includes the patented 'Spiral/Tow Control' rudder system. Big 40 inch wingspan - idea for RC. Features all die cut parts, full size plans and silk-span covering. The model has not been started. NOTE: all parts have been punched out neatly by an adult. A complete inventory was done and it is missing R2 and 1 tiny gusset - both are easily made and represented full size on the plans. Otherwise complete with all other parts, clear windshield material, balsa blocks, covering material and excellent plans/instructions. Berkeley is a very famous manufacturer of flying model kits from the Golden Age of flying aviation, about 1932-1954. Founded in 1933 by William Effinger, the company was quite progressive in producing quality kits - it was likely the Berkeley 'Buccaneer' was the first gas powered model in kit form. In the later 1930s, Effinger acquired the services of a very talented Henry Struck. Struck went on to design numerous award-winning kits under the Berkeley name. Berkeley weathered the post WWII recession and emerged as a major kit producer in the late 1940 and 1950s. These were great years for Berkeley and they produced some incredible and large kits. The company went bankrupt in about 1960 however. Fox engines (Duke Fox) bought the company and released the kits alongside his own FOX models and engines. This arrangement did not last, and in the early 1960s the Berkeley name disappeared from hobby shop shelves.
Aurora Cessna 310, 1/62, 283-50
Plastic Model Kit, Box Condition: Good-
Sold
1963 issue from ex-Comet molds. Neatly molded with all recessed panel lines, clear side and front windows, tip tanks, rotating propellers, display stand and full pinstripe decals. The kit has never been started. Inventoried 100% complete including decals and instructions. The box has damage/creases as shown, especially on the left top side. Aurora had started a line of inexpensive 29 cent kits in about 1957. The line was a success, and it was expanded. The line grew again when Aurora purchased the Comet molds, as most of Comet's line was very small scale kits, many of them civil aircraft like this one. It appears that Aurora was encouraged by the sale of the ex-Comet civil aircraft, as it expanded the line with it's own molds in the early 1960s.
AMT Grant King Sprint Racer, 1/25, T168
Plastic Model Kit, Box Condition: Good
Sold
Early issue sprint car features detailed Grant King chassis, 350 Chevrolet small block V-8 with Hill born fuel injection, mertex magneto, McGurk water/fuel/oil 'Tri Drive', CAE exhaust headers, weld wheels, Goodyear slick asphalt racing tires, Lee power steering, Stewart-Warner oil coolers, CAE direct drive in-out box, Halibrand quick change rear end, CAE transverse-leaf front/torsion bar rear suspension and positionable driver. Molded in white, chrome plate and with rubber tires. Never started. The parts that were factory sealed are still in factory sealed bags. The parts that were never factory sealed (chrome) have been inventoried complete. With instructions and decals.
Matchbox Boeing B-17G Flying Fortress with Regular or Cheyenne Tail Gun Position - 'Kwiturbitchin II' 414 BS 97 BG 15 Air Force Italy 1945 / 'Hikin' For Home' 322 BS 91 BG 8th Air Force / '2nd Patches' 346 BS 99 BG 15th Air Force Italy 1944, 1/72, PK-603
Plastic Model Kit, Box Condition: Good
Sold
Dated 1979 and probably the first issue. Nicely molded and detailed for that time, featuring very fine raised panel lines and some recessed panel lines, crew, cockpit, rotating turrets, wheels and props, movable rudder and decals for the three named aircraft listed. The model as never been started. Inventoried 100% complete with all parts, decals and instructions.
Frog Mirage IIIE/O - French Esc de Chasse 1/3 'Navarre' Nancy Air Base 1972 or Royal Australian Air Force (RAAF) No.3 Sq Butterworth 1972 (Wg. Cdr. P.J. Skully's Aircraft), 1/72, F400
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but seal has splits. Features optional position landing gear, load out with drop tanks and air-to-air missiles, optional parts for IIIE or IIIO versions and color paint guide and decals for the two aircraft listed.
Berkeley Colonial Skimmer Flying Boat Flying Model Airplane Kit, 1/12, 4-11
Wood Model Kit, Box Condition: VG-
Sold
Big 1/12 scale model with a 33.5 inch wingspan. Originally designed by Henry Struck as a gas powered model for free flight or control line, or can be converted to electric power and modern R/C. Features precision die cut balsa and plywood parts, numerous pre-cut balsa blocks, fully finished rubber wheels, fully formed wire gear struts, hardware, covering material, clear windows, superb full-size plans with instructions, big full color decal sheet and more. Berkeley is a very famous manufacturer of flying model kits from the Golden Age of flying aviation, about 1932-1954. Founded in 1933 by William Effinger, the company was quite progressive in producing quality kits - it was likely the Berkeley 'Buccaneer' was the first gas powered model in kit form. In the later 1930s, Effinger acquired the services of a very talented Henry Struck. Struck went on to design numerous award-winning kits under the Berkeley name. Berkeley weathered the post WWII recession and emerged as a major kit producer in the late 1940 and 1950s. These were great years for Berkeley and they produced some incredible and large kits. The company went bankrupt in about 1960 however. Fox engines (Duke Fox) bought the company and released the kits alongside his own FOX models and engines. This arrangement did not last, and in the early 1960s the Berkeley name disappeared from hobby shop shelves.
Combat Bell P-39Q Airacobra, 1/32
Vacuform Model Kit, Box Condition: VG-
Sold
Vac kit molded large (1/32) P-39 with recessed detail. Features many metal and resin details such as prop blades, instrument panel, seat, cockpit side instrument panels, control stick, machine guns, wheels, two types of exhaust stacks, main and nose gear struts and details, and more. Features full size three-view detailed plans. Never started. Factory sealed bag or inventoried 100% complete with all parts, clear canopy and plans/instructions.