Monogram Pro Modeler SBC-4 Helldiver, 1/48, 85-5935
Plastic Model Kit, Box Condition: Good
Sold
Highly detailed and features fine recessed panel lines and a large photoetched fret including dive brakes. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions. NOTE: missing decals.
Hasegawa Mitsubishi F-2B (F-16), 1/48, PT29
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Very finely molded with 185 parts.
Monogram General Dynamics F-16 Fighting Falcon, 1/48, 5401
Plastic Model Kit, Box Condition: Good+
Sold
Early F-16 with AIM-9 Sidewinders and two wing mounted drop tanks. Features full cockpit, fine panel lines, detailed wheel wells and more. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Hasegawa General Dynamics F-16A - Prototype #1 or #2 'Service' Gray Paint and Markings, 1/32, 100
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed but the seal has a hole as shown. This kit was awarded "Model of the Year" by Fine Scale Modeler magazine. Features very highly detailed cockpit and wheel wells, pilot and boarding ladder, detailed gun and gun bay with optional position hatch, detailed radome and optional position nose, optional position canopy and air brakes, full external stores as shown and decals for the 1st prototype or the second 'service' paint job prototype USAF 50746.
Monogram Grumman F-14A Tomcat - VF-142 USS America, 1/48, 5803
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. 1981 issue is well molded and detailed and includes colorful high-vis decals from VF-142 USS America. Model features full cockpit detail, optional position canopy, variable position wings, and four AIM-54 Phoenix, 2 AIM-9 Sidewinder and 2 AIM-7F Sparrow Missiles.
Monogram F-15E Strike Eagle Pro Modeler, 1/48, 85-5965
Plastic Model Kit, Box Condition: Sealed Exc
Sold
Still factory sealed. This is the superb Pro Modeler issue, most likely from Hasegawa molds. Features all very fine recessed panel lines, excellent cockpit and gear well detail, optional position canopy, very well-designed intakes and exhaust, optional position speed brake with well detail, optional intake covers, conformal fuel tanks, flattened tires, LANTRIN targeting and navigation pods, AIM-9 Sidewinder and AIM-120A missiles, drop tanks, datalink pod, GBU-15 and GBU-10 bombs and more. Includes a large and beautiful decal sheet for 494 Sqn USAFE Lakenheath for NATO TigerMeet 1998 in Lechfeld, Germany and 550 TFS 405 TTW USAF Luke AFB 'ZEE OUTLAW.'
Monogram Grumman F-14 Tomcat Aircraft of Desert Storm, 1/48, 5803
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. 1991 issue with the quality you expected from Monogram. Features very good cockpit detail, optional position canopy, variable position wings, and four AIM-54 Phoenix, 2 AIM-9 Sidewinder and 2 AIM-7F Sparrow missiles. Includes colorful low-vis decals from VF-142 USS American.
Entex Sturmgeschutz IV Type H - (ex-Bandai), 1/15, 8481
Plastic Model Kit, Box Condition: Exc
Sold
Rare and very large scale (1/15) tank from original Bandai molds. Features crew members, detailed suspension, realistic individual tread track construction, scale screen material, opening hatches, elevating gun and more. All the internal presentation cardboard is present and 'excellent.' All the parts that were factory sealed (almost all) are still factory sealed. The few that were not sealed are inventoried complete. With decals and instructions.
Hales FrogFlite Chipmunk Quick Build Series, FF110
Wood Model Kit, Box Condition: Good
Sold
An excellent, highly prefabricated and pre-decorated all-balsa flying model kit. Features quality die-cut balsa parts that are factory painted, all wood construction (no tissue is used), rubber motor, windshield material, fully formed wheels and metal landing gear struts, nose button and plastic prop, hardware and excellent illustrated step-by-step instructions & flying notes. Never started. The smaller parts are still in the factory sealed wax bag; the parts that were never sealed have been inventoried complete. Frogflite kits were made by A.A. Hales Ltd P.O. Box 33, Hinckley, Leicestershire, Great Britain. If constructed properly, they were fast to build and flew quite well.
Monogram Boeing 737 United Airlines (T-43A) - (Ex-Aurora) (Modified Molds), 1/72, 5415
Plastic Model Kit, Box Condition: Good-
Sold
Still the only 1/72 injection molded 737 and a big improvement from the Aurora kit. 1978 issue after Monogram bought Aurora's molds. Monogram only reissued the best and most commercially viable models. The 737 fell into that category but only after Monogram carefully modified the molds for accuracy. The result is an excellent early 737-100. First, Monogram filled in the side windows. Then they added very fine and accurate full panel lines to the entire model even down to the nacelles. and Much-needed flap hinge covers (fairings) were added to the lower wings. Contains greatly improved, full, excellent United Airlines markings and window decals. Could be converted to Military Transport T-43A, but you must furnish your own decals. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: decals were adult-cut in half so the 1st owner could store them in a zip lock bag. The result is that they are in amazing 'near mint' condition but they are cut in half.
Palmer 1940 Ford Custom Convertible, 1/32, 403
Plastic Model Kit, Box Condition: Good+
Sold
Suitable for Slot Car racing. Molded in a stunning gloss Pepto-Bismol Pink, clear and chrome plated plastic. Features a detailed underside chassis with separately molded front axle and suspension, full interior and even decals. NOTE: this kit has minor and very neat assembly. The two sides and hood have been glued to the chassis. Quality of the work done is 'near mint++.' All is perfectly straight, the gaps are as minimal as they could ever be and the rear deck dry fits perfectly. There is no other assembly. Inventoried complete with all parts, decals and instructions present.
Deans Marine SS City of Ely Liberty Ship - 54.5 Inches Long For Display or R/C, 1/96, 327
Wood and Metal Model Kit, Box Condition: Fair
Sold
A fantastic, full kit featuring a hand-laid fiberglass hull, one of the most extensive fittings kits I have ever seen and all other parts except r/c hardware, speed control, battery and running hardware. Builds to an incredible static display or an operating ship. Never started. The small parts are all still factory sealed. The larger parts were never factory sealed and have been inventoried complete with plans. The kit will be shipped in the original Dean's Marine shipping box surrounded by a much larger, sturdy double box. Must be shipped insured. Due to the huge size of the one-piece fiberglass hull, shipping will not be inexpensive.
Ideal Aeroplane & Supply RMS Queen Mary Ocean Liner - 12 inch Long Wooden Model Kit, 1113
Wood Model Kit, Box Condition: VG++
Sold
Rare ship model from 1940. Contains the Ideal 'Premolded Hull' which is a completely formed, hollow hull made from a wood composite. The hull is in excellent condition. Also includes full size plans/instructions, wood masts and stock as required and three sheets of printwood. The kit has never been started. Inventoried complete with all parts and plans.
Revell McDonnell Douglas F-4E Phantom II Hey Jude, 1/32, H198
Plastic Model Kit, Box Condition: Good+
Sold
1974 issue of this famous kit. Well detailed for that time with removable J79 engine, complete cockpits, removable radome and interior radar detail, tailhook, opening canopies, optional position landing gear and Sparrow missiles. The kit has never been started. The parts that were factory sealed are still in the factory sealed bag. The parts that were not factory sealed have been inventoried complete and includes decals and instructions.
California Model Co SPAD XIII - 18.75 Inch Wingspan Balsa Flying Aircraft, 1/16
Wood Model Kit, Box Condition: Exc+
Sold
Probably from the late 1940s or early 1950s. Stick and tissue flying model kit to a constant 1/16 scale with very nice quality. Kit can use rubber, CO2 or small gas motors for power. Features covering material, quality balsa printwood and strip wood, blocks as needed and beautifully drawn full size plans. The model has not been started. Inventoried complete with all parts and plans. Made by California Model Company out of Long Beach, CA USA. If you have more information on this manufacture, please email me. How far back they go is unknown; they claim to have the 'Know How of 30 Years Experience' on the box side, but that could be interpreted many ways. From the box there was at least a Spad, SE-5, Fokker DVII, Niuport and a Sopwith Camel for rubber power as well as the 'Spacer A-B' & 'Spacer 1/2A' and the indoor Featherette. We know they also issued some ex-Suydam railroad kits as well. From Bill Baker Jr - "California Model Company originated in Long Beach, Calif in the late 1940's or early 1950's. My grandparents, William (Bill) Loyal Baker and his wife, Ruth (Tripp) Baker were the founders. The company started out as primarily balsa based model aircraft but later, in the late 50's or early 60's, branched into the model RR craft kits and Cub Scout craft kits. They even had a balsa speed boat kit powered by a model airplane gas engine adapted to fit. When they retired, around 1968 or 1969, they sold the business and the "shop" in North Long Beach they built to house their business. I have many fond memories as a young child "working" with them in the shop, assembling kits. I have a few unbuilt kits today!"
Lindberg Dodge Dakota Sport, 1/25, 72714
Plastic Model Kit, Box Condition: Sealed NM
Sold
Still factory sealed. Dated 1998.
Monogram B-24J Liberator, 1/48, 5608
Plastic Model Kit, Box Condition: Sealed Exc+
Sold
Still factory sealed. Hard to find 'J' variant. Highly detailed with full interior, bomb bay and bomb load.
MPC 1974 Dodge Charger - Stock / Custom Panel Wagon / Drag Version, 1/25, 1-7407-250
Plastic Model Kit, Box Condition: Sealed Good
Sold
Still factory sealed. Very rare first issue, and even rarer in this condition. Has parts to build one of the three versions shown. Features detailed 440 CID engine and compartment, opening hood, full interior detailed underside and more.
ESCI M998 Ambulance Hummer, 1/35, 5032
Plastic Model Kit, Box Condition: Sealed VG++
Sold
Still factory sealed. Features detailed chassis, suspension and 4WD driveline, full interior with ambulance stretchers and top, optional position doors and more.
MPC 1973 Dodge Charger - Stock / Panel Wagon Tow Car / Custom Station Wagon, 1/25, 1-7307-225
Plastic Model Kit, Box Condition: VG
Sold
Very rare first issue from late 1972/73, and even rarer in this condition. Has parts to build one of the three versions shown. Features detailed 440 CID engine and compartment, opening hood, full interior detailed underside and more. Molded in white, clear, red-tinted clear, chrome plate and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: the instructions are completely usable but do have bug damage. The decals have bug damage; they are about 3% damaged (97% intact).