Hasegawa F-16CG (Block 40) Fighting Falcon Triple Nickel - 31st Fighter Wing 555Th FS / 51st Fighter Wing 36th FS, 1/72, 00169
Plastic Model Kit, Box Condition: Exc
Sold
Very nicely molded 1/72 Falcon which features detailed cockpit and pilot, detailed gear wells, boarding ladder, optional position canopy, targeting pods, ECM pods, AIM-9L Sidewinder missiles, drop tank and more. Never started and inventoried complete with all parts and includes decals for both aircraft and instructions.
Hasegawa F-16B Plus Fighting Falcon Flight Test Center, 1/72, 00033
Plastic Model Kit, Box Condition: Exc
Sold
Hard-to-find limited issue of this superbly molded kit that builds up to a wonderful model. Features all fine recessed panel lines, very good dual cockpits with pilot figure, detailed gear well detail, optional position canopy and pilot boarding stair and a very large variety of weapons. Includes a very large and colorful decal sheet for the box top photo aircraft. NOTE: this kit has very minor, 'professional' quality subassembly as follows: two seats to floor; turbine fan to exhaust cone. There is no other assembly. Inventoried 100% complete and includes decals and instructions.
Hasegawa F-16A Fighting Falcon Royal Signapore Air Force Black Knights, 1/72, 00188
Plastic Model Kit, Box Condition: NM
Sold
Hard-to-find limited issue of this superbly molded kit that builds up to a wonderful model. Features unique resin lower vertical tail for a correct RSAF aircraft, all fine recessed panel lines, good cockpit with pilot figure, detailed gear well detail, optional position canopy and pilot boarding stair and a very large variety of weapons. Includes a very large and colorful decal sheet for the Black Knight Demonstration Team with all red and black panels; decals are in 'near mint++' condition. Never started and inventoried complete with all parts and includes decals and instructions.
Hasegawa F-16D Brakeet IDF - Isreal, 1/72, 00174
Plastic Model Kit, Box Condition: Exc+
Sold
Superbly molded kit with 94 pieces that builds up to a wonderful model. Features all fine recessed panel lines, good cockpit and gear well detail, optional position canopy and pilot boarding stair and a variety of loadouts. Never started. The special resin parts are still in the factory sealed bag. All other parts have been inventoried complete and includes decals and instructions.
AMT 1965 Plymouth Valiant Signet 200 Two Door Hardtop - Craftsman Series, 1/25, 4001-100
Plastic Model Kit, Box Condition: Exc
Sold
Rare early issue. Nicely molded in bright red, chrome plate, clear, rubber tires and with metal axles and metal body screws. The kit has never been started. It has been inventoried and NOTE: missing (1) part, the mascot. Otherwise complete with all parts other and includes decals, white wall stickers and instructions.
Airfix HMS Cossack Tribal Class Destroyer - Craftmaster Issue, 1/600, S3-39
Plastic Model Kit, Box Condition: VG+
Sold
Early 1960s issue with great artwork. Like most all Airfix ship kits, this one is finely molded with good detail. The box art shows the Cossack chasing the German supply ship Altmark in the fjords. This lead to the famous raid and release of British POWs on the ship. Never started. Inventoried 100% complete with all parts, decals and instructions present.
Airfix HMS Daring Destroyer - Type Two Logo Issue, 1/600, F35
Plastic Model Kit, Box Condition: Exc
Sold
Rare, late 1950s issue. This is a full hull kit that is very well detailed for that time and includes a display stand. Never started and inventoried complete with all parts and includes decals and instructions.
Tamiya BMW 850i, 1/24, 24103
Plastic Model Kit, Box Condition: Good+
Sold
This kit is a highly detailed static display model with a fully detailed engine, front wheel differential drive & shafts, complete front and rear suspension, full exhaust, disc brakes, steering linkage, detailed engine compartment, opening hood, full interior, opening deck lid and more. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
LF Models SFKB Ka-309 Papagal - Bulgarian Bomber, 1/72, 7224
Resin Model Kit, Box Condition: Exc
Sold
Very highly detailed resin kit that is very finely molded. Includes a very good cockpit, photoetched details, cast metal main landing gear struts, full decals, paint guide and complete instructions. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions.
SMER Focke-Wulf Fw-56 Stosser / Blackburn B-6 Shark / Dewoitine D-500 / D-501, 1/72, SE0856
Plastic Model Kit, Box Condition: VG to Sealed Exc
Sold
SALE! Includes all three kits. The FW-56 and Blackburn Shark are still factory sealed. The D-500 / D-501 is never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
SMER Vultee V-72 / A-31 Vengeance Limited Edition / Nieuport-Delage Ni-D 622 / Breguet 693, 1/72, SE0854
Plastic Model Kit, Box Condition: Good to Sealed Exc
Sold
SALE! Includes all three factory-sealed kits.
Trumpeter TWO Hawker Sea Fury FB.11, 1/72, 01631
Plastic Model Kit, Box Condition: Exc
Sold
SALE!! Includes two kits in the one box shown. Kit #1 is never started and all parts are still in the factory sealed bags. Includes decals and instructions. NOTE: Kit #2 has very minor and 'professional' quality subassembly as follows: seat and instrument panel to cockpit floor. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present.
UM Models TWO AS-2 Airfield Starter / TWO BZ-38 Refueller Trucks / TWO GAZ-AAA Trucks / TWO GAZ-AAA With 57mm Anti-Tank Gun ZIS-2, 1/72, 321
Plastic Model Kit, Box Condition: Exc
Sold
SALE!! Includes all eight kits - there are two in each box. All are never started. They are either still in the factory sealed internal bags or inventoried complete. Includes all paperwork.
Airfix German Battlecruiser Scharnhorst - Craftmaster Issue, 1/600, S3-129
Plastic Model Kit, Box Condition: Good-
Sold
1960s issue with wonderful Craftmaster artwork. This is the only model ever made of the early Scharnhorst with the 'straight' bow. This was before her modification with the 'Atlantic' bow after she and her sister proved to be very 'wet' ships forward. Nicely molded full hull model. Never started. Inventoried 100% complete with all parts and instructions. This is one of two known box issues for the Craftmaster Scharnhorst. This one has black side panels and S3-129 as the kit number.
Matchbox Focke Wulf Ta-154 - Moskito, 1/72, 40200
Plastic Model Kit, Box Condition: Exc
Sold
1995 issue of Germany's version of the 'Wooden Wonder.' Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Revell Patrol Boat USCG Campbell - Coast Guard Cutter, 1/301, H454-200
Plastic Model Kit, Box Condition: Good-
Sold
1966 hardbox issue of this beautiful and successful Coast Guard Cutter. The model is from the well detailed, original 'S' kit tooling. This is a large-scale, full hull model with rudder and propeller, detailed superstructure, separately molded main and secondary armament, ships boats, davits, search lights and much more. Never started and inventoried complete with all parts and includes decals. flag sheet and instructions.
Cleveland Supermarine Spitfire - 27.6 Inch Wingspan Flying Model Airplane Kit, 1/16, SF-73
Vaccuform Model Kit, Box Condition: Good
Sold
This is a late 1930s/early 1940s 'Deluxe Edition' of this Cleveland SF ('Scale Flying') model in museum scale of 1/16. This exact model is in fine condition with a 'Good' condition box, all of the original internal cardboard presentation material, glass bottles of liquids (glue and dope) and is never started and complete. All Cleveland kits were exceptionally complete and this one is no exception. Because it is the deluxe version, it comes with a set of four large glass bottles of factory fluids - paint/dope and glue - still factory sealed in brown paper and factory tape, very high quality balsa printwood and pre-cut strip wood, balsa blocks, other wood and metal stock as required, completely finished wheels, black fiber propeller blades, a small paper envelope with smaller parts inside, full color insignia sheets, clear material for the canopy and covering material. Includes Cleveland's highest quality plans. Never started and it has been inventoried 100% complete with all parts and instructions. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called 'The Aviation Craze' that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest operating single-owner model airplane supply business, called Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviations great Recruiter, Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.
Cleveland Fokker D-7 - 20.5 Inch Wingspan Balsa Scale Flying Aircraft (DVII), 1/16, M-15
Wood Model Kit, Box Condition: VG
Sold
True-scale flying model from 1948 and one of the famous Cleveland kits in the agreed museum scale of 1/16. Features many sheets of high quality printwood, factory cut stringers and spars, partially carved nose block / radiator, other wood blocks as required, fully formed wheels, thrust button and propeller hub, metal and wood stock, complete (photocopied) insignia sheet and covering tissue. Includes the superb Cleveland plans & instructions. Never started and inventoried; it is complete other than the insignia sheet, of which I have provided a high quality photocopy. Otherwise complete with all other parts and paperwork. The Cleveland Model and Supply Company played a pivotal role in the development of true scale models. In 1909 Bleriot's English Channel flight caused a surge in aviation and model aircraft around the globe. Several companies were ideally positioned to take advantage of the aviation craze. In the USA, Wading River Manufacturing Co. (1909), White Aeroplane (1911), Ideal Model Aeroplane (1911), Broadfield Model Aeroplanes (1919) were among these pioneers, offering everything from plans and parts to complete kits and ARF models. Lindbergh's 1927 crossing of the Atlantic Ocean caused an even bigger world-wide phenomenon called 'The Aviation Craze' that extended up to the start of World War II. Many companies such as Megow, Guillow's and others started right around the time of Lindbergh's flight. Some of these models flew and flew well, but they all had one thing in common - were generally not accurate scale representations. In 1929, a youngster named Ed Packard had a very advanced dream to produce incredibly accurate, true scale models that flew perfectly. This radical idea established the world's longest operating single-owner model airplane supply business, called Cleveland Model and Supply Company. To this day, Cleveland models are treasured as the most accurate flying scale models produced. The fact that Mr. Packard started and successfully grew this business during The Great Depression is a testament to his ideals and business skill. I highly suggest the excellent book called 'Aviations great Recruiter, Cleveland's Ed Packard' by H.L. (Herm) Schreiner. It is an excellent history of the man, his company and the times of the Golden Age of Model Aviation.
Airfix B-17G Flying Fortress - Craftmaster Issue, 1/72, 1-129
Plastic Model Kit, Box Condition: VG++
Sold
Early issue from the 1960s. This is the hardbox in the 'long box' format, perhaps the hardest to find of the three variants. The dramatic Craftmaster artwork shows 'A Bit O'Lace' just past the target and the #2 engine in flames with a feathered propeller. Features many moving parts: turrets rotate and guns elevate, landing gear retracts/extends, wheels and propellers turn, all control surfaces move and more. Never started. Inventoried 100% complete with all parts, decals and instructions.
UPC Long Tom And Tractor - (Long Tom 155mm Gun And High Speed Tractor ex Revell ex Life-Like), 1/40, 2155-250
Plastic Model Kit, Box Condition: Exc+
Sold
A very rare model from the original 1950s Revell "S" issue molds. Highly detailed and includes both kits - the High Speed Tractor and the Long Tom 155mm gun. Has many working features - the tractor has movable tracks and working bogies, rotating and elevating machine gun, driver and interior details. The gun can be stowed for transport with the M-4 and all extra gear to do this correctly is supplied. The Long Tom features and elevating barrel, moving limbers and detailed mechanism. Never started and inventoried complete with all parts and includes decals and instructions. UPC stood for Universal Powermaster Corporation which was based out of New York City, NY. UPC did not cut their own molds, but bought kits already molded from other manufacturers and re-boxed the kits in the USA. Scott Eidson, the famous artist best known for his artwork with Revell, also did UPC box art in the 1960s. All UPC production ended in the 1970s. These molds must have had a very interesting history. The molds were cut in 1955 or 1956, either at Adams or by one of Revell's contractors. It appeared to be part of the Adams/Revell 1/40 line but Adams never issued the kit. The famous HO model train manufacturer Athearn purchased the Adams molds and ended up with the jeep. Ahtearn used the name SNAP for all plastic kit releases and slightly modified the molds by adding their name & logo to a part (or two) of each kit. Then UPC (Universal Power Master) either leased or purchased (probably the former) the Adams molds from SNAP in the 1960s. While most UPC kits say 'Made in Japan' the ex-Adams models do not and say 'Made in USA'. Things get even more interesting with the Life-Like issue. How Life-Like came across the molds is unfortunately unknown but it may have been in a bulk purchase of molds from Athearn since there were in the same general part of the country. This is simply conjecture, however.